Equipment information:

Icom IC-M600 Transceiver
Manufacturer:
Icom
Model: IC-M600
Date: 1991
Category: Radio, Communication
Group: Transceiver
Description: VHF MARINE TRANSCEIVER
Information:
                                    • One-touch emergency frequency access capability.
• Full 150 W* (PEP) of output power.
• Excellent frequency stability of ±20 Hz in the -30°C ~ +
60°C range.
• DDS (Direct Digital Synthesizer) system for a rapid lockup
time and high quality frequency oscillation.
• Convenient frequency selection via keyboard entry or
rotation of the main dial.
• Clarity control for up to ±150 Hz in 10 Hz steps.
• 99 user-programmable memory channels.
• 192 pre-programmed ITU channels and 282 new ITU channels
effective July 1991.
• Overload protection against open, shorted or mismatched
antenna connections and thermal overloads.
• General coverage receiver.
• Splash-resistant front panel.
• Keyboard and function display backlighting.
• Audio activated squelch.
• Noise blanker circuit.
• AGC (Automatic Gain Control) circuit.
•Accepts an optional AT-120 HF AUTOMATIC ANTENNA TUNER.
•Optional UT-62 ALARM UNIT for alarm signal transmission.
* For 25.0000~26.9999 MHz: More than 60 VV

These manuals are available for the above equipment:

Icom -- IC-M600 -- User Manual
File name: Icom-7499-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 28
Size: 2.66 Mbytes (2788182 Bytes)
Language: english
Revision:
Manual-ID/Number: A-5168H-1US
Date: 1991
Quality: Scanned document, all readable.
Upload date:
MD5: 9d03e9839cf2cec009e97e8c38ace835
ed2kID: 033ff33ab95e7f489aa00f98e2acda71
Downloads: 31 since 09 January 2016
Information:
FOREWORD..........................................
EXPLICIT DEFINITIONS.......................
IMPORTANT SAFETY PRECAUTIONS
FEATURES.............................................
TABLE OF CONTENTS..................................ii
UNPACKING.................................................... ii
1 PANEL DESCRIPTION............................... 1-4
- Switches and
controls...................................... 1—2
- Rear
panel.................................................................3
- Function
display.....................................................4
2 INSTALLATION..........................................5-8
- Mounting the
transceiver......................................5
- Rear panel
connections........................................6
- Installation
example...............................................7
- Ground
connections...............................................8
- Antenna
connections..............................................8
- Power
source...........................................................8
3 EXTERNAL EQUIPMENT
CONNECTIONS.......................................9-10
- AT-120 HF AUTOMATIC ANTENNA TUNER.... 9
- Internal setting for a non-lcom antenna
tuner............................................................................9
- MN-100, MN-100L ANTENNA MATCHERS .... 10
- OPC-302, OPC-303 ACC CABLES....................... 10
4 SELECTING A CHANNEL.....................11-12
- Direct selection of 2182 kHz.............................. 11
- Selecting a memory channel..................... 11—12
5 SETTING A FREQUENCY.................................. 13
- Setting a
frequency.............................................. 13
- Changing the frequency in 100 Hz steps........13
6 OPERATING RULES AND GUIDELINES . . . 14
7
RECEIVING.....................................................15-16
-
Receiving.........................................................
15—16
8
TRANSMITTING...................................................
17
-
Transmitting...........................................................
17
- Setting the transmit power................................ 17
9 MEMORY OPERATION...................................... 18
- Programming a frequency.................................. 18
- Changing the operating mode........................... 18
- Clearing memory information............................ 18
10 ALARM SIGNAL (OPTIONAL)......................... 19
- Transmitting an alarm signal on 2182 kHz___19
- Distress call
procedures......................................19
- Testing an alarm
signal...................................... 19
11 OPTIONAL UNIT INSTALLATION.................20
- UT-62 ALARM
UNIT................................................20
- ACC
cables.............................................................20
12
MAINTENANCE.....................................................21
- Replacing a
fuse...................................................21
-
Cleaning..................................................................21
13 TROUBLESHOOTING..........................................22
14
SPECIFICATIONS.................................................23
15
OPTIONS...................................................................24
Icom-7499-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the fifth month of the year?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics