Equipment information:

Solartron 1260 Analyzer
Manufacturer:
Solartron
Model: 1260
Date: 1987
Category: Measurement instruments
Group: Analyzer
Description: IMPEDANCE/ GAIN-PHASE ANALYZER
Information:
                                    The 1260 Impedance/Gain-Phase Analyzer uses powerful
microprocessor-controlled digital and analog techniques to
provide a comprehensive range of impedance and frequency
response measuring facilities. These include:
► Single sine drive and analysis of the system or component
under test over the frequency range 10μHz to 32MHz.
t Measurement integration, and auto-integration, of the
analyzer input, for harmonic and noise rejection.
► Sweep facility, for any one of three measurement
variables, frequency, amplitude, or bias.
► A comprehensive range of voltage and current transfer
characteristics, each one available from the original base
data, which includes:
• polar, log polar, and Cartesian coordinates of the voltage
measurement result,
• polar and cartesian coordinates of current transfer
characteristics,
• polar and cartesian coordinates of impedance and admittance,
• inductance or capacitance values, with resistance, quality
factor, or dissipation factor, for series or parallel circuits.
► Plotter output, of immediate or filed data, to a digital
plotter on the GPIB.
» Limit check and data reduction facility. Data output can
be confined to those results that fail within, or outside,
user-defined values.
► Output ports selectable from: RS 423, GPIB, and the
History File.
► Result scaling, that includes: a normalization facility
„that separates the desired results from confusing
background data; and, for impedance measurements, a nulling
facility that compensates for stray capacitance and inductance.
► Vernier facility, which allows the drive to be adjusted
whilst measurements are being made.
► Learn program facility, which allows the instrument to
learn a series of control settings and commands.
► Component sorting, manual or automatic.
► Self test facility,
► Local control from a simplified key panel, or remote
control from the GPIB.

These manuals are available for the above equipment:

Solartron -- 1260 -- User Manual
File name: Solartron-7349-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 295
Size: 8.19 Mbytes (8587898 Bytes)
Language: english
Revision: A
Manual-ID/Number: 12600012
Date: December 1987
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 03930813c28164aef531a59445c78873
ed2kID: ae9642b4e489b575dd9b1c9cdd0461bd
Downloads: 50 since 15 November 2015
Information:
2
Describes how to install the instrument. This procedure
should be followed implicitly, to ensure safe and reliable
operation of the intrurnent.

3
Introduces the front panel controls and, by means of simple
examples, shows you how to start using the instrument.

4
Summarises the control menus. This information, which also
appears on a blue pull-out card at the front of the manual,
is intended as a memory aid for experienced users.

5
Is an encyclopedia of menu terms and explains the meaning
and background of each individual control setting.

6
Explains how to connect the instrument to the item under test.

7
Gives detailed information on how to control the instrument
remotely, from the GPIB. Guidance in the use of RS 423 is
given also.

9
Lists the error messages. Error messages are displayed (and
an error code is output to a remote device) when a bad
command has been given to the instrument or an unacceptable
control condition exists.

10
Shows how the measurement results may be scaled and/or
limits checked.

11
Shows how the instrument may be made to store a series of
commands, to be executed later as a learnt program,
Solartron-7349-Manual-Page-1-Picture
Start Free Download


Solartron -- 1260 -- Service Manual
File name: Solartron-7350-Manual-Page-1-Picture
Manual Type: Service Manual
Pages: 245
Size: 7.56 Mbytes (7924193 Bytes)
Language: english
Revision: 4A
Manual-ID/Number: 12600013
Date: July 1993
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 2c8c3cb6c2b320f43af37f35501f1ed4
ed2kID: cbc912ce6f1d808c9520db269b5e74a2
Downloads: 35 since 15 November 2015
Information:
MAINTENANCE MANUAL
Volume 1

1 INTRODUCTION TO THE 1235-60
1 General
.........................................................................
1.3
2 Safety
..........................................................................
1.3
2 SYSTEM DESCRIPTION
1 General
.........................................................................
2.3
2 System Configuration
.................................................. 2.3
3 System Control
............................................................ 2.3
4 Power-up State
............................................................ 2.3
5 Command Structure
................................................... 2.3
6 Stimulus Signal Generation
...................................... 2.4
7 Signal Analysis
............................................................ 2.4
8 Post Analysis Data Processing and Output
Data Control
...............................................................
2.5
9 PCB
Locations.............................................................
2.5
3 1255-60 BUS
1 General
.......................................................................
3.3
2 1250 Bus Configuration
............................................. 3.3
3 Device Address and Data Bus
..................................... 3.3
4 Processor Interrupt
..................................................... 3.4
5 Board Presence
........................................................ 3.4
6 Device Request
........................................................... 3.4
7 Bus Timing
..................................................................
3.4
B DC Supply Lines
........................................................... 3.4
4 SELF TEST FACILITIES
1
Introduction..................................................................
4.3
2 Memory Map
................................................................
4.3
3 Power up
.......................................................................
4.3
4 Break
..........................................................................
4.3
5 The Seif Test Facility
.................................................. 4.4
6 SelfTest Details
........................................................... 4.7
7 The Processor Boards
Leds......................................... 4.11
5 BOARD DESCRIPTIONS
1 Foreword
....................................................................
5.3
2 Front Panel Interface (PCB2)
..................................... 5.4
3 Power Fail Detect (PCB5)
......................................... 5.11
4 High Frequency Analyzer (PCB 10)
.......................... 5.13
5 High Frequency Generator (PCB14) .........................
5.23
6 Generator (PCB15)
................................................... 5.27
7 HF Sythesizer (PCB16)
.............................................. 5.33
8 Analyzer Controller (PCB17)
................................... 5.37
9 Sythesizer (PCB18)
................................................... 5.43
10 Main Processor (PCB22)
............................................ 5.47
11 Current-to-Voltage Converter (PCB31) ................... 5.55
6 CALIBRATION OF 1255 & 1260
A Calibration of 1255
..................................................... 6.1
B Calibration of 1260
................................................... 6.53
Solartron-7350-Manual-Page-1-Picture
Start Free Download


Solartron -- 1260 -- Service Manual
File name: Solartron-7351-Manual-Page-1-Picture
Manual Type: Service Manual
Pages: 120
Size: 4.81 Mbytes (5040193 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date: 1993
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 1e4af550459ed0f5cae920d5a5c5b2a2
ed2kID: 356906ca437cdbc67ae1258826ac2bd8
Downloads: 31 since 15 November 2015
Information:
MAINTENANCE MANUAL
Volume 2

1
GENERAL
7.3
2
PCB LOCATIONS
7.3
3
ACCESS TO PCBs AN D COMPONENTS
7.4
3.1
Top Cover Removal
7.5
3.2
Bottom Cover Removal
7.6
4
PCB AND COMPONENT REMOVAL
7.6
4.1
Pcb 2 Front Panel Interface
7.7
4.2
Peb 31 Current-to-voltage Converter
7.8
4.5
Membrain Switch Panel
7.8
4.6
Fan
7.9
4.7
Pcb 5 (Power Fail)
7.10
4.8
Power Supply
7.10
4.9
Mother board
7.10
Fig.
7.1
1255 Pcb Locations
7.1
7.2
1260 Pcb Locations
7.4
7.3
Top Cover Removal
7.5
7.4
Remo val of Front Panel Assembly
7.6
7.5
Removal of Front Panel Interface
7.7
7.6
Pcbs 31 and 2 on Front Panel Assembly
7.8
7.7
Component Removal
7.9
Solartron-7351-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the word for the number 9.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics