Equipment information

Singer 18U322 Amplifier
Manufacturer
Singer
Model 18U322
Date
Category: Audio, Video, TV, Multimedia
Group Amplifier
Description
Information
                                    Machine 18U322 is a cylinder bed machine with the machine
pulley at the left hand side. It is fitted with a hollow
needle bar. The bobbin winder is attached to the table.
Machine 18U322 is designed for vamping shoes, etc., and for
stitching other varieties of work in light and medium weight
leathers.
A cloth plate which can be readily attached or detached is
furnished at an additional charge when specified on order.
Machine 18U322 has one needle and a long beak shuttle, a
roller presser and a drop feed at the left of the needle.
The cylinder bed is 2-1/2 inches in diameter and 10-1/2
indies in length from the needle to the base of the arm. It
is used for shoe work.

These manuals are available for the above equipment:

Singer -- 18U322 -- User Manual
File name Singer-7341-Manual-Page-1-Picture
Manual Type User Manual
Pages 10
Size 294.85 Kbytes (301927 Bytes)
Language english
Revision
Manual-ID/Number
Date
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 797ca9b6c42d28caac38dfd396f935cb
Downloads 127 since 15 November 2015
Information
DESCRIPTION ...............................................1
SPEED.....................................................1
TO OIL THE MACHINE ......................................1
NEEDLE ...................................................2
TO SET THE NEEDLE........................................2
THREAD ...................................................2
TO THREAD THE NEEDLE OF THE MACHINE......................3
TO REMOVE THE BOBBIN FRON! THE MACHINE....................3
TO WIND THE BOBBIN ......................................4
TO THREAD THE SHUTTLE....................................5
TO REPLACE THE SHUTTLE IN THE MACHINE....................ό
TO PREPARE FOR SEWING....................................7
TO COMMENCE SEWING .....................................7
TO REMOVE THE WORK .....................................7
TENSIONS ...............................................7
TO REGULATE THE TENSIONS ...............................8
TO REGULATE THE LENGTH OF STITCH .......................S
TO REGULATE THE PRESSURE ON THE MATERIAL ...............8
INSTRUCTIONS FOR ADJUSTERS AND MACHINISTS
TO SET THE NEEDLE BAR AT THE CORRECT HEIGHT.............8
TO RAISE OR LOWER THE FEED DOG .........................8
Singer-7341-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the last letter of the word satellite.
Powered by Commentics