Equipment information

Racal 1995 Counter
Model 1995
Date 1988
Category: Measurement instruments
Group Counter
                                    The 1995/1996 system universal counter utilizes a
microprocessor-controlled multiple register data acquisition
IC for counting and timing to 200 MHz (1.3 GHz on the 1996
with Input C).
The counter provides the following measurement functions:
frequency, frequency ratio, period, 1-ns resolution time
interval, automatic pulse parameters (including duty cycle
and slew rate), phase, and totalize. Time interval averaging
is available via software-derived functions.
The frequency range on Inputs A and B is 0 to 200 MHz; 40
MHz to 1.3 GHz on Input C using an additional board. Trigger
levels on Inputs A and B can be set manually via the front
panel keypad or via auto-trigger with 50% trigger points.
The DC offset component of the input signal may be tracked
by auto-triggering in between readings in the manual mode
(peak tracking). , Use of a timing error correction (TEC)
technique permits measurements with 9-digit resolution m one
second and a single-shot time-interval resolution to 1 ns.
The counter is housed in a 3.5n high X 19" wide full-rack X
19" deep standard corporate enclosure. Total weight does not
exceed 22 lbs (10 kg). Unit is adaptable to rack or bench
top use.

These manuals are available for the above equipment:

Manual Type Service and User Manual Racal-7295-Manual-Page-1-Picture
Pages 294
Size 10.91 Mbytes (11443543 Bytes)
Language english
Manual-ID/Number 980539
Date December 1988
Quality Scanned document, all readable.
Upload date
MD5 31beb4d013a248f7953a84230bc79695
Downloads 115 since 25 October 2015
This manual is organized into eight sections:
SECTION 1. General Information: published specifications,
safety considerations, product support, general description,
and options.
SECTION 2. Installation <5c Preparation for Use: unpacking
and initia inspection, reshipment, setup, field installation
of options, power; connections storage and ventilation.
SECTION 3. Local Operation: bench operation, including
general operating information, panel descriptions, and
measurement procedures.
SECTION 4. System Operation: GPIB system operation.
SECTION 5. Oieory of Operation: general theory of operation.
SECTION 6. Maintenance: Performance tests and basic
calibration informatio: for the 1995/1996.
SECTION 7. Drawings: assembly and schematic drawings.
SECTION 8. Parts List: replaceable parts and assemblies.

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics