|Power Designs Inc. TP340A Power supply|
Power Designs Inc.
|Description||REGULATED DC POWER SOURCE|
This triple output regulated DC power source is suitable for general purpose laboratory and industrial applications. It features adjustable and independent current limiting and overvoltage crowbar protection for each output. A fault lamp indicates crowbar operation or an overload condition. The following description refers to the three outputs as Source A (“A”), Source B ("B”) and Source C ("C”) respectively. The power supplied by "A” and “B” is obtained from four binding posts on the front panel. There is an internal connection between the negative terminal of "A” and the positive terminal of "B” when the TRACKING function is engaged. In this mode the DC+ terminal on Source “A” produces a positive voltage with respect to COMMON. The DC- terminal on Source “B” produces a negative voltage with respect to COMMON. When the TRACKING function is OFF, both sources are isolated from each other. A front panel TRACKING switch provides individual control of each source or automatic Master/Slave operation. In this mode source "B" tracks source “A”. Source “C” provides power by means of two binding posts that are isolated from ground. This source may be operated in either polarity with respect to chassis or left floating. All outputs may be operated simultaneously at full capacity with no derating.
These manuals are available for the above equipment:
|Power Designs Inc. -- TP340A -- Service and User Manual|
|Manual Type||Service and User Manual|
|Size||1,012.85 Kbytes (1037159 Bytes)|
|Quality||Scanned document, reading partly badly, partly not readable.|
|Upload date||02 October 2015|
|Downloads||144 since 02 October 2015|
This manual contains instructions for the installation, operation and maintenance for Power Designs Model TP340A and TP343B triple output DC regulated power supply.
|Start Free Download|
No comments yet. Be the first!