Equipment information

Power Designs Inc. 5020 Power supply
Manufacturer
Power Designs Inc.
Model 5020
Date 1979
Category: Measurement instruments
Group Power supply
Description REGULATED POWER SUPPLIES
Information
                                    This regulated power source is designed to provide extremely
accurate and stable D.C. output with less than 100
microvolts of ripple and noise content.
Two dual concentric decade switches provide digital
presentation of a selected output voltage to four places. A
calibrated potentiometer permits interpolation to a fifth
digit (Model 2020B) and sixth digit {Models 5020 & C500).
The mode! 2020B includes a toggle switch for 10-20 volt
operation with no change in resolution. The calibration for
all models is 0.1% of the dial settings.
The output voltage of the supply may be remotely programmed
with an external resistance without loss of accuracy. Rear
terminals provide for remote sensing of the output voltage
at the load. Calibrated output is available through either
pane! mounted binding posts of a rear mounted terminal
strip. Metering is provided by means of a dual scale
edgewise meter. A function switch selects voltage or current
monitoring.
Current limiting is continuously adjustable by means of a
front pane! control. The “pull-to- set” switch permits
adjustments of the current limit point without shorting the
output terminals. A flashing panel lamp indicates an
overload or short condition.
The power supply is floating with respect to the chassis
permitting positive or negative polarity. The output may be
continuously shorted without damage to the power source.
Each power supply is “burned in” for 100 hours prior to test
and shipment with calibration data. The power source is
housed in a blue enamel cabinet. The front panel is brushed
aluminum with black nomenclature. A tilting bail assembly is
provided for ease of viewing. Panel adaptors are available
for mounting one or two units in a standard 19 inch rack.

These manuals are available for the above equipment:

Power Designs Inc. -- 5020 -- Service and User Manual
File name Power_Designs-7237-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 20
Size 1,012.05 Kbytes (1036337 Bytes)
Language english
Revision
Manual-ID/Number
Date 1979
Quality Scanned document, all readable.
Upload date
MD5 93868703a2189011cb5c7b2224c14a5f
Downloads 204 since 02 October 2015
Information
This manual contains instructions for the installation,
operation and maintenance for the Power Designs family of
Precision Calibrated Low Voltage Power Sources.
Power_Designs-7237-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the third letter of the word castle.
Powered by Commentics