Equipment information:

Kikusui Electronics Corporation PLZ1002W Other
Manufacturer:
Kikusui Electronics Corporation
Model: PLZ1002W
Date:
Category: Measurement instruments
Group: Other
Description: ELECTRONIC LOAD
Information:
                                    Model PLZ1002W Electronic Load is rated for loading voltage
3 - 110 volts, loading current 0 - 200 amperes, and wattage
1000 watts. The PLZ1002W can be operated either in a
constant current mode or in a constant resistance mode.
The PLZ1002W allows dynamic load test by switching between
two different levels of load current with its internal
oscillator and electronic switching circuit. This function
is available when in either the constant current or
resistance mode.
The PLZ1002W is incorporated with protectors against
overvoltage, overcurrent, overpower, and reverse polarity
connection. It has a digital voltmeter/ammeter of 3-1/2
digits. It has a fan for forced air cooling.
Features
(1) The PLZ10Ö2W employs power MOS FET, thereby eliminating
secondary breakdown and improving the reliability.
(2) A digital voltmeter/ammeter of 3-1/2 digits is provided.
(3) Two 10-turn helical potentiometers are provided to set
individual levels of loading current.
(4) The loading current can be switched between two
different levels, thereby allowing dynamic load test.
(5) The loading current can be remote-controlled with a
voltage signal (when in the constant current mode) or with a
resistance signal (when in the constant current or
resistance mode).
(6) Two or more units or PLZ1002W can be operated in
parallel in a master-slave mode.
(7) The PLZ1002W is incorporated with protectors against
overvoltage, overcurrent, overpower, overheat, and inverted
connections of input. These protectors reset automatically,
(8) The PLZI002W is incorporated with a rapid-response rush
current suppression circuit.
(9) Optional frames and brackets are available to install
the PLZ1002W on a rack of the EIA Standard or the JIS Standard.

These manuals are available for the above equipment:

Kikusui Electronics Corporation -- PLZ1002W -- User Manual
File name: Kikusi-7059-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 80
Size: 915.17 Kbytes (937131 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date:
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: e75150346e3a73c3d5738066b6d7b8cd
ed2kID: f7331cf4c91445d581d6a52cbfa5d231
Downloads: 28 since 14 August 2015
Information:
1. GENERAL .. .............................................. 1
1.1 Description ........................................... 1
1.2 Specifications ....................................... 3
2. OPERATION METHOD
............................................ 6
2.1 General Precautions .................................. 6
2.2 Panel Description ..................................... 9
2.3 Initial Setting ....................................... 12
2.4 Constant Current Mode ................................ 13
2.5 Constant Resistance Mode ........................ 14
2.6 Switching Mode ........................................ 15
2.7 External Sensing with Voltmeter .................... 16
2.8 Remote Control When in Constant Current Mode ...... 17
2.9 Remote Control When in Constant Resistance Mode ... 19
2.10 Master-Slave Parallel Operation .................... 19
3. OPERATING PRINCIPLES
........................................ 22
3.1 Constant Current Operation ...................... ... 22
3.2 Constant Resistance Operation ...................... 22
3.3 Block Diagram of PLZ1Ö02W ........................... 23
4. MAINTENANCE
.................................................. 24
4.1 Cleaning the Dust Filter ...................... 24
4.2 Removing the Case Cover .............................. 24
4.3 Inspection and Cleaning ............................ 25
4.4 Calibrating the Voltmeter .......................... 25
4.5 Calibrating the Ammeter ............................. 26
4.6 Range Calibration for Constant Resistance Mode .... 27
4.7
Range Calibration (200A/20A) for Constant Current
27
4.8
Calibration of Remote Control Voltage for Constant Current
Mode ..........................................
28
4.9
29
4.10
Adjustment of Overvoltage Protector (OVP) .........
29
4.11
Adjustment of MONITOR Output ........................
30
4.12
Troubleshooting .................................
31
4.13
33
5. ’ OPTIONS
...................................................... 34
5.1 Rack Mount ............................................ 34
Kikusi-7059-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the numbers for four hundred seventy-two.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics