Equipment information

Kikusui Electronics Corporation PAB 32-1.2 A Power supply
Manufacturer
Kikusui Electronics Corporation
Model PAB 32-1.2 A
Date
Category: Measurement instruments
Group Power supply
Description REGULATED DC POWER. SUPPLIES
Information
                                    The PAB-A Regulated DC Power Supply is an automatic
constant-voltage/ constant-current transfer type of cower
supply with an auto-range display meter (3—1/2 digits,
liquid crystal display).
The output voltage and output current can be displayed by
selecting them with the switch on the front panel. An
external voltage also can be displayed with the meter as an
input terminal for such signal is provided on the front
panel (except the PAB250-0.25A and PAB.350-Q.IA which have
no external voltage measuring function).
The control circuit is a monolithic IC based circuit. It
employs a temperature compensation type of reference diode,
metal film resistors of excellent temperature coefficient,
and wire wound potentiometers, thereby realizing stable,
output characteristics.
The output switch is an electronic switch which causes no
chattering or other noise and which can be electronically
remote-controlled.
When the output switch is off, the output voltmeter
indicates the value corresponding to the voltage setting
knob, facilitating the voltage preset operation.
The FINE VOLTAGE setting control can be changed to that for
current setting control by changing the internal connector
setting. The PAB 11O-O,6a, PAB250-0.25A and PAB350-0.1A have
no FINE VOLTAGE setting contrοl.
The operation mode is clearly identified between the CV mode
(constant- voltage mode) and the CC mode (constant-current
mode) with the LEDs on the front panel.
In order to be usable as a system component of an automation
system, the PAB-A Series Power Supply has on its rear panel
the remote-control terminals for control of the output
voltage or output current with an external control voltage
signal. The full-scale adjustment can be accomplished from
the front panel. The remote/local selector switch, which is
convenient for adjustment and maintenance of the power
supply when it is used as a system component of an
automation system, is provided underneath the output
terminals (binding post terminals).

These manuals are available for the above equipment:

Kikusui Electronics Corporation -- PAB 32-1.2 A -- Service and User Manual
File name Kikusi-7054-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 92
Size 2.15 Mbytes (2256271 Bytes)
Language english
Revision
Manual-ID/Number
Date
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 c96106e6fb7cda7cb8a0e02e9288e8bd
Downloads 375 since 14 August 2015
Information
SECTION I. GENERAL ....................................,........
1-1. Description ..........................................
1-2. Specifications .........................................
* Mechanical Outline Drawing ............................
SECTION 2. OPERATION ...........................................
2-1, Precautions Before Use ................................
2-2. Description of Panel Items ............................
2-3. Operating Procedures ............................
2-4. Modification of FINE Setting Potentiometer ............
2-5. Rack Mount .............................................
SECTION 3. APPLICATIONS ................................
........
3-1.. ON/OFF-contro 1 of Output , ............................ .
3-2. Remote Control of Constant-voltage Output .............
1. Control of Output Voltage With External Voltage ....
2. Control of Output Voltage With External Resistance I .
3. Control o£ Output Voltage With External Resistance II..
3-3 Remoto Control of constant-current Operation ...........
1. Control of Output Current With External Voltage .....
2. Control of Output Current With External Resistance I .
3. Control of Output Current With External Resistance Π
3-4. Series or Parallel Operation
.............................56
3-5. One-control Parallel Operation
...........................58
3-6. One-control Series Operation
..............................61
3-7. External Battery Drive of Digital Meter
..................55
SECTION 4. MAINTENANCE
............................................6 7
4-1. Inspection
................................................67
4-2. Adjustment and Heter Calibration
.........................70
* Schematic
Kikusi-7054-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the last letter of the word satellite.
Powered by Commentics