Equipment information

Kenwood TK-863G Transceiver
Manufacturer
Kenwood
Model TK-863G
Date 2002
Category: Radio, Communication
Group Transceiver
Description UHF FM TRANSCEIVER
Information
                                    GENERAL
Frequency Range ................................ 450 to 490MHz
Number of Systems ........................... Maximum 32 systems
Number of Groups .............................. Maximum 250
groups
Channel Spacing ................................. Wide :
25kHz Narrow : 12.5kHz
PLL Channel Stepping ........................ 5, 6.25kHz
Operating Voltage ............................... 13.6V DC ±15%
Current Drain ...................................... Less
than 0.4A on standby
Less than 1.0A on receive
Less than 8.0A on transmit
Operating Temperature Range ........... –30°C to +60°C
(–22°F to +140°F)
Dimensions & Weight ........................ 140 (5-33/64) W
x 40 (1-37/64) H x 145 (5-45/64) D mm (inch), 940g (2.07 lbs)
Channel Frequency Spread ................ 40MHz
RECEIVER (Measurements made per EIA standard EIA/TIA-204-D)
Sensitivity (12dB SINAD) .................... Wide : 0.28μV
Narrow : 0.35μV
Selectivity ........................................... Wide
: 80dB Narrow : 65dB
Intermodulation................................... Wide :
75dB Narrow : 63dB
Spurious Responce ............................. 85dB
Audio Power Output ........................... 4.0W
Frequency Stability ............................. ±2.5ppm
TRANSMITTER (Measurements made per EIA standard EIA-152-C)
RF Power Output ................................ 25W
Spurious and Harmonics..................... 65dB
Modulation .......................................... Wide :
16K0F3E Narrow : 11K0F3E
FM Noise ............................................ Wide :
50dB Narrow : 45dB
Audio Distortion .................................. Less than 3%
Frequency Stability ............................. ±2.5ppm

These manuals are available for the above equipment:

Manual Type Service Manual Kenwood-6892-Manual-Page-1-Picture
Pages 56
Size 3.57 Mbytes (3743971 Bytes)
Language english
Revision
Manual-ID/Number B51-8617-00 (N) 1231
Date January 2002
Quality Electronic document, no scan, very well readable.
Upload date
MD5 a953ce91d6833e06cbb20caa4d096e59
Downloads 516 since 15 June 2015
Information
GENERAL .................................................. 2
SYSTEM SET-UP ...................................... 2
OPERATING FEATURES .......................... 3
REALIGNMENT......................................... 9
INSTALLATION ....................................... 12
CIRCUIT DESCRIPTION .......................... 18
SEMICONDUCTOR DATA ...................... 23
DESCRIPTION OF COMPONENTS ........ 24
PARTS LIST ............................................. 27
EXPLODED VIEW.................................... 34
PACKING ................................................. 35
ADJUSTMENT ........................................ 36
LEVEL DIAGRAM .................................... 45
PC BOARD VIEWS
DISPLAY UNIT (X54-3270-10) ............ 47
PLL/VCO (X58-4670-17) ...................... 48
TX-RX UNIT (X57-6490-10) (A/2) ....... 49
TX-RX UNIT (X57-6490-10) (B/2) ....... 55
SCHEMATIC DIAGRAM.......................... 59
BLOCK DIAGRAM ................................... 63
TERMINAL FUNCTION ........................... 66
SPECIFICATIONS .................................... 67

SCOPE OF THIS MANUAL
This manual is intended for use by experienced technicians
familiar with similar types of commercial grade communications
equipment. It contains all required service information
for the equipment and is current as of the publication
date. Changes which may occur after publication are
covered by either Service Bulletins or Manual Revisions.
These are issued as required.
Kenwood-6892-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics