Hewlett Packard 5372A Analyzer
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Hewlett Packard 5372A ?
If you have any other manuals for the
Hewlett Packard 5372A you can upload the files here .
Model:
5372A
Date:
1990
Category:
Group:
Description:
Frequency and Time Interval Analyzer
Information
The IIP 5372A Frequency and Time Interval Analyzer is a
precision frequency and time interval measuring instrument
that uses a new counting technique called "continuous
measurement". This new counting technique provides
contiguous frequency and time interval measurements with a
wide range of arming and triggering features. Time-sampling
of frequency and time interval measurements up to 13.3 MHz
eliminating measurement "dead time" is attainable. Trigger
events are time-stamped and stored for post-processing by a
68020 microprocessor. A special integrated circuit, called a
Sequencer, controls the arming of three 32-bit count chains,
each operating simultaneously and using two 16-bit
Zero-Dead-Time counters (ZDTs). A new interpolation
technique resolves measurements to 200 ps LSD. High-speed
memory provides built-in statistical analysis capability. A
front-panel CRT display allows presentation of measurement
data and user-friendly Interface.
The HP 5372A has two independent measurement channels, A and
B, and an external arming input (an optional high-frequency
C-Channel is available). Arming can occur on any of the
three standard inputs and can be specified by time, events,
signal edge, cycle, or parity.
In addition to making frequency (and period) and time
interval measurements, the HP 5372A can make the following
measurements:
■ Positive and Negative Pulse Width
■ Rise and Fall Time
■ Totalize
■ Phase
■ Peak Amplitude
■ Duty Cycle
■ Phase Deviation
■ Time Deviation
■ Simultaneous Dual-channel Frequency
The HP 5372A can analyze measurement data to produce
histograms, time variance graphs, event timing graphs, limit
tests, Allan Variance, and more. Additional features include
(1) HP-IB compatibility with enhanced control language, (2)
CRT screen printout capability, (3) diagnostic capability
accessible via the front panel, (4) statistics and math
capability, (5) save and recall of instrument setups, and
(6) graphics capability.
Manual type:
Service Manual
Pages:
598
Size:
20.64 Mbytes (21644614 Bytes)
Language:
english
Revision:
Manual ID:
05372-90016
Date:
Quality:
Scanned document, all readable.
Upload date:
2015 05 31
MD5:
51c1d78f619810193ea4b973494a24aa
Downloads:
1460
Information
Serial Number Prefix: 2952
The HP 5372A Service Manual provides information on testing,
adjusting, troubleshooting, and repairing the HP 5372A
Frequency and Time Interval Analyzer.
1-2. SERVICE MANUAL ORGANIZATION AND CONTENTS
The HP 5372A Service Manual is organized as follows:
CHAPTER 1 — GENERAL INFORMATION - Provides information on
the organization and content of the service manual. This
chapter contains information on many different topics,
including safety considerations and test equipment. Three
retrofit installation procedures are also listed.
CHAPTER 2 — PERFORMANCE TESTS - Provides procedures for
operation verification, complete performance testing, and
HP-IB verification. The verification procedures are used to
give a high degree of confidence that the HP 5372A is
operating properly. The complete performance test is used to
verify that the electrical performance of the HP 5372A is
within specifications, listed in Appendix A.
CHAPTER 3 — ADJUSTMENT PROCEDURES - Provides procedures
required to maintain the instrument operating
characteristics within specifications.
CHAPTER 4 — REPLACEABLE PARTS - Provides ordering
information for all replaceable parts and assemblies within
the instrument.
CHAPTER 5 — OVERALL TROUBLESHOOTING - Provides information
on the HP 5372A service strategy, and using the diagnostic
test failure messages to determine the faulty
assembly/component. This chapter also provides information
on dead-instrument troubleshooting.
CHAPTER 6 — THEORY OF OPERATION - Provides an overall
description of the HP 5372A, This chapter also contains
block diagrams at several functional levels.
CHAPTER 7 — A2 INPUT Amplifier Provides component-level
theory of operation, troubleshooting procedures, block
diagram, component locator, and schematic diagrams for the
A2 assembly.
CHAPTER 8 — A3 TIME Provides component-level theory of
operation, troubleshooting procedures, block diagram,
component locator, and schematic diagrams for the A3 assembly.
CHAPTER 9 — A4 INTERPOLATOR Provides component-level theory
of operation, troubleshooting procedures, block diagram,
component locator, and schematic diagrams for the A4 assembly.
CHAPTER 10 — A5 EVENT Provides component-level theory of
operation, troubleshooting procedures, block diagram,
component locator, and schematic diagrams for the A5 assembly.
CHAPTER 11 — A12 MOTHERBOARD Provides component-level theory
of operation, troubleshooting procedures, block diagram,
component locator, and schematic diagrams for the A12 assembly.
CHAPTER 12 — C-CHANNEL Provides component-level theory of
operation, troubleshooting procedures, block diagram,
component locator, and schematic diagrams for the A20 assembly.
APPENDIX A — SPECIFICATIONS - Provides all specifications of
the HP 5372A, This appendix also lists typical,
non-warranted operating characteristics.
APPENDIX B — FUNCTIONS/ARMING - Provides descriptions of the
various measurement functions and arming modes.
APPENDIX C — DIAGNOSTICS - Provides detailed information on
all built-in diagnostic tests that can be used to verify
various functional subsections of the instrument's circuitry.