Equipment information

Electro Scientific Industries 300 PVB Analog multimeter
Manufacturer
Electro Scientific Industries
Model 300 PVB
Date 1965
Category: Measurement instruments
Group Analog multimeter
Description Potentiometrie Voltmeter Bridge
Information
                                    The ESI Model 300 Potentiometrie Voltmeter Bridge is a
battery-operated multiple-use dc measurement instrument. It
combines in the same case a five- range potentiometric
voltmeter, a three-range precision voltage source, an
eight-range ammeter, a ten-range Kelvin double bridge for
two-, three-, or four-terminal resistance measurements, a
four-terminal resistance comparison bridge, a ratiometer,
and a high-sensitivity electronic null detector.

These manuals are available for the above equipment:

Electro Scientific Industries -- 300 PVB -- Service and User Manual
File name ESI-6665-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 62
Size 8.83 Mbytes (9262777 Bytes)
Language english
Revision revised
Manual-ID/Number
Date September 1965
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 382080ebd3b7507fb3f59afd2430988c
Downloads 141 since 11 May 2015
Information
I INTRODUCTION
1.1 DESCRIPTION 1-1
1.2 SPECIFICATIONS 1-2
1.3 APPLICATIONS 1-3
II OPERATION
2.1 GENERAL 2-1
2.1.1 Controls, Connections and Indications 2-1 2. 1.2
Battery Life and Battery Check 2-3
2.1.3 Null Balancing 2-4
2.1.4 Meter Interpolation 2-5
2.1.5 Kelvin Klips 2-5
2.2 NORMAL OPERATION 2-7
2.2.1 Voltage Measurement 2-7
2.2.2 Standard Voltage Source 2-8
2.2.3 Current Measurement 2-9
2.2.4 Resistance Measurement 2-11
2.2.5 Ratio Measurement 2-12
2.2.6 Comparison Bridge 2-13
2.3 EXTENDED OPERATION 2-16
2.3.1 External Detector 2-16
2.3.2 External Generator 2-16
2.3.3 External Current Shunt 2-17
2.3.4 External Voltage Dropping Resistor 2-19
2.4 AUXILIARY OPERATION 2-21
2.4. 1 Null Detector Auxiliary Operation 2-21
2.4.2 Main Decade Auxiliary Operation 2-21
2.4.3 Internal Resistor Auxiliary Use 2-21
2.5 GENERATOR POWER 2-23
III THEORY
3.1 GENERAL 3-1
3.1.1 The Kelvin Bridge 3-1
3.1.2 The Potentiometrie Voltmeter 3-1
3.2 SCHEMATIC DIAGRAMS 3-2
IV MAINTENANCE
4.1 CHECKOUT AND STANDARD CELL CALIBRATION 4-1
4.1.1 Mechanical Checks 4-2
4.1.2 Battery Load Test 4-2
4.1.3 Null Detector Sensitivity Test 4-2
4.1.4 Stability Test 4-3
4.1.5 Main Decade Linearity Test 4-3
4.1.6 Internal Standard Resistor Test 4-4
4.1.7 Standard Cell Calibration 4-4
4.2 TROUBLESHOOTING 4-5
4.2.1 Troubleshooting Table 4-5
4.2.2 Removing the Instrument Case 4-7
4.3 REPLACEMENT PARTS 4-10
ESI-6665-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
What is the sum of 1 + 2 + 3?
Powered by Commentics