Equipment information

Daetron MC400 Test Set
Manufacturer
Daetron
Model MC400
Date 1989
Category: Measurement instruments
Group Test Set
Description Component Analyser/Capacitance Meter
Information
                                    The Daetron model MC400 is a compact hand held 4 digit LCD
Component Analyser/Capacitance Meter capable of measuring
over the full range of 0.1 pF to 1 FARAD (999.9 mF), In
completely autoranging or manual modes, this instrument
incorporates so many features that the user is well advised
to read and understand this manual thoroughly so as to avoid
any misunderstandings about how the unit works. Complex
procedures Involving certain features could lead an unwary
user to thin* the unit is not working properly.

The basic method of measuring capacitance involves the use
of charging and discharging the capacitor while counting the
time of this cycle, the cycle time is converted to display a
value which Is equivalent to the value of the capacitor
under test, the microprocessor controlling the circuitry
senses when the value of any capacitor is over ranged for
that value and switches to the next higher range resistor.

Component analysing Is carried out by scanning any component
mounted In the top 3 receptacles of the transistor socket
and monitoring the behavior of the voltage outputs that
these components produce. For operating the component
analyser at its optimum level see the section on the AC adaptor.

These manuals are available for the above equipment:

Daetron -- MC400 -- User Manual
File name Daetron-6663-Manual-Page-1-Picture
Manual Type User Manual
Pages 47
Size 33.64 Mbytes (35276969 Bytes)
Language english
Revision
Manual-ID/Number
Date 1989
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 bceac9c71e2b2dbf637c8b861e1bebe7
Downloads 129 since 09 May 2015
Information
SECTION 1 GENERAL INFORMATION

1.1	INTRODUCTION

1.2	INSTALLING THE BATTERY

1.3	PREDICTING BATTERY FAILURE.

1.4	USING THE OPTIONAL AC BATTERY ADAPTOR (DAETRON MODEL PS100)

1.5	ACCESSORIES INCLUDED

1.6	GETTING STARTED

1.7	ENTERING IN INFORMATION ON THE KEYPAD

SECTION 2 GENERAL OPERATION

2.1	MEASURING CAPACITANCE

2.2	USING THE FUNCTION HOLD KEY

2.3	ENTERING A ZERO VALUE FROM THE KEYPAD

2.4	MANUAL RANGE OPERATION

2.5	MEASURING LEAKAGE

2.6	SORTING CAPACITORS
Daetron-6663-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
How many letters are in the word two?
Powered by Commentics