Equipment information

Fluke 5720A Calibrator
Model 5720A
Date 2001
Category: Measurement instruments
Group Calibrator
Description High Performance Multifunction Calibrator
                                    Warm-up time: 2x the time since last warmed up,
to a maximum of 30 minutes
System installation: Rear output configuration and
rack-mount kit available
Standard interfaces: IEEE-488, RS-232, 5725A,
5205A or 5215A, 5220A, phase lock in (BNC), phase
reference out (BNC)
Temperature performance:
Operating: 0°C to 50°C
Calibration: 15°C to 35°C
Storage: -40°C to 75°C
Relative humidity:
Operating: <80% to 30°C, <70% to 40°C, <40% to 50°C
Storage: <95%, non-condensing. A power-on stabilization
period of four days may be required after extended
storage at high temperature and humidity.
Safety: Designed to comply with UL311; IEC 348-
1978; IEC 66E (CO) 4; CSA 556B
Guard isolation: 20 volts
EMI/RFI: Designed to comply with FCC Rules Part 15,
Subpart J, Class B; VDE 0871, Class B
Electro static discharge: This instrument meets
criteria C for ESD requirements per EN61326
Line power: 47 to 63 Hz; ±10% allowed about selectable
nominal line voltage: 100V, 110V, 115V, 120V, 200V,
220V, 230V, 240V
Maximum power: 5700A/5720A: 300VA; 5725A, 750VA
5700A/5720A: Height 17.8 cm, (7 in), standard rack
increment, plus 1.5 cm (0.6 in) for feet; width 43.2 cm
(17 in), standard rack width; depth 63.0 cm (24.8 in),
overall; 57.8 cm (22.7 in), rack depth
5725A: Height 13.3 cm, (5.25 in); width and depth
same as 5700A/5720A
Both units project 5.1 cm, (2 in) from rack front
5700A/5720A: 27kg (62 lbs)
5725A: 32 kg (70 lbs)

These manuals are available for the above equipment:

Manual Type Datasheet Fluke-6513-Manual-Page-1-Picture
Pages 24
Size 204.12 Kbytes (209014 Bytes)
Language english
Revision C
Manual-ID/Number 1268275
Date November 2001
Quality Electronic document, no scan, very well readable.
Upload date
MD5 e7b9e869556bd9423dde5a7a90bf8f9d
Downloads 261 since 29 November 2014

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics