Equipment information

Fluke 8062A Digital multimeter
Manufacturer
Fluke
Model 8062A
Date 1982
Category: Measurement instruments
Group Digital multimeter
Description True-rms Multimeter
Information
                                    Your Fluke Model 8062A is a handheld, microcomputer-based
4-1/2 digit
multimeter that is ideally suited for use in the field,
laboratory, shop or
home. The 8062A has all the features that have become
accepted standards
for quality handheld multimeters, as well as some new
features that have not
been offered before in a handheld multimeter. New features
include the
following:
· True rms measurements for ac signals up to 30 kHz.
· Resistance measurements up to 300 MW.
· Ability to store any input signal as an offset or relative
reference value.
Other features include:
· FUNCTIONS:
Standard DMM measurement functions, such as ac and dc volts
and ac
and dc current, as well as resistance, continuity, and diode
test.
· RANGES:
Leading zero suppression.
Automatic polarity.
Overrange indication.
Protection from overloads and transients up to 1500V peak.
Dual-slope integration a/d conversion to ensure noise-free
measurements.
Autoranging MW resistance range (to 300 MW), as well as four
fixed
resistance ranges from 200W to 200 kW.
· OPERATOR CONVENIENCE:
4-1/2 digit Liquid Crystal Display.
Software-control self-test routines for quick verification
of internal
circuitry and operation.
· POWER:
170 hours of continuous operation can be expected from a 9V
alkaline
battery (NEDA 1604).

These manuals are available for the above equipment:

Fluke -- 8062A -- Service and User Manual
File name Fluke-6498-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 124
Size 5.90 Mbytes (6183812 Bytes)
Language english
Revision 1
Manual-ID/Number PN 609153
Date January 2000
Quality Electronic document, no scan, very well readable.
Upload date
MD5 123949df8aa2ef1ba8f4b27d8afbee09
Downloads 148 since 29 November 2014
Information
This manual pertains to instruments with serial number
6830XXX or higher.

1 Introduction and
Specifications............................................ 1-1
1-1. Introduction
.............................................................................
1-3
1-2.
Specifications...........................................................................
1-4
2 Operation
Instructions...........................................................
2-1
2-1. Introduction
.............................................................................
2-3
2-2. Unpacking Your
Instrument.....................................................
2-3
2-3. Battery Installation or Replacement
......................................... 2-3
2-4. Fuse Replacement
....................................................................
2-5
2-5. Physical Features
.....................................................................
2-6
2-6. Front
Panel...........................................................................
2-6
2-7.
Display.................................................................................
2-8
2-8. Signal Input Limits
..................................................................
2-9
2-9. Operation
.................................................................................
2-10
2-10. Power-On
Self-Test..............................................................
2-10
2-11. AC/DC Voltage (V)
............................................................. 2-11
2-12. True RMS Measurement
.................................................. 2-11
2-13. AC-Coupled AC
Measurements....................................... 2-12
2-14. Waveform Comparison and Conversion
.......................... 2-13
2-15. High Impedance DC Voltage
........................................... 2-14
2-16. AC/DC Current
(A)..............................................................
2-15
2-17. Resistance
(W)......................................................................
2-18
2-18. Autoranging
Megohms.....................................................
2-19
2-19. Autoranging
Kilohms.......................................................
2-20
2-20. Diode Test
(G)...................................................................
2-21
2-21. Relative (REL)
.....................................................................
2-22
2-22. Continuity ( )
........................................................... 2-25
2-23. Initial Check-Out Procedure
.................................................... 2-25
3 Theory of Operation
...............................................................
3-1
3-1. Introduction
.............................................................................
3-3
3-2. Functional
Description.............................................................
3-3
3-3.
Microcomputer.....................................................................
3-3
3-4. Measurement Acquisition Chip (MAC)
............................... 3-5
3-5. A/D Converter
Cycle............................................................
3-5
3-7. Current Measurement
.......................................................... 3-9
3-8. Resistance
Measurement......................................................
3-10
3-9. Continuity Measurement
..................................................... 3-11
4
Maintenance............................................................................
4-1
4-1. Introduction
.............................................................................
4-3
4-2. Service Information
.................................................................
4-3
4-3. General Information
................................................................
4-5
4-4. Handling Precautions for Using Static Sensitive Devices
... 4-5
4-5. Disassembly and Reassembly
.............................................. 4-5
4-6. Calibration and Backup Fuse
Access............................... 4-6
4-7. Main PCB
Access............................................................
4-7
4-8. LCD and Microcomputer PCB Disassembly and
Assembly
.........................................................................
4-8
4-9. Backup Fuse
Replacement...................................................
4-11
4-10.
Cleaning...............................................................................
4-11
4-11. Performance Tests
...................................................................
4-12
4-12. Initial Procedure
..................................................................
4-12
4-13. Microcomputer and Display
Test......................................... 4-12
4-14. Voltage
Test.........................................................................
4-13
4-15. Resistance Test
....................................................................
4-14
4-16. Continuity Test
....................................................................
4-15
4-17. Current Test
.........................................................................
4-15
4-18. Diode Test
...........................................................................
4-17
4-19. Calibration Adjustments
.......................................................... 4-17
4-20.
Troubleshooting.......................................................................
4-19
4-21.
Self-Tests.............................................................................
4-19
4-22. Ratio Self-Test
.................................................................
4-19
4-23. Switch Decoding Self-Test
.............................................. 4-20
4-24. Troubleshooting Guide
........................................................ 4-21
5 List of Replaceable
Parts....................................................... 5-1
5-1. Introduction
.............................................................................
5-3
5-2. How to Obtain Parts
................................................................
5-3
5-3. Manual Status Information
...................................................... 5-4
5-4. Newer
Instruments...................................................................
5-4
5-5. Service
Centers........................................................................
5-4
6 Accessory Information
.......................................................... 6-1
6-1. Introduction
.............................................................................
6-3
6-2. Deluxe Carrying Case
(C90).................................................... 6-3
6-3. Temperature Probes (80T-150C and 80T-150F)
..................... 6-3
6-4. Current Transformer
(80I-600)................................................ 6-6
6-5. High Voltage Probe (80K-6)
................................................... 6-6
6-6. High Voltage Probe (80K-40)
................................................. 6-7
6-7. High Frequency Probe (83RF)
................................................ 6-7
6-8. High Frequency Probe (85RF)
................................................ 6-8
6-9. Current Shunt
(80J-10)............................................................
6-9
6-10. AC/DC Current Probe
(Y8100)............................................... 6-9
6-11. AC Current Transformer
(Y8101)............................................ 6-10
6-12. Safety Designed Test Lead Set (TL70)
.................................... 6-11
6-13. Deluxe Test Lead Set
(Y8134)................................................. 6-11
6-14. Slim Flex Test Lead Set
(Y8140)............................................. 6-12
6-15. Cables and Adapters
................................................................
6-12
7 Schematic
Diagrams..............................................................
7-1


Fluke-6498-Manual-Page-1-Picture
Start Free Download


Fluke -- 8062A -- Service and User Manual
File name Fluke-7620-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 96
Size 5.75 Mbytes (6031244 Bytes)
Language english
Revision 3
Manual-ID/Number 632695
Date January 1997
Quality Scanned document, all readable.
Upload date
MD5 3f399ef121674fe122ee7905cd4d8d06
Downloads 52 since 27 January 2016
Information
1 INTRODUCTION AND SPECIFICATIONS ..........................1-1
l-l.
INTRODUCTION.......................................................1-1
1-2.
SPECIFICATIONS.....................................................1-2
2 OPERATING INSTRUCTIONS
............................................2-1
2-1.
INTRODUCTION.......................................................2-1
2-2. UNPACKING YOUR INSTRUMENT..........................2-1
2-3. BATTERY INSTALLATION OR REPLACEMENT .. 2-1
2-4. FUSE REPLACEMENT
.............................................2-3
2-5. PHYSICAL
FEATURES.............................................2-3
2-6. Front
Panel.............................................................2-3
2-7.
Display...................................................................2-6
2-8. SIGNAL INPUT LIMITS
............................................2-6
2-9.
OPERATION.............................................................2-7
2-10. Power-On Self Test
..................................................2-7
2-11. AC/DC VOLTAGE (V)
............................................2-8
2-16. AC/DC Current (A)
................................................2-12
2-17. Resistance
(il).........................................................2-14
2-20. Diode
Test.............................................................2-16
2-21. Relative (REL)
.......................................................2-17
2-22. Continuity ( -n-»»I )
...............................................2-19
2-23. INITIAL CHECK-OUT PROCEDURE ........................2-20
3 THEORY OF OPERATION
.................................................3-1
3-1.
INTRODUCTION......................................................3-1
3-2. FUNCTIONAL DESCRIPTION .................................3-1
3-3.
Microcomputer.......................................................3-1
3-4. Measurement Acquisition Chip (MAC)
......................3-3
3-5. A/D Conversion Cycle
............................................3-3
3-6. Voltage Measurement
..............................................3-5
3-7. Current Measurement
..............................................3-6
3-8. Resistance
Measurement...........................................3-7
3-10. Continuity Measurement
.........................................3-7
i (continued on page ii)
4
MAINTENANCE.............................................................................................4-1
4-1.
INTRODUCTION...............................................................................4-1
4-2. SERVICE
INFORMATION...............................................................4-2
4-3 GENERAL
INFORMATION............................................................4-2
4-4. Handling Precautions for Using Static Sensitive
Devices...............4-2
4-5. Disassembly and
Reassembly.............................................................4-3
4-9. Backup Fuse
Replacement..................................................................4-8
4-10.
Cleaning................................................................................................4-8
4-11. PERFORMANCE
TESTS..................................................................4-9
4-12. Initial
Procedure....................................................................................4-9
4-13. Microcomputer and Display
Test......................................................4-9
4-14. Voltage
Test..........................................................................................4-9
4-15. Resistance
Test......................................................................................4-9
4-16. Continuity
Test.....................................................................................4-10
4-17. Current
Test...........................................................................................4-12
4-18. Diode
Test.............................................................................................4-12
4-19. CALIBRATION
ADJUSTMENTS...................................................4-12
4-20.
TROUBLESHOOTING......................................................................4-14
4-21.
Self-Tests...............................................................................................4-15
4-24. Troubleshooting
Guide.......................................................................4-16
5 LIST OF REPLACEABLE
PARTS..........................................................5-1
5-1.
INTRODUCTION..............................................................................5-1
5-2. HOW TO OBTAIN
PARTS...............................................................5-2
5-3. MANUAL STATUS
INFORMATION.............................................5-2
5-4. NEWER
INSTRUMENTS.................................................................5-2
5-5. SERVICE
CENTERS.........................................................................5-2
6 ACCESSORY
INFORMATION..................................................................6-1
6-1.
INTRODUCTION..............................................................................6-1
6-2. DELUXE CARRYING CASE
(C90)................................................6-1
6-3. TEMPERATURE PROBES (80T-150C and
80T-I50)...................6-1
6-4. CURRENT TRANSFORMER
(801-600)..........................................6-4
6-5. HIGH VOLTAGE PROBE
(80K-6)...................................................6-4
6-4. HIGH VOLTAGE PROBE
(80K-40)................................................6-4
6-7 HIGH FREQUENCY PROBE
(83RF)..............................................6-5
6-8 HIGH FREQUENCY PROBE
(85RF)..............................................6-5
6-9. BATTERY ELIMINATOR
(A81)......................................................6-6
6-10. CURRENT SHUNT
(80J-10)............................................................6-6
6-11. AC/DC CURRENT PROBE
(Y8100)..............................................6-7
6-12. AC CURRENT TRANSFORMER
(Y8101)....................................6-8
6-13. SAFETY DESIGNED TEST LEAD SET
(Y8132).......................6-8
6-14. DELUXE TEST LEAD SET
(Y8134)...............................................6-8
6-15. SLIM FLEX TEST LEAD SET
(Y8140)..........................................6-8
6-16. CABLES AND
ADAPTERS.............................................................6-9
7 SCHEMATIC
DIAGRAMS..........................................................................7-1
Fluke-7620-Manual-Page-1-Picture
Start Free Download


Fluke -- 8062A -- Service and User Manual
File name Fluke-9274-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 100
Size 3.60 Mbytes (3776961 Bytes)
Language english
Revision
Manual-ID/Number P/N 632695
Date 01 March 1982
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 7041d10e91f921d365d9a94d76964009
Downloads 12 since 10 August 2017
Information
Instruction Manual

INTRODUCTION AND SPECIFICATIONS ...................1-1

1-1.	INTRODUCTION........................................M

1-2.	SPECIFICATIONS.,...................................1-2

2	OPERATING INSTRUCTIONS
...................................................2-1

2-1.	INTRODUCTION..................................2-1

2-2.	UNPACKING YOUR INSTRUMENT.....................2-1

2-3.	BATTERY INSTALLATION OR REPLACEMENT ..	2-1

2-4.	FUSE REPLACEMENT
......................................................2-3

2-5.	PHYSICAL FEATURES
......................................................2-3

2-6. Front
Panel..................................................................2-3

2-7.	Display...............................................2-6

2-8.	SIGNAL INPUT LIMITS ............................2-6

2-9.	OPERATION .........................................2-7

2-10.	Power-On Self Test
.....................................2-7

2-11.	AC/DC VOLTAGE (V) .............................2-8

2-16.	AC/DC Current (A) ..................................2-12

2-17. Resistance (O).....................................2-14

2-20.	Diode
Test..............................................2-16

2-21.	Relative (REL)
............................................2-17

2-22.	Continuity (-*♦■>!! ) ................................2-19

2-23.	INITIAL CHECK-OUT PROCEDURE ...................2-20

3	THEORY OF OPERATION ................................3-1

3-1.	INTRODUCTION..........................................3-1

3-2.	FUNCTIONAL DESCRIPTION .........................3-1

3-3.	Microcomputer.......................................3-1

3-4.	Measurement Acquisition Chip (MAC) ................3-3

3-5.	A/D Conversion Cycle
......................................................3-3

3-6.	Voltage Measurement
........................................................3-5

3-7.	Current Measurement
........................................................3-6

3-8.	Resistance Measurement
....................................................3-7

3-10.	Continuity Measurement ..........................3-7
	MAINTENANCE .............................................4-1

4-1. INTRODUCTION
................................................................4-1

4-2. SERVICE INFORMATION
................................................4-1

4-3. GENERAL INFORMATION
..............................................4-2

4-4.	Handling Precautions for Using Static Sensitive Devices	4-2

4-5. Disassembly and
Reassembly............................................4-3

4-9. Backup Fuse Replacement .........................4-8

4-10.
Cleaning................................................................................4-8

4-11. PERFORMANCE
TESTS.............................................4-9

4-12. Initial Procedure
................................................................4-9

4-13. Microcomputer and Display Test
....................................4-9

4-14. Voltage Test .........................................4-9

4-15. Resistance Test
..........................................................4-9

4-16. Continuity
Test....................................................................4-10

4-17, Current Test
........................................................................4-12

4-18. Diode
Test............................................................................4-12

4-19. CALIBRATION ADJUSTMENTS
....................................4-12

4-20. TROUBLESHOOTING
.................................................4-14

4-21. Self-Tests
..............................................................................4-14

4-24.	Troubleshooting Guide
......................................................4-15

5	LIST OF REPLACEABLE PARTS
................................................5-1

5-1.
INTRODUCTION.........................................................5-1

5-2. HOW TO OBTAIN PARTS
................................................5-1

5-3.	MANUAL CHANGE AND BACKDATING
INFORMATION.....................................................5-2

6	ACCESSORY
INFORMATION.................................................6-1

6-1.	INTRODUCTION........................................6-1

6-2. DELUXE CARRYING CASE
(C90)..................................6-I

6-3.	TEMPERATURE PROBES (80T-150C and 80T-150F) .	6-1

6-4. CURRENT TRANSFORMER (801-600) ..........................6-4

6-5. HIGH VOLTAGE PROBE (80K-6)
....................................6-4

6-6. HIGH VOLTAGE PROBE (80K-40).........................6-4

6-7. HIGH FREQUENCY PROBE (83RF)
..............................6-5

6-8. HIGH FREQUENCY PROBE (85RF)
..............................6-5

6-9. BATTERY ELIMINATOR (A81)
......................................6-6

6-10. CURRENT SHUNT (80J-10) .............................6-6

6-11. AC/DC CURRENT PROBE (Y8100)
................................6-7

6-12. AC CURRENT TRANSFORMER (Y8101)......................6-8

6-13. SAFETY DESIGNED TEST LEAD SET (Y8132)..........6-8

6-14. DELUXE TEST LEAD SET (Y8134)
................................6-8

6-15. SLIM FLEX TEST LEAD SET (Y8140)
..........................6-8

6-16. CABLES AND ADAPTERS
..............................................6-9

7	SCHEMATIC DIAGRAMS
..............................................................7-1
Fluke-9274-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
How many letters are in the word two?
Powered by Commentics