Equipment information

Tektronix TG501 Generator
Manufacturer
Tektronix
Model TG501
Date 1984
Category: Measurement instruments
Group Generator
Description TIME MARK GENERATOR
Information
                                    Description
The TG 501 is a general purpose Time Mark Generator plug-in
designed to operate in a TM 500 Series Power Module. A
Variable Timing Readout provides a simple but accurate means
of measuring timing errors over ±7.5% minimum range. Since
many specifications are given in percentages, the error
readout eliminates the need for computations and,
additionally, lessens parallax discrepancies.
waves are selected by self-canceling push-buttons when the
rotary switch is in the 521 n position.
All outputs are available at the front-panel connectors, or
by modification at the interface connector, located at the
back of the plug-in, and the TM 500 Series Power Module.
Marker selection from 5 s through 1 ns in a 1, 2, 5,
sequence is available. 5 s through 10 ns markers are
selected by a rotary switch. 5, 2, and 2 ns modified sine
Power supplies are current limited. The 5 V supply is
over-voltage protected to avoid damage to the integrated
circuits.

These manuals are available for the above equipment:

Tektronix -- TG501 -- Service and User Manual
File name Tektronix-6483-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 86
Size 29.64 Mbytes (31083730 Bytes)
Language english
Revision
Manual-ID/Number 070-1576-02
Date February 1984
Quality Scanned document, all readable.
Upload date
MD5 e9286ce3c0a2624430b46c6aab6566b7
Downloads 115 since 28 November 2014
Information
LIST OF ILLUSTRATIONS ii
Section 1
Specification.......................................................................................................
1-1
Section 2 Operating Instructions
......................................................................................
2-1
JßfARNIN^J
THE FOLLOWING SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED
PERSONNEL ONLY. TO AVOID PERSONAL INJURY, DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
Section 3 Theory of
Operation...........................................................................................
3-1
Section 4 Calibration
Procedure........................................................................................
4-1
Performance
Check......................................................................................
4-1
Adjustment Procedure
.................................................................................
4-5
Section 5
Maintenance..........................................................................................................5-1
Section 6
Options...................................................................................................................6-1
Section 7 Replaceable Electrical Parts
...............................................................................7-1
Section 8 Diagrams and
Illustrations....................................................................................8-1
Section 9 Replaceable Mechanical
Parts.............................................................................9-1
Tektronix-6483-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the fifth word of this sentence.
Powered by Commentics