Equipment information:

Tektronix TR502 Generator
Manufacturer:
Tektronix
Model: TR502
Date: 1975
Category: Measurement instruments
Group: Generator
Description: Tracking Generator Plugin
Information:
                                    
The TR 502 Tracking Generator operates with the 7L13 or 7L12
Spectrum Analyzer to provide a calibrated rf signal for
swept frequency applications from 100 kHz to 1.8 GHz. The
output frequency of the TR 502 can be adjusted to track the
spectrum analyzer frequency within 10 Hz. The TR 502, a
two-wide unit compatible with the TM 500 Modular Series
instruments, is normally used with the TM 503 (Option 07)
Power Module. This permits the optional use of a digital
counter such as the DC 508A with Option 07. A bright dot, on
the spectrum display, identifies the frequency location on
the sweep that is indicated by the counter. Higher range
counters to 1.8 GHz can be used by connecting their input to
the TR 502 AUX RF OUT connector.

These manuals are available for the above equipment:

Tektronix -- TR502 -- Datasheet
File name: Tektronix-6465-Manual-Page-1-Picture
Manual Type: Datasheet
Pages: 1
Size: 135.75 Kbytes (139006 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date:
Quality: Scanned document, all readable.
Upload date:
MD5: 8694e5d4e67d8fdeeaa073139cd6c6c5
ed2kID: 3c200186d45b53296a16f916d062cc9f
Downloads: 76 since 24 November 2014
Information:
Tektronix-6465-Manual-Page-1-Picture
Start Free Download


Tektronix -- TR502 -- Service and User Manual
File name: Tektronix-6488-Manual-Page-1-Picture
Manual Type: Service and User Manual
Pages: 58
Size: 21.66 Mbytes (22710618 Bytes)
Language: english
Revision: revised
Manual-ID/Number: 070-1735-00
Date: August 1984
Quality: Scanned document, all readable.
Upload date:
MD5: 12266d84bcc73e154536a184f43097b6
ed2kID: 0ecf6c74c0ad977c89828e623b7d8840
Downloads: 72 since 29 November 2014
Information:
Introduction
The abbreviations, graphic symbols, and logic sym- bology
used in the text and diagrams of this manual are in accord
and based on ANSI Y1.1-1972, ANSI Y32.2-1970, and ANSI
Y32.14-1973 (American National Standard Institute, 345 East
47 Street; New York, N.Y. 10017).
Change information has been integrated into the manual by
goldenrod insert pages at the back of the manual and page
revision. Original pages are identified by the symbol @ and
revised pages are identified by a revision date in the lower
inside corner of the page. If the serial number of your
instrument is lower than the one on the title page, the
manual contains revisions that may not apply to your
instrument. History or backlog information all previously
applicable to produced products with the updated data is
integrated when the page or diagram is revised. The
following describes the sections and information provided in
this manual.
Section 1—General Information and Specifications: Contains
instrument description, electrical specifications,
environmental characteristics, accessories, installation,
and repackaging for shipment instructions.
Section 2—Operating Instructions: Information relative to
operating and checking the instrument operation.
Section 3—Performance Check: Procedure to check the
operational performance and electrical specifications of the
instrument. Two-part section provides an incoming inspection
type check and a detailed electrical performance verification.
Section 4—Calibration Procedure: Describes test equipment
setup and adjustment procedures required to calibrate the
instrument.
Section 5—Circuit Description: Provides basic and general
circuit analysis that may be useful when servicing or
operating the instrument.
Section 6—Maintenance Instructions: Describes routine and
corrective maintenance procedures with detailed instructions
for replacing assemblies, sub- assemblies, and individual
components. An exploded drawing is part of Section 10.
Section 7—Options and Modifications: Provides data on
production options available.
Section 8—Electrical Parts List: Provides information
necessary to order replaceable parts and assemblies related
to the electrical functions of the instrument.
Section 9—Diagrams: Provides functional block diagram and
detailed circuit schematics. Located adjacent to the diagram
(usually on the back of the preceding diagram) are pictorial
layout drawings which show sub- assembly and component
locations. Voltage and signal level information, if
applicable, is included to aid in troubleshooting.
Section 10—Mechanical Parts List, Exploded Drawings and
Accessories: Provides information necessary to order
replaceable mechanical parts. The Parts List is cross-
referenced to the Electrical Parts List when appropriate.
Exploded drawing shows sequence of assembly and identifies
assemblies.
Changes and Corrections: Provides updating information for
the manual in the form of inserts. These inserts are
incorporated into the manual text and diagrams when the
manual is updated.
Tektronix-6488-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the sum of 1 + 2 + 3?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics