Equipment information:

Wavetek 9100 Other
Manufacturer:
Wavetek
Model: 9100
Date: 1994
Category: Measurement instruments
Group: Other
Description: Universal Calibration System
Information:
                                    The Model 9100 is a state-of-the-art calibrator offering
multimeter test capabilities, providing wide functionality
from a single
source. It can calibrate:
• DC Voltage:
............................................... 0V to ±1050V
• AC Voltage:
............................................... 0V to 1050V
10Hz to 100kHz
Waveshapes: Sinusoidal, Square, Impulse, Triangular and
Trapezoidal
• DC Current:
................................................ 0A to ±20A
(1000A with Option 200)
• AC Current:
................................................ 0A to 20A
10Hz to 30kHz (1000A with Option 200)
Waveshapes: Sinusoidal, Square, Impulse, Triangular and
Trapezoidal
• Resistance:
.................................................. 0W to 400MW
• Frequency (1:1 Square Wave): ................... 0.5Hz to
10MHz
Voltage Levels (LF): -32V to +32V (HF): -6.5V to +6.5V
• Phase:
.........................................................
±180° on ACV and ACI functions
• Mark/Period Ratio: .....................................
2.5 x 10-8 : 1 to 0.999995 : 1
Pulse widths: 0.05ms to 1999.99ms Repetition Intervals:
0.1ms to 2000.00ms
Voltage Levels (LF): -32V to +32V (HF): -6.5V to +6.5V
• Per Cent Duty Cycle: .................................
00.05% to 99.95% (2 decimal places)
Repetition Intervals: 0.1ms to 2000.00ms
Voltage Levels (LF): -32V to +32V (HF): -6.5V to +6.5V
• Capacitance:
............................................... 500pF to 40mF
• Conductance:
.............................................. 2.5nS to 2.5mS
• Thermocouple Simulation: ......................... Types:
B, C, E, K, L, J, N, R, S and T. Temp. Scales: IPTS-68 & ITS-90.
Range depends on thermocouple type: Refer to Section 4,
Paras 4.14.
• RTD Temperature Simulation: ................... 'PT385'
(Euro) curve: -200°C to +850°C; or 'PT392' (USA) curve:
-200°C to +630°C
Temp. Scales: IPTS-68 & ITS-90.
• Logic Stimulus: ..........................................
Pulsed Logic: TTL, CMOS, ECL
Pulse widths: 0.05ms to 1999.99ms Repetition Intervals:
0.1ms to 2000.00ms
• Logic Stimulus: ..........................................
DC Levels: TTL, CMOS, ECL

These manuals are available for the above equipment:

Wavetek -- 9100 -- User Manual
File name: Wavetek-6364-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 86
Size: 277.15 Kbytes (283803 Bytes)
Language: english
Revision: Issue 3
Manual-ID/Number: 850299
Date: August 1995
Quality: Scanned document, all readable.
Upload date:
MD5: b499585b5357e108c37422498b065235
ed2kID: 8fe683d4af678c23f13a88a21be48679
Downloads: 41 since 09 November 2014
Information:
OPERATOR'S GUIDE

(for operating, performance and maintenance details
refer to the User's Handbook)

Section 1 Introduction
Section 2 Interconnections
Section 3 DC Voltage
Section 4 AC Voltage
Section 5 DC Current
Section 6 AC Current
Section 7 Resistance
Section 8 Conductance
Section 9 Frequency
Section 10 Mark/Period
Section 11 % Duty
Section 12 Auxiliary Functions
Section 13 Capacitance
Section 14 Temperature — Thermocouple
Section 15 Temperature — RTD
Section 16 Logic Pulses
Section 17 Logic Levels
Section 18 Error Messages
Wavetek-6364-Manual-Page-1-Picture
Start Free Download


Wavetek -- 9100 -- Service Manual
File name: Wavetek-6368-Manual-Page-1-Picture
Manual Type: Service Manual
Pages: 387
Size: 1.88 Mbytes (1972038 Bytes)
Language: english
Revision: Issue 8.0
Manual-ID/Number: 850300
Date: June 1998
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 798bc61908d8764b0c7328204306192c
ed2kID: 2d10536c37c6cfd6c537fd2d923e624d
Downloads: 47 since 09 November 2014
Information:
User's Handbook
Volume 1 — Operation

(for Remote Operation, Instrument Specification,
Specification Verification, Routine Maintenance and Calibration
refer to Volume 2 — Performance)

Contents
Volume 1 — Operation (This Volume)
Section 1 The Model 9100 Multifunction Calibrator
1.1 About Section 1
.............................................................................................................
1-1
1.2 Introduction to the Model 9100
......................................................................................
1-2
1.3 Model 9100 Options and Associated Products
............................................................. 1-6
1.4 UUT Calibration Procedure Library
...............................................................................
1-7
1.5 Printer Support
..............................................................................................................
1-8
1.6 UUT Calibration Certificates
..........................................................................................
1-8
1.7 Inventory Manaagement
................................................................................................
1-8
1.8 Documentation
..............................................................................................................
1-8
Section 2 Installing the Model 9100
2.1 About Section 2
.............................................................................................................
2-1
2.2 Lifting and Carrying the Model 9100
.............................................................................
2-2
2.3 Unpacking and Inspection
.............................................................................................
2-2
2.4 Storage
..........................................................................................................................
2-3
2.5 Preparation for Shipment
..............................................................................................
2-3
2.6 Calibration Enable Switch
.............................................................................................
2-3
2.7 Preparation for Operation
..............................................................................................
2-4
2.8 Connectors and Pin Designations
.................................................................................
2-10
Section 3 Model 9100 Controls
3.1 About Section 3
.............................................................................................................
3-1
3.2 Introduction to the Front Panel
......................................................................................
3-2
3.3 Modes of Operation
.......................................................................................................
3-4
3.3.1 Mode Selection
...................................................................................................
3-4
3.3.2 Configuration Mode
.............................................................................................
3-6
3.4 Working with Front Panel Controls — Tutorials
............................................................
3-32
Section 4 Using the Model 9100 — Manual Mode
4.1 About Section 4
.............................................................................................................
4.1-1
4.2 Interconnections
............................................................................................................
4.2-1
Functions:
4.3 DC Voltage
....................................................................................................................
4.3-1
4.4 AC Voltage
....................................................................................................................
4.4-1
4.5 DC Current
....................................................................................................................
4.5-1
4.6 AC Current
....................................................................................................................
4.6-1
4.7 Resistance
.....................................................................................................................
4.7-1
4.8 Conductance
.................................................................................................................
4.8-1
4.9 Frequency
.....................................................................................................................
4.9-1
4.10 Mark/Period
...................................................................................................................
4.10-1
4.11 % Duty
...........................................................................................................................
4.11-1
4.12 Auxiliary Functions
........................................................................................................
4.12-1
4.13 Capacitance
..................................................................................................................
4.13-1
4.14 Thermocouple Temperature
..........................................................................................
4.14-1
4.15 RTD Temperature
.........................................................................................................
4.15-1
4.16 Logic-Pulses
..................................................................................................................
4.16-1
4.17 Logic-Levels
..................................................................................................................
4.17-1
4.18 Insulation/Continuity
......................................................................................................
4.18-1
4.19 DC Power
......................................................................................................................
4.19-1
4.20 AC Power
......................................................................................................................
4.20-1
4.21 AC Harmonics
...............................................................................................................
4.21-1
Section 5 Using the Model 9100 — Procedure Mode
5.1 About Section 5
.............................................................................................................
5.1-1
5.2 Procedure Mode — Safety and General Notes
............................................................. 5.2-1
5.3 Procedure Mode — Access Guide
................................................................................
5.3-1
5.4 Procedure Mode — 'Adjustment Only' Procedure
......................................................... 5.4-1
5.5 Procedure Mode — '1 Year Verification' & 'ISO9000
Verify' Procedures ...................... 5.5-1
5.6 Procedure Mode — 'Verify Pass/Fail' & 'ISO9000
Pass/Fail' Procedures ..................... 5.6-1
Wavetek-6368-Manual-Page-1-Picture
Start Free Download


Wavetek -- 9100 -- User Manual
File name: Wavetek-6369-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 275
Size: 897.26 Kbytes (918795 Bytes)
Language: english
Revision: Issue 8.0
Manual-ID/Number: 850301
Date: June 1998
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 694aa36ec0682dd8a3d32e6b40e1925b
ed2kID: 9aa0c6491387f5b78ef2d91e5528054a
Downloads: 41 since 09 November 2014
Information:
User's Handbook
Volume 2 — Performance

(for Introduction, Installation, Controls (with Tutorial),
Manual Mode and Procedure Mode
refer to Volume 1 — Operation)
(for Options 250 and 600 refer to Volume 3 — Operation and
Performance)

Volume 2 — Performance (This Volume)
Section 6 Remote Interfaces
6.1 About Section 6
................................................................................................
6-1
6.2 Index of IEEE-488.2 and SCPI Codes used in the Model
9100 ....................... 6-2
6.3 Introduction
.......................................................................................................
6-4
6.4 Using the Model 9100 in a System
...................................................................
6-8
6.5 Retrieval of Device Status Information
............................................................. 6-15
6.6 Model 9100 SCPI Language - Commands and Syntax
.................................... 6-24
6.7 The IEEE Bus Interface for the Power Option
.................................................. 6-58
Section 6 Appendix A: IEEE 488.2 Device Documentation
Requirements ............... 6-A1
Section 6 Appendix B: SCPI Conformance Information
........................................... 6-B1
Section 6 Appendix C: IEEE 488.2 Common Commands and Queries
Implemented in the Model 9100
........................................... 6-C1
Section 6 Appendix D: Model 9100 — Device Settings after
*RST .......................... 6-D1
Section 6 Appendix E: Model 9100 — Device Settings at Power
On ....................... 6-E1
Section 7 Model 9100 Specifications
7.1 General
.............................................................................................................
7-1
7.2 Options and Associated Products
....................................................................
7-2
7.3 DC Voltage Specifications
................................................................................
7-3
7.4 AC Voltage Specifications
................................................................................
7-4
7.5 DC Current Specifications
................................................................................
7-8
7.6 AC Current Specifications
................................................................................
7-9
7.7 Resistance Specifications
................................................................................
7-14
7.8 Conductance Specifications
.............................................................................
7-15
7.9 Frequency Function Specifications
..................................................................
7-16
7.10 Mark/Period Function Specifications
................................................................
7-17
7.11 % Duty Cycle Function Specifications
..............................................................
7-18
7.12 Auxiliary Functions - Specifications
..................................................................
7-19
7-13 Capacitance Specifications
..............................................................................
7-20
7.14 Thermocouple Temperature Specifications
...................................................... 7-21
7.15 RTD Temperature Specifications
.....................................................................
7-22
7.16 Logic-Pulses Function Specifications
...............................................................
7-23
7.17 Logic-Levels Function Specifications
...............................................................
7-24
7.18 Insulation/Continuity Specifications
..................................................................
7-25
7.19 Power Specifications
........................................................................................
7.27
Section 8 Model 9100 — Routine Maintenance and Test
8.1 About Section 8
................................................................................................
8-1
8.2 Routine Maintenance
.......................................................................................
8-2
8.3 Model 9100 Test and Selftest
...........................................................................
8-10
8.4 Printing Selftest Results
...................................................................................
8-26
Section 8 Appendix A Error Reporting Subsystem
.................................................. 8-A1
Section 9 Model 9100 — Specification Verification
9.1 About Section 9
................................................................................................
9-1
9.2 The Need for Verification
..................................................................................
9-1
9.3 Equipment Requirements
.................................................................................
9-2
9.4 Interconnections
...............................................................................................
9-2
9.5 Verification Points
.............................................................................................
9-3
9.6 Calculating Absolute Specification Limits
......................................................... 9-4
Section 10 Model 9100 — Calibration
10.1 About Section 10
..............................................................................................
10.1-1
10.2 The Model 9100 Calibration Mode
...................................................................
10.2-1
10.2.1 Introduction
.......................................................................................
10.2-1
10.2.2 Mode Selection
.................................................................................
10.2-2
10.2.3 Selection of Calibration Mode
...........................................................
10.2-2
10.2.4 Special Calibration
............................................................................
10.2-5
10.2.5 Cold Junction Calibration
..................................................................
10.2-8
10.2.6 Standard Calibration
.........................................................................
10.2-12
10.2.7 Overview of Calibration Operations
.................................................. 10.2-14
10.3 Standard Calibration — Basic Sequences
....................................................... 10.3-1
10.3.1 Introduction
.......................................................................................
10.3-2
10.3.2 Selecting Hardware Configurations
................................................... 10.3-4
10.3.3 Selecting Target Calibration Values
.................................................. 10.3-5
10.3.4 Calibrating the Model 9100 at Target Values
.................................... 10.3-9
10.3.5 Standard Calibration of AC Functions
............................................... 10.3-13
10.4 Front Panel Calibration by Functions
...............................................................
10.4-1
10.4.1 Introduction
.......................................................................................
10.4-1
10.4.2 Summary of Calibration Process
....................................................... 10.4-2
10.4.3 DC Voltage Calibration
......................................................................
10.4-6
10.4.4 AC Voltage Calibration
......................................................................
10.4-14
10.4.5 DC Current Calibration
......................................................................
10.4-20
10.4.6 AC Current Calibration
......................................................................
10.4-28
10.4.7 Resistance Calibration
......................................................................
10.4-36
10.4.8 Capacitance Calibration
....................................................................
10.4-45
10.4.9 Insulation Resistance Calibration
...................................................... 10.4-51
10.4.10 Continuity Calibration
........................................................................
10.4-57
10.5 Remote Calibration of the Model 9100 via the IEEE 488
Interface .................. 10.5-1
10.5.1 The Model 4950 MTS System
...........................................................
10.5-1
Wavetek-6369-Manual-Page-1-Picture
Start Free Download


Wavetek -- 9100 -- User Manual
File name: Wavetek-6370-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 168
Size: 22.45 Mbytes (23537459 Bytes)
Language: english
Revision: Issue 4.0
Manual-ID/Number: 850306
Date: April 1997
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 582b8a5bd10ed7bcc9fd9bcf77cb1586
ed2kID: ca6a9e47ba360f02c2bb84455600aa6d
Downloads: 87 since 09 November 2014
Information:
User's Handbook
Volume 3 Option 250: 250MHz Oscilloscope Calibration Module
Option 600: 600MHz Oscilloscope Calibration Module
Operation and Performance

Volume 3 — Model 9100 Universal Calibration System (This
Volume) Option 250: 250MHz Oscilloscope Calibration Module
Option 600: 600MHz Oscilloscope Calibration Module Operation
and Performance
Section 11 Options 250 & 600: 250MHz and 600MHz Oscilloscope
Calibration Module Page
11.1 About Section
1...........................................................................................................11-1
11.2 Introduction to Options 250 and
600..........................................................................
11-2
11.2.1
Functions....................................................................................................11-2
11.2.2 Operating
Modes........................................................................................11-3
11.2.2 System
Operation.......................................................................................11-3
11.3 Associated
Products....................................................................................................11-4
11.4 UUT Calibration Procedure
Library............................................................................11-4
11.5 Printer
Support............................................................................................................11-4
11.6 UUT Calibration
Certificates.......................................................................................11-5
11.6.1 Procedure Mode Results
Printouts.............................................................11-5
11.7 Inventory
Management................................................................................................11-5
11.8
Documentation............................................................................................................11-5
Section 12 Installing Option 250 or 600 Page
12.1 About Section
12........................................................................................................12-1
12.2 Oscilloscope
Connections...........................................................................................12-1
12.2.1
SIGOUT......................................................................................................12-1
12.2.2 TRIG
OUT....................................................................................................12-2
12.2.3 50Ω
Terminations.......................................................................................12-2
12.2.4 50Ω T-Connector and Extra
Cables...........................................................12-2
Section 13 Options 250 and 600 Controls Page
13.1 About Section
13.........................................................................................................13-1
Section 14 Using Options 250 and 600 — Manual Mode Page
14.1 About Section
14.........................................................................................................14.1-1
14.2
Interconnections..........................................................................................................14.2-1
14.2.1
Introduction..................................................................................................14.2-1
14.2.2 External
Interconnections...........................................................................14.2-1
14.2.3 UUT Oscilloscope
Signal............................................................................14.2-1
14.2.4 UUT Oscilloscope
Trigger...........................................................................14.2-2
14.3 'Auxiliary' Oscilloscope
Functions..............................................................................14.2-1
14.3.1
Introduction..................................................................................................14.3-1
14.3.2 Selection of Auxiliary and Oscilloscope
Functions.....................................14.3-2
14.3.3 Screen Keys — Function
Selection............................................................14.3-3
0-2
14.4 Square
Function.........................................................................................................14.4-1
14.4.1 Introduction and Topic
List...........................................................................14.4-1
14.4.2 Auxiliary and Oscilloscope Functions
Selection.........................................14.4-2
14.4.3 Square Function — Default
Screen............................................................14.4-2
14.4.4 Screen
Keys................................................................................................14.4-3
14.4.5 Value
Editing...............................................................................................14.4-4
14.4.6 Using the 9100 Square Function to Calibrate the
Amplitude Response
of a UUT
Oscilloscope................................................................................14.4-6
14.5 DC
Function...............................................................................................................
14.5-1
14.5.1 Introduction and Topic
List..........................................................................14.5-1
14.5.2 Auxiliary and Oscilloscope Functions
Selection.........................................14.5-2
14.5.3 DC Function — Default
Screen..................................................................14.5-2
14.5.4 Screen
Keys................................................................................................14.5-3
14.5.5 Value
Editing...............................................................................................14.5-4
14.5.6 Using the 9100 DC Function to Calibrate the DC-Coupled
Amplitude Response of a UUT
Oscilloscope..............................................14.5-6
14.6 Sine
Function...............................................................................................................14.6-1
14.6.1 Introduction and Topic
List..........................................................................14.6-1
14.6.2 Auxiliary and Oscilloscope Functions
Selection.........................................14.6-2
14.6.3 Sine Function — Default
Screen................................................................14.6-2
14.6.4 Screen
Keys................................................................................................14.6-3
14.6.5 Value
Editing...............................................................................................14.6-5
14.6.6 Using the 9100 Sine Function to Calibrate the
Flatness/Bandwidth
of a UUT
Oscilloscope................................................................................14.6-8
14.7 Edge
Function.............................................................................................................14.7-1
14.7.1 Introduction and Topic
List..........................................................................14.7-1
14.7.2 Auxiliary and Oscilloscope Functions
Selection.........................................14.7-2
14.7.3 Edge Function — Default
Screen...............................................................14.7-2
14.7.4 Screen
Keys................................................................................................14.7-3
14.7.5 Value
Editing...............................................................................................14.7-5
14.7.6 Using the 9100 Edge Function to Calibrate the Pulse
Response
of a UUT
Oscilloscope................................................................................14.7-8
14.8 Markers
Function........................................................................................................14.8-1
14.8.1 Introduction and Topic
List..........................................................................14.8-1
14.8.2 Auxiliary and Oscilloscope Functions
Selection.........................................14.8-2
14.8.3 Markers Function — Default
Screen..........................................................14.8-2
14.8.4 Screen
Keys................................................................................................14.8-3
14.8.5 Value
Editing...............................................................................................14.8-5
14.8.6 Trigger Timing
Relationship........................................................................14.8-7
14.8.7 Using the 9100 Markers Function to Calibrate the Time
Base
of a UUT
Oscilloscope................................................................................14.8-8
Section 15 Using the Model 9100 — Procedure Mode
15.1 About Section
15........................................................................................................15-1
16.2 9100 Options 250 and 600 — SCPI Language - Commands and
Syntax................. 16-2
16.2.1
Introduction..................................................................................................16-2
16.2.2 CALibration
Subsystem..............................................................................16-3
16.2.3 OUTPut
Subsystem....................................................................................16-3
16.2.4 SOURce
Subsystem..................................................................................16-4
Section 17 Options 250 and 600 Specifications Page
17.1
General.......................................................................................................................17-1
17.2 Products Provided with the Options 250 and 600 to the
Model 9100........................17-1
17.3 Square Function
Specifications..................................................................................17-2
17.4 DC Function
Specifications........................................................................................17-2
17.5 Sine Function
Specifications......................................................................................17-3
17.6 Edge Function
Specifications.....................................................................................17-4
17.7 Markers Function
Specifications................................................................................17-5
17.8 Trigger Out
Specifications..........................................................................................17-6
Section 18 Options 250 and 600 — Routine Maintenance and
Test Page
18.1 About Section
18.........................................................................................................18-1
18.2 9100 Options 250 and 600 Routine Maintenance and
Repair...................................18-1
18.3 Model 9100 Options 250 and 600 Test and
Selftest..................................................18-1
App. A: Error Reporting System — Additional Codes for
Options 250 and 600..................... 18-A1
Section 19 Verifying the Model 9100 Options 250 and 600
Specification Page
19.1 About Section
19.........................................................................................................19-1
19.2 Need for
Verification....................................................................................................19-1
19.3 Equipment
Requirements...........................................................................................19-2
19.4
Interconnections..........................................................................................................19-2
19.5 Verification
Points........................................................................................................19-2
19.6 Calculating Absolute Specification
Limits..................................................................19-3
19.7 Verification
Procedure.................................................................................................19-3
19.8 Options 250 and 600 Verification by Functions — Topic
List....................................19-4
19.8.1 Verifying the Edge
Function........................................................................19-5
19.8.2 Verifying the DC
Function...........................................................................19-11
19.8.3 Verifying the Square
Function....................................................................19-15
19.8.4 Verifying the Markers
Function...................................................................19-19
19.8.5 Verifying the Sine
Function.........................................................................19-22
Section 20 Calibrating the Model 9100 Options 250 and 600 Page
20.1 About Section 20
.........................................................................................................20.1-1
20.2 Front Panel Calibration by
Functions.........................................................................20.2-1
20.2.1 Introduction and Topic
List..........................................................................20.2-1
20.2.2 Summary of Calibration
Process................................................................20.2-2
20.2.3 Edge Function
Calibration..........................................................................20.2-3
20.2.4 DC Function
Calibration..............................................................................20.2-7
20.2.5 Square Function
Calibration.......................................................................20.2-11
20.2.6 Sine Function LF
Calibration......................................................................20.2-15
20.2.7 Sine Function HF Linearity
Calibration.......................................................20.2-19
20.2.8 Sine Function HF Flatness
Calibration.......................................................20.2-25
Wavetek-6370-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the word for the number 9.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics