Equipment information:

Wiltron 6629A Generator
Manufacturer:
Wiltron
Model: 6629A
Date: 1982
Category: Measurement instruments
Group: Generator
Description: PROGRAMMABLE SWEEP GENERATORS, MULTIBAND MODELS
Information:
                                    The 6600A Series (Figure 1-1) is a family of
microprocessor-based, pushbutton-controlled, GPIB-capable,
broadband signal sources that generate swept and CW
frequencies from 10 MHz to 40 GHz. This ever-expanding
family of sweepers presently consists of 29 models. These 29
models are divided into single-band and multiband sweep
generators, depending upon the number of internal bands used
for frequency-range coverage. Singleband models use one YIG
oscillator to span their range, whereas multiband models use
two or more YIGs, or a combination consisting of a YIG (or
YIGs) and a frequency down-converter.

1-4 IDENTIFICATION NUMBER

All WILTRON instruments are assigned a unique six-digit ID
number, such as "205001." The first digit of this ID (2 in
the example) represents the instrument's
year-of-manufacture; the next two (05), its manufacturing
"run;" and the last three (001), its serial number. Each
6600A Series sweep generator has two ID numbers assigned,
one for the basic frame and one for the RF deck. The ID
number for the RF deck, which provides primary
identification, is affixed to the outside of the rear panel.
The basic frame ID number appears on the inside of the rear
panel. Please use the primary (outside) serial number when
ordering parts or when corresponding with Customer Service.

1-5 OPTIONS

The following options are available for the 6600A Series
sweep generators:

•	Option 1, Rack Mount. Sweep generator comes equipped with
mounting ears and chassis track slides that have a 90° tilt
capability.

•	Option 2, 10 dB Step Attenuator. Sweep generator comes
supplied with a front panel or GPIB-programmable 10 dB step
attenuator. Step attenuator has a 70 dB range.

•	Option 3, GPEB Interface. Sweep generator is equipped to
operate on the IEEE-488 (IEC-625) Interface Bus. With Option
3 installed, all front panel pushbuttons except POWER are
bus-programmable. Option 3 may be installed in the field.

•	Option 9, Main RF Connector on Rear Panel. Sweep generator
comes supplied with an SMA female connector installed on the
rear panel rather than on the front panel.

•	Option 10, Auxiliary RF Output Connector (Rear Panel).
Sweep generator comes equipped with a second RF connector
(SMA female) installed on the rear panel.

Its output power level is approximately 25 dB below the main
connector power level, and its Maximum Leveled Power
specification is derated by 1.5 dB.

Option 12, RF Output Interface, Sweep Generator to Model 661
Tracking Sweeper

Controller. Sweep generator comes supplied with a rear panel
SMA connector for supplying a 10 dB attenuated RF sample to
the Model 661 Tracking Sweeper Controller.
Option 13, Hardware Interface to HP 5342 or HP 5343A
Microwave Counter. Sweep generator comes supplied with a
rear panel BNC connector that allows the HP counter to be
used to count the marker frequency (ies).
•	Option 14, Data I/O Rear Panel Connector. Sweep generator
comes supplied with a 37-pin Data I/O connector for
interfacing the Model 661 Tracking Sweeper Controller with
the IEEE-488 Interface Bus. Sweep generator must also have
Option 3 .

These manuals are available for the above equipment:

Wiltron -- 6629A -- Service and User Manual
File name: Wiltron-6256-Manual-Page-1-Picture
Manual Type: Service and User Manual
Pages: 76
Size: 2.18 Mbytes (2288946 Bytes)
Language: english
Revision:
Manual-ID/Number: 1-6600A/MB-OMM
Date: October 1982
Quality: Scanned document, all readable.
Upload date:
MD5: fd652a016c5b696e5140176f17ae9a72
ed2kID: d718ca32bb73d2d916377f251f1ca6ba
Downloads: 807 since 31 July 2014
Information:
This manual is the operation and maintenance (O&M) manual
for the multiband models (paragraph 1-3) of the 6600A Series
Programmable Sweep Generator. The manual provides general
information, installation, operation, performance
verification, calibration, replaceable parts, and
maintenance/service information and instructions. Refer to
the Table of Contents for the manual organization.
Wiltron-6256-Manual-Page-1-Picture
Start Free Download


Wiltron -- 6629A -- Service and User Manual
File name: Wiltron-9539-Manual-Page-1-Picture
Manual Type: Service and User Manual
Pages: 300
Size: 37.73 Mbytes (39565097 Bytes)
Language: english
Revision: revised
Manual-ID/Number: 1-6600A/MB-OMM
Date: 01 October 1983
Quality: Scanned document, all readable.
Upload date:
MD5: 1b1163c1f153077315e3e4171b846294
ed2kID: 18714a616b22178e24ad32f276881bcb
Downloads: 19 since 17 September 2017
Information:
This manual is the operation and maintenance (O&M) manual
for the multiband models (paragraph 1-3) of the 6600A Series
Programmable Sweep Generator. The manual provides general
information, installation, operation, performance
verification, calibration, replaceable parts, and
maintenance/service information and instructions.
Wiltron-9539-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Out of 56, 14 or 27, which is the smallest?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics