Equipment information

Yaesu FT-900 Transceiver
Manufacturer
Yaesu
Model FT-900
Date 1994
Category: Radio, Communication
Group Transceiver
Description
Information
                                    Specification
General

Receiving frequency range: 100 kHz ~ 30 MHz Transmitting
frequency ranges:

160 - 10 meter Amateur Bands

Frequency stability: ±10 ppm (SSB, CW, AM) from -10° - +50°
C or ±2 ppm from 0° ~ 50° C (SSB. CW, AM w/TCXO-3 option)

Emission modes: USB, LSB(J3E), CW(A1A), AM(A3E), FM (F3E)

Frequency Tuning Steps:

2.5 Hz/ 5.0 Hz/ 10 Hz (CW, SSB) 100 Hz (AM, FM)

Antenna impedance: 50 Ω nominal(w/o ATU)

16.7 -150 Ω with ATU (unbalanced)

Operating temp, range: -10° C ~ +50° C

Supply voltage: 13.5-VDC ±10%, negative ground

Power consumption (approx): 1.5 A rx (no signal)

20 A tx( 100 watts)

Dimensions (WHD): 238 x 93 x 253 mm (w/o knobs) Weight
(approx): 5.3 kg

These manuals are available for the above equipment:

Yaesu -- FT-900 -- Service Manual
File name Yaesu-6237-Manual-Page-1-Picture
Manual Type Service Manual
Pages 173
Size 27.52 Mbytes (28861222 Bytes)
Language english
Revision
Manual-ID/Number
Date 1994
Quality Scanned document, all readable.
Upload date
MD5 1fd0c23b4b3d68a4141299402f495c92
Downloads 1031 since 27 July 2014
Information
Introduction & Chip Component Replacement ...............1

Specifications...................................1-2

Circuit Board Access, Battery Replacement and CPU
Resetting......2

Alignment.....................................3

Circuit Description................................4

Block & Interconnection Diagrams.......................5

PCB Diagrams & Parts Lists...........................6

Local Unit...........................................6A

RF Unit, Notch
Unit..........................................................................6B

Control (CNTL)-l Unit...................................6C	^

Power Amp (PA) Unit....................................6D

LPF Unit............................................6E

CAR-DDSUnit................................................................................6F

SUB-DDS
Unit................................................................................6G

Control (CNTL)-2 Unit...................................6H

BLUnit........................................................................................61

SWUnit............................................6J

VR, MIC Unit.........................................6K

CONNECT-1/-2, SPJ Unit..................................6L

Mechanical Details (Exploded Views & Mechanical
Parts)....................7

Accessory & Options (parts)

ATU-2 Automatic Antenna Tuner
(option)........................8A-1

MH-31A8J Hand-Held Microphone (accessory).....................8B


This manual provides technical information necessary for
servicing the Yaesu FT-900 HF Transceiver. It does not
include information on specifications, installation and
operation, which are described in the FT-900 Operating
Manual, provided with each transceiver, or on FT-900
accessories, which are described in manuals provided with each.

Servicing this equipment requires expertise in handling
surface mount chip components. Attempts by non-qualified
persons to service this equipment may result in permanent
damage not covered by warranty. For the major circuit
boards, each side of the board is identified by the type of
the majority of components installed on that side. In most
cases one side has
only chip components, and the other has either a mixture of
both chip and lead components (trimmers, coils, electrolytic
capacitors, packaged ICs, etc.), or lead components only.
Yaesu-6237-Manual-Page-1-Picture
Start Free Download


Comments (2)

 
 
Topic: Yaesu FT-900
0/5 (0)
 
Gravatar
New
Raul Fernandez
Gravatar
1
0
0
Sep 2017
Raul Fernandez says...
gracias me es muy útil para reparar mi radio.
Gravatar
New
Earl McClure
Gravatar
1
0
0
Feb 2017
First Poster
Earl McClure says...
Have one that needs work

Add Comment

* Required information
1000
Enter the fifth word of this sentence.
Powered by Commentics