Equipment information

Advance Instruments J1B Generator
Advance Instruments
Model J1B
Date 1965
Category: Measurement instruments
Group Generator
Description Signal Generator
                                    The JIB and J2B Signal Generators, like their
well-established forerunners
the J1 and J2, are two similar instruments which provide
sinusoidal outputs in the frequency range 15c/s to 5 0 k c
/s. Two
separate output arrangements with continuous level control
are provided
on each instrument. One output is of 600S2 impedance and
isolated from earth, having a maximum output level of 1W; the
alternative output has an impedance of 5fi connected to
earth and with
an output level of at least 500 milliwatts.
The JIB version of the instrument uses a calibrated output
control to
give an indication of output level, while the J2B output
level is indicated
on a front panel meter .
Each instrument contains a resistance-capacitance Wien bridge
oscillator which is connected to the output stage via a
buffer amplifier
. The inherent stability of the oscillator and the use of
circuits contribute to an output which is substantially
constant over
the whole frequency range. Overall distortion at full output
is less than 2% (34dB down on fundamental).

These manuals are available for the above equipment:

Manual Type Service and User Manual Advance-5730-Manual-Page-1-Picture
Pages 7
Size 255.32 Kbytes (261444 Bytes)
Language english
Date 1965
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 4d88f80d99efeb30ee8d1ab9bedac616
Downloads 364 since 22 April 2014

Manual Type Service and User Manual Advance-9413-Manual-Page-1-Picture
Pages 4
Size 346.47 Kbytes (354787 Bytes)
Language english
Date 01 January 1965
Quality Scanned document, all readable.
Upload date
MD5 1424d221587bdfd11324a0a31217601d
Downloads 58 since 26 August 2017

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics