Equipment information

Advance Instruments PP3 Power supply
Manufacturer
Advance Instruments
Model PP3
Date
Category: Measurement instruments
Group Power supply
Description Twin Stabilised D.C. Supplies
Information
                                    The Twin Stabilised D.C, Supply PP3 is a portable instrument
providing two independent and floating stabilised d.c.
supplies, each variable from 0 to 3ÖV at 1A maximum. The two
supplies can be used separately, or connected in series lo
provide a maximum output of 60V at 1A.

In both sections of the instrument, the range is covered in
three overlapping nominal 10V steps, with fine adjustment
provided by a variable control directly calibrated in volts.
A voltmeter and a dual-range ammeter are provided, and these
can be switched independently to monitor either section.

Both sections are provided with four terminal output
networks which virtually eliminate the effect of
resistance in the connecting leads to the load.

Overload protection is effected by an electronic circuit
which affords complete protection against both progressive
and sudden short circuit overloads. This circuit is reset
from the front panel by operation of the on/off switch.

The instrument will operate from a.c. supplies of 90 to 130V
and 200 to 240V. Fuses are provided to protect against both
supply surges and internal component failure. The Twin
Stabilised D.C. Supply PP3R is a 19-inch rack mounting
version of the PP3. The specification is identical to the
PP3 but the PP3R has the additional facility of the output
being available on a 10-way terminal block at the rear of
the instrument.

These manuals are available for the above equipment:

Advance Instruments -- PP3 -- Service and User Manual
File name Advance-5728-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 13
Size 394.63 Kbytes (404106 Bytes)
Language english
Revision
Manual-ID/Number 245
Date
Quality Scanned document, all readable.
Upload date
MD5 76f0960a6e0ee49579da34c8715524b0
Downloads 391 since 22 April 2014
Information
Advance-5728-Manual-Page-1-Picture
Start Free Download


Advance Instruments -- PP3 -- Service and User Manual
File name Advance-9408-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 13
Size 522.65 Kbytes (535192 Bytes)
Language english
Revision
Manual-ID/Number 245
Date
Quality Scanned document, all readable.
Upload date
MD5 730f17666caaf877385d244d72c0bcb7
Downloads 23 since 26 August 2017
Information
SECTION I	Introduction	3

SECTION 2	Specification	4

SECTION 3	Operating Instructions	5

3.1	Preparations for Use	5

3.2	Metering	5

3.3	Overload	5

3.4	Four Terminal Network	5

3.5	Fuses	5

SECTION 4
	Circuit Description	6

4.1	General	6

4.2	Stabilising Circuit	6

4.3	Overload Cut-out
	 
SECTION 5
	Maintenance	7

5.1	General	7

5.2	Realignment of Voltage Calibration 7

5.3	Adjustment of Overload Cut-out	7 

SECTION 6	Components List	9 

SECTION 7	Factory Service	10
Advance-9408-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the third letter of the word castle.
Powered by Commentics