Equipment information:

Huntron Instruments HTR 1005B-1JS Test Set
Manufacturer:
Huntron Instruments
Model: HTR 1005B-1JS
Date: 1983
Category: Measurement instruments
Group: Test Set
Description: Tracker
Information:
                                    The HUNTRON TRACKER® is a special type of CRT display and
signal processing instrument that can be used to determine
the quality of certain types of electronic components.

Components are tested with a two terminal system of test
leads that are placed across the component under test. The
test leads are inserted into the TRACKER® front panel. The
TRACKER® is used to test components in a power-off
condition, and can be used to test components mounted on
printed circuit boards or other in-circuit conditions even
with components bridged by various types of resistive values.

Devices that are normally tested by the TRACKER® include the
following: semiconductor diodes, bipolar transistors, and
field effect transistors; bipolar and MOS integrated
circuits, including both analog and digital; certain types
of capacitors and inductors.

Included as standard equipment with each TRACKER® is a set
of HUNTRON® MICRO PROBES™. The MICRO PROBE™ leads plug into
the front panel test jacks. MICRO PROBES™ have special tips
so that they can be used to contact very small component
terminals and small PCB etchings without the danger of
shorting adjacent terminals and leads. Also included as
standard equipment is a common test lead which is used with
the TRACKER® in the “Comparatrace” mode.

These manuals are available for the above equipment:

Huntron Instruments -- HTR 1005B-1JS -- Service and User Manual
File name: Huntron-5656-Manual-Page-1-Picture
Manual Type: Service and User Manual
Pages: 38
Size: 1.60 Mbytes (1681756 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date: 1983
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 95feef96fbd959699bb9def39760c589
ed2kID: 0085bdd8bf7501adb0321bfa03926cde
Downloads: 233 since 11 March 2014
Information:
SPECIFICATIONS..................................................................................................................2

GENERAL
DESCRIPTION.......................................................................................................3

THEORY OF
OPERATION.........................................................................................................5

The Test
Signal................................................................................................................5

Testing Reactive
Components......................................................................................8

CIRCUIT DESCRIPTION

Signal
Section..............................................................................................................10

Oscillator...................................................................................................................12

Power
Supply............................................................................................................12

Cathode Ray Tube
Circuit.............................................................................................12

INTERNAL SETUP AND
ADJUSTMENTS................................................................................17

TROUBLE SHOOTING

General
Information....................................................................................................19

Power
Supply............................................................................................................19

Signal
Section..............................................................................................................22

CRT
Section....................................................................................................................24

Oscillator
Section....................................................................................................24

LIST OF REPLACEMENT
PARTS............................................................................................25

SETUP, ADJUSTMENT & SCHEMATIC FOR SERIAL# PREFIX
212..................................33
Huntron-5656-Manual-Page-1-Picture
Start Free Download


Huntron Instruments -- HTR 1005B-1JS -- User Manual
File name: Huntron-5657-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 110
Size: 2.18 Mbytes (2284632 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date:
Quality: Scanned document, all readable.
Upload date:
MD5: 11f02491d1b38b68dfa91b41a965b274
ed2kID: f82db611e91d144db7c60ab6ec2a7053
Downloads: 207 since 11 March 2014
Information:
This manual is provided for the operator of the Huntron
Tracker. The information contained within this manual
familiarizes the reader first with the tracker and its
principles of operation, and then with its specific uses. A
working knowledge of the tracker’s operating principles
greatly assists the user in evaluating the tracker’s
display, especially when using the instrument for
troubleshooting purposes.

The manual is divided into sections. Each section contains
information pertinent to a certain application of the unit.
The sections contain the following information.

Section l - GENERAL INFORMATION

This section provides a description of the tracker and lists
its specifications. It also describes the principles on
which the tracker operates, using a pure resistance and a
diode as examples.

Section 2 - TRACKER OPERATION

This section describes the front panel controls of the
tracker. It also describes the tracker’s comparative testing
feature.

Section 3 - DIODE TESTING

This section describes the characteristics of the diode
(showing its voltage-to-current relationship), which is
essential to understanding the tracker display. This section
also illustrates and describes tracker displays produced
when the test leads are connected to (or across) circuits
containing the following devices: silicon diodes, high
voltage silicon diodes, zener diodes, bridging diodes, and
light-emitting diodes.

Section 4 - TRANSISTOR TESTING

This section illustrates and describes tracker displays
produced when the test leads are connected to (or
across) circuits containing the following devices: NPN and
PNP transistors, Darlington pairs, germanium transistors,
MOSFET’s, J-FET’s, and unijunction transistors.

Section 5 - PASSIVE COMPONENTS

This section describes and illustrates tracker displays
produced when the test leads are connected to capacitive,
inductive, and resitive circuits or devices.

Section 6 - TESTING MULTIPLE COMPONENT CIRCUITS

This section covers the testing of diode/resistor
combinations. diode/capacitor combinations, and
capacitor/resistor combinations.

Section 7 - TESTING INTEGRATED CIRCUITS

This section discusses integrated circuit technology
followed by testing information for linear devices such as
operational amplifiers and voltage regulators. Testing
information is also provided for the LM555 Timer as well as
TTL. LS TTL, and CMOS devices.

Section 8 - TESTING RECTIFIERS

This section describes the testing of silicon-controlled
rectifiers and TRIAC devices.

Section 9 - TESTING POWER SUPPLIES

This describes how to use the tracker to test the typical
transformer/full-wave bridge type'power supply.

Section 10 - TESTING COMPONENTS BY COMPARISON

This section provides tracker displays for defective
components as compared to known good devices. The tracker is
used in the alternate mode to check a high voltage
transistor, a high voltage diode, an electrolytic capacitor,
an op-amp, and a regulator.
Huntron-5657-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Which word in this sentence is bold?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics