Equipment information

KLM electronics PA 2-70BL Amplifier
Manufacturer
KLM electronics
Model PA 2-70BL
Date
Category: Radio, Communication
Group Amplifier
Description Linear VHF Amplifier
Information
                                    This series of amplifiers is designed for 143 to 149 Mhz 2
meter band operation. The designs use the latest in
micro-stripline techniques and highest quality state of the
art transistors. Relay switching is automatic RF sensing.
These units do not require any tuning. The boardband design
offers the ultimate in flat input VSWR, 1.4:1 or less, and
produces rated power output or better across the entire two
meter band. This amplifier can be used for AM or SSB
operation as well as FM and CW.

The front panel switch on all models switches the amplifier
in or out. With the switch “in”, the 13.5 VDC is supplied to
the RF sensing and relay 'circuit inside the amplifier,
however, the unit will not draw any current until the
transceiver or transmitter.is keyed and RF is applied to the
amplifier. At this point an audible click of the relay can
be heard and the LED light on the front panel will light.
The amplifier will now amplify the RF applied. In the “out”
position, the amplifier will bypass the RF through the
amplifier.

These manuals are available for the above equipment:

KLM electronics -- PA 2-70BL -- User Manual
File name KLM-5474-Manual-Page-1-Picture
Manual Type User Manual
Pages 4
Size 172.37 Kbytes (176504 Bytes)
Language english
Revision
Manual-ID/Number
Date
Quality Scanned document, all readable.
Upload date
MD5 c0f3761d1a5b3df8d61f4897b35b136a
Downloads 780 since 17 February 2014
Information
KLM-5474-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the fifth word of this sentence.
Powered by Commentics