Equipment information

Kodak Megaplus ES 310 Digital camera
Manufacturer
Kodak
Model Megaplus ES 310
Date
Category: Audio, Video, TV, Multimedia
Group Digital camera
Description
Information
                                    The KODAK MEGAPLUS Camera, Model ES 310 is intended for machine
vision, medical imaging, and many other applications. The
camera package is
compact and is operated through a connection to a host
computer. The AIA
interface connector, located on the camera’s rear panel,
sends digital output video
to the computer and receives control commands from the computer.
Featuring an interline Charge Coupled Device (CCD) sensor
array, the camera has
648(H) x 484 (V) light sensitive elements (pixels). These
pixels are 9 microns
square and have a center to center spacing of 9 microns with
a 60 % fill ratio.
The camera operates continuously or in a triggered mode.
Exposure times as
short as 94 microseconds are possible with the camera’s
electronic shutter and
the frame rate is unaffected by the exposure time in
continuous mode. The
camera has a dual output channel data rate of 20 MHz, with
the fastest full frame
rate being 85 frames per second. Faster frame rates are
possible in some operating
modes. The camera can be connected to many commercially
available frame
grabber boards capable of handling eight bits of digital
video data, and requires
only eight watts of power.

These manuals are available for the above equipment:

Kodak -- Megaplus ES 310 -- User Manual
File name Kodak-5455-Manual-Page-1-Picture
Manual Type User Manual
Pages 47
Size 419.25 Kbytes (429314 Bytes)
Language english
Revision A
Manual-ID/Number 91000086-001
Date
Quality Electronic document, no scan, very well readable.
Upload date
MD5 4a21f61fa8dacf7a0da6c008faa5c4f5
Downloads 143 since 26 January 2014
Information
Table of Contents
CHAPTER 1. INTRODUCTION
Introduction
.......................................................................................................
1.1
How to Use This Manual
..................................................................................
1.2
Warranty
...........................................................................................................
1.3
Precautions
........................................................................................................
1.4
CHAPTER 2. CONTROLS AND CONNECTORS
Camera
..............................................................................................................
2.1
Camera Rear Panel
............................................................................................
2.2
Cables
................................................................................................................
2.4
Hardware Setup
.................................................................................................
2.5
Routine Maintenance
........................................................................................
2.6
CHAPTER 3. CAMERA OPERATION
Introduction
.......................................................................................................
3.1
Serial Interface Protocol
...................................................................................
3.2
Using RS485 Multi-Drop
..................................................................................
3.4
Selecting Video Output Options
.......................................................................
3.6
Selecting an Operating Mode
............................................................................
3.8
Setting Exposure Time
......................................................................................
3.10
Selecting a Trigger Mode
..................................................................................
3.13
Controlling Camera Black Level
......................................................................
3.14
Setting Camera Gain
.........................................................................................
3.15
Saving Camera Configurations
.........................................................................
3.16
Displaying a Test Pattern
..................................................................................
3.17
Query Commands
.............................................................................................
3.18
CHAPTER 4. INTERFACE SPECIFICATIONS
AIA Interface Connector
...................................................................................
4.1
Cable Descriptions
............................................................................................
4.3
Timing Waveforms
...........................................................................................
4.5
Specifications
....................................................................................................
4.7
Kodak-5455-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the last letter of the word satellite.
Powered by Commentics