Equipment information:

IFR FM/AM-1600S Communications Service Monitor
Manufacturer:
IFR
Model: FM/AM-1600S
Date: 1991
Category: Radio, Communication
Group: Communications Service Monitor
Description:
Information:
                                    The FM/AM-1600S is a microprocessor controlled, digitally
synthesized communication service monitor which combines the
operations of many different test instruments into a single,
compact unit. Functions the FM/AM-1600S is capable of
performing include:

RF Generator Duplex

Spectrum Analyzer DMM

Distortion Meter Audio Frequency Meter RF Power Meter Signal
Strength Meter Phase Meter Tracking Generator Digital Radio
Paging Encode and Decode
Receiver AF Generator Oscilloscope Deviation (Peak) Meter
SINAD Meter Frequency Error Meter Modulation Meter Bit Error
Rate Meter Deviation (RMS) Meter Cable Fault Detector Analog
Radio Paging Encode and Decode

The FM/AM-1600S utilizes an alphanumeric keypad, dedicated
function keys, multitask "Soft" Function Keys and a
high-resolution color CRT to display, enter and edit
functions and data. Testing with this instrument can be done
remotely or manually. The FM/AM-1600S can perform tests from
pre-programmed setups or formats determined at the time of
the test.

Microprocessor controlled memory allows storage and recall
of parameters for each of the testing modes as well as
storage and recall of Oscilloscope and Spectrum Analyzer
traces for signal comparison.

These manuals are available for the above equipment:

IFR -- FM/AM-1600S -- User Manual
File name: IFR-5372-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 478
Size: 14.44 Mbytes (15143113 Bytes)
Language: english
Revision: 2
Manual-ID/Number: 1002-8600-000
Date: 1991
Quality: Scanned document, all readable.
Upload date:
MD5: 9dfc3c965ee43df58766d68fab3f9383
ed2kID: dc7f54d6de4d78beb5b72e9cee6be746
Downloads: 141 since 20 January 2014
Information:
This manual contains instructions for operating the
FM/AM-1600S Communications Service Monitor. The instruction
level is relatively basic and presupposes no previous
experience on the part of the operator with a communication
service monitor of this type. A basic understanding of
communication electronics and practical troubleshooting
methods is helpful. It is strongly recommended that the
operator be thoroughly familiar this manual before
attempting to operate the unit.

ORGANIZATION

The FM/AM-1600S Operation Manual is composed of the
following sections:

SECTION 1 - INTRODUCTION

Provides an introduction to the unit and a brief overview of
unit functions. Specifications are also included in this
section.

SECTION 2 - INSTALLATION

Provides a step-by-step procedure for placing the
FM/AM-1600S into operation.

SECTION 3 - DESCRIPTION OF CONTROLS, CONNECTORS AND INDICATORS

Identifies and functionally describes all FM/AM-1600S
controls, connectors and indicators. Additionally, all CRT
Operation Screens and Menus are identified and available
parameters listed and explained.

NOTE: As an operating aid, Figures 3-1 and 3-2, which locate
and identify all

FM/AM-1600S controls, connectors and indicators, are located
on a fold-out page. By extending the fold-out page, the
operator can reference any front or rear panel control while
simultaneously performing any operating procedure contained
elsewhere in the manual.

SECTION 4 - OPERATION

Provides instructions for operating the FM/AM-1600S Mode
Operating Screens and Menus. In addition, this section
contains a selection of basic operating procedures
pertaining to all major functions of the Test Set.

SECTION 5 - PERFORMANCE EVALUATION

Identifies and explains procedures the operator can use to
insure the FM/AM-1600S is performing properly.

SECTION 6 - REMOTE OPERATION

Provides procedures for configuring and operating the
FM/AM-1600S remotely. Lists unit specific commands for
remote operations as well as commands mandated by IEEE 488.2
1987.
IFR-5372-Manual-Page-1-Picture
Start Free Download


IFR -- FM/AM-1600S -- User Manual
File name: IFR-6761-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 428
Size: 12.60 Mbytes (13216305 Bytes)
Language: english
Revision: 1.10
Manual-ID/Number: 1002-8600-000
Date: 1992
Quality: Scanned document, all readable.
Upload date:
MD5: 154a1375e4ea7f9ae2d5989f9cd0d3ac
ed2kID: e1c434f39964f2d7b58e6da3f1e4b9d4
Downloads: 42 since 23 May 2015
Information:
This manual contains instructions for operating the
FM/AM-1600S Communications Service Monitor. The instruction
level is relatively basic and presupposes no previous
experience on the part of the operator with a communication
service monitor of this type. A basic understanding of
communication electronics and practical troubleshooting
methods is helpful. It is strongly recommended that the
operator be thoroughly familiar this manual before
attempting to operate the unit.
ORGANIZATION
The FM/AM-1600S Operation Manual is composed of the
following sections:
SECTION 1 - INTRODUCTION
Provides an introduction to the unit and a brief overview of
unit functions. Specifications are also included in this
section.
SECTION 2 - INSTALLATION
Provides a step-by-step procedure for placing the
FM/AM-1600S into operation.
SECTION 3 - DESCRIPTION OF CONTROLS, CONNECTORS AND INDICATORS
Identifies and functionally describes all FM/AM-1600S
controls, connectors and indicators. Additionally, all CRT
Operation Screens and Menus are identified and available
parameters listed and explained.
NOTE: As an operating aid, Figures 3-1 and 3-2, which locate
and identify all
FM/AM-1600S controls, connectors and indicators, are located
on a fold-out page. By extending the fold-out page, the
operator can reference any front or rear panel control while
simultaneously performing any operating procedure contained
elsewhere in the manual.
SECTION 4 - OPERATION
Contains instructions for operating the FM/AM-1600S Mode
Operating Screens and Menus, in addition, this section
contains a selection of basic operating procedures
pertaining to ail major functions of the set.
SECTION 5 - PERFORMANCE EVALUATION
identifies and explains procedures the operator can use to
insure the FM/AM-1600S is performing properly.
SECTION 6 - REMOTE OPERATION
Contains step-by-step procedures for configuring and
operating the FM/AM-1600S remotely. Lists unit specific
commands for remote operations as well as commands mandated
by IEEE 488.2 1987.
IFR-6761-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Is ice cream hot or cold?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics