|Skanti TRP6000 Receiver|
|Category:||Professional music equipment|
The TRP 6000 is an SSB Radiotelephone equipment for duplex, semiduplex and simplex communications in the maritime mobile bands from 1.6 to 4.5 MHz. The novel design of the SKANTI TRP 6000 breaks with the traditional SSB radiotelephone concept. The TRP 6000 is divided into two units, a handy CONTROL UNIT and a fully remote controlled TRANSMITTER UNIT (fig. 1.1). The Control Unit (CU 6000) contains all receiver and transmitter operating controls and is housed in a non-metallic, non-magnetic cabinet. This combined with the small dimensions of the cabinet ensures maximum installation flexibility. The transmitter Unit (TU 6400, 400 W or TU 6200, 200 W) is fully remote controlled and may be installed up to 50 metres from the Control Unit where most convenient with respect to antenna lead-in, grounding and the battery connections, thus reducing the well-known problems of power-loss and radio frequency interference caused by long antenna- and ground-wires. The Transmitter Unit is housed in a rugged nylon-coated steel cabinet and contains the fully solid state linear power amplifier, the power supply and the automatic tuning system. Cooling is performed by temperature controlled fans switched on only under heavy duty operation. The microprocessor equipped Control Unit contains two separate frequency synthesizers and two frequency displays for the receiver and transmitter functions. Frequency selection is carried out via a common keyboard. A single key operation instantly selects 2182 kHz operation. The keyboard permits the operator to program up to 20 channels with his busiest receiving and transmitting frequency pairs, and to recall each channel with a few key operations. The TRP 6000 will store the programmed channels for several years, even when switched off. Where required by the authorities, the TRP 6000 will contain a transmitter-frequency PROM with a capacity of up to 80 frequencies. Transmitter keying can only then take place exclusively on the authorized frequencies programmed into the PROM. The keyboard permits recall and display of all the frequencies contained in the PROM. Due to the all solid state design the TRP 6000 is ready for operation within seconds after being switched on. The automatic tuning system ensures optimum antenna matching under all conditions. This results in maximum RF output power for reliable short, medium and long range communications.
These manuals are available for the above equipment:
|Skanti -- TRP6000 -- Service and User Manual|
|Manual Type||Service and User Manual|
|Size||9.66 Mbytes (10132003 Bytes)|
|Quality||Scanned document, all readable.|
|Upload date||12 January 2014|
|Downloads||272 since 12 January 2014|
DISTRESS OPERATION ON 2182 kHz 0 1. INTRODUCTION TO TRP 6000 1-1 2. OPERATION 2-1 2.1. Operating instructions - short form 2-1 2.2. Detailed description of operating controls 2-9 3. PREVENTIVE MAINTENANCE 3-1 4. TROUBLE SHOOTING AND SERVICE 4-1 4.1. Malfunction 4-1 4.2. Battery 4-1 4.3. Replacement of fuses 4-1 4.4. How to use the built-in selfcheck function 4-2 4.5. Transmitter Unit fault finding 4-5 4.6. How to manually tune the transmitter to 21 82 kHz 4-6 4.7. Spare parts list 4-7 5. TECHNICAL DATA 5-1 6. TECHNICAL DESCRIPTION 6-1 7. INSTALLATION 7-1 8. CIRCUIT DIAGRAMS AND PARTS LISTS 8-1
|Start Free Download|
No comments yet. Be the first!