Kikusui Electronics Corporation 538 Oscilloscope
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Kikusui Electronics Corporation 538 ?
If you have any other manuals for the
Kikusui Electronics Corporation 538 you can upload the files here .
Model:
538
Date:
Category:
Group:
Description:
Universal Purpose Oscilloscope
Information
The model 538 is a compact, highly reliable, universal
purpose Oscilloscope which employs compact 75mm round screen
cathode-ray tube, solid-state electronics, and unique light
weight metallic alloy housing
The vertical system provides a sensitivity of 1 0 mV/div or
over and a frequency bandwidth of DC~ 1.5 MHz. It has a
direct CRT input terminal.
The time axis circuit provides sweep frequencies of 10 Hz ~
100 kHz sweep and synchronizing with INT M - ” only. When
this circuit is switched over to the external sweep mode, it
provides a deflection sensitivity of 250 mV/d or over and a
frequency band of DC ~ 500 kHz. The external signal is
applicable through a front panel terminal. This mode can be
employed for X - Y operation of the Oscilloscope, providing
a high operation flexibility.
Since solid-state, electronics is employed throughout the
circuits, the Oscilloscope can start operating only in less
than 20 seconds after its power is turned on. Since
heat-generating components and hence the instrument wattage
are minimized, the drift is very small and an improved
operation reliability is__attained.
Manual type:
User Manual
Pages:
23
Size:
915.68 Kbytes (937655 Bytes)
Language:
english
Revision:
Manual ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2017 09 02
MD5:
2144de9dba80810ae60ecb1fbe4a1b86
Downloads:
432
Information
1. GENERAL ... 1
2. SPECIFICATIONS ... ... 2
3. EXPLANATION OF -PANEL ... ... 4
4. OPERATING PROCEDURE ... • ... 8
4-1 First Operation ... 8
4-2 • Application ... * ... 9
5. CAUTION ON OPERATION ... 12
5-1 Supply Line Voltage ... ' ... 12
5-2 Fuse ... 12
5 - 3 Ambient Temparature ... 12
5-4 Maximum Input Voltage ... 12
5-5 Life of the CRT ... 13
5-6 Maximum Input Voltage to EXT HORIZ IN Terminal without
Distortion of Waveform ... 13
6. MAINTENANCE AND CALIBRATION ... 14
6 - 1 Case Removal ... ... 14
6-2 Change of Supply Line Voltage • • • ... 14
6-3 Exchange of the Fuse ... 14
6-4 Adjustment of DC Balance ... 14
6 -.5 Phase Compensation for VERT GAIN switch ... 15
6-6 Adjustment of High Frequency Response Compensation
of the Vertical Amplif ier ... ... 15
6-7 Adjustment of Horizontal DC Balance • • ... 16
.6-8 Adjustment of Trace Alignment ... 16