Geräte Informationen:

Hewlett Packard 8554B
Hersteller:
Hewlett Packard
Modell: 8554B
Datum: 1973
Kategorie: Messgeräte
Gruppe:
Beschreibung: Spectrum Analyzer RF Section
Informationen:
                                    The HP Model 8554B Spectrum analyzer RF Section covers the
frequency range from 100 kHz to 1250 MHz. When it is
combined with an IF Section and a Display Section it
functions as the tuning section of an RF spectrum analyzer.

The analyzer electronically scans input signals and displays
their frequency and amplitude on a CRT. The horizontal,
x-axis, is calibrated in units of frequency and the
vertical, y-axis, is calibrated in absolute units of voltage
(/j.V or mV) or power (dBm). Absolute or relative
measurements of both amplitude and frequency can be easily made.

Folgende Anleitungen sind hier verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung HewlettPackard-4930-Manual-Page-1-Picture
Seitenanzahl: 197
Dateigröße: 23.35 Mbytes (24483679 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 08554-90035
Datum: September 1974
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: 07924ca39b04ce2132663c09605eb300
Downloads: 173 seit dem 27 November 2013
Informationen:
This manual applies directly to instruments with serial
numbers prefixed 1245A.

For additional important information about serial numbers,
see INSTRUMENTS COVERED BY MANUAL in Section I.

Section II, Installation: provides information about initial
inspection, preparation for use, and storage and shipment.

Section III, Operation: provides information about panel
features, and provides operating checks, instructions, and
maintenance information.

Section IV, Performance Tests: provides the information
required to verify that the instrument is performing as
specified in Table 1-1.

Section V, Adjustments: provides the information required to
properly' adjust and align the instrument.

Section VI, Replaceable Parts: provides ordering information
for all replaceable parts and assemblies.

Section VII, Manual Changes: this section is reserved to
provide manual change information in future revisions of
this manual.

Section VIII, Service: provides the information required to
repair the instrument.
HewlettPackard-4930-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics