Hewlett Packard 8565A Spektrumanalysator
Hersteller:
Kein Bild verfügbar!
Vielleicht kannst du ein Bild für
Hewlett Packard 8565A
hochladen ?
Wenn du andere Handbücher für ein
Hewlett Packard 8565A hast,
kannst du die Dateien hier hochladen .
Modell:
8565A
Datum:
1977
Kategorie:
Gruppe:
Beschreibung:
Information
The HP Model 8565A Spectrum Analyzer provides a visual
display of RF signals in the frequency domain. Input signal
amplitude is plotted on the CRT as a function of frequency.
The HP Model 8565A is designed for simplicity of operation.
Most measurements can be made using only three controls once
the green Normal Settings have been preset. The Model 8565A
has absolute amplitude and frequency calibration from 10 MHz
to 22 GHz. The frequency span, bandwidth, and video Filter
are all coupled with automatic sweep to maintain a
calibrated display and simplify operation of the Analyzer.
Internal preselection eliminates most spurious responses to
simplify signal identification. The preselector also extends
dynamic range of the Analyzer as well as provides some
protection for the input mixer.
All major spectrum Analyzer parameters are displayed on the
CRT bezel readout. The frequency range of the HP Model 8565A
is 10 MHz to 22 GHz in direct coaxial input and 14.5 to 40
GHz when used with the HP Model 11517A External Mixer.
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
424
Größe:
230.04 Mbytes (241210238 Bytes)
Sprache:
english
Revision:
Dokument-ID:
08565-90001
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
2013 11 24
MD5:
47ddab95f1ee5d8e55b8223864a3a84d
Downloads:
2116
Information
This manual applies directly to HP Model 8565A Spectrum
Analyzer having serial prefix number 1712A.
For additional important information about serial numbers
see INSTRUMENTS COVERED BY MANUAL in Section I.
This Operating and Service Manual contains information
required to install, operate, test, adjust, and service the
Hewlett-Packard Model 8565A, Figure 1-1 shows the instrument
and Accessories supplied. This section covers instrument
identification, description, options, Accessories,
specifications, and other basic information.
This manual is divided into eight sections which provide
information as follows:
a. SECTION I, GENERAL INFORMATION, contains the instrument
description and specifications as well as the accessory and
recommended test equipment list.
b. SECTION II, INSTALLATION, contains information relative
to receiving inspection, preparation for use, mounting,
packing, and shipping.
c. SECTION III, OPERATION, contains instructions for
operating the instrument.
d. SECTION IV, PERFORMANCE TESTS, contains information
required to verify that instrument performance is in
accordance with published specifications.
e. SECTION V, ADJUSTMENTS, contains information required to
properly adjust and align the instrument after repair.
f. SECTION VI, REPLACEABLE PARTS, contains information
required to order all parts and assemblies.
g. SECTION VII, MANUAL BACKDATING CHANGES, contains
backdating information to make this manual compatible with
earlier equipment configurations.
h. SECTION VIII, SERVICE, contains descriptions of the
circuits, schematic diagrams, parts location diagrams, and
troubleshooting procedure to aid the user in maintaining the
instrument.