Geräte Informationen:

Hewlett Packard 8656A Generator
Hersteller:
Hewlett Packard
Modell: 8656A
Datum: 1981
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: Signal Generator
Informationen:
                                    The Hewlett-Packard Model 8656A is a synthesized signal
generator with a carrier frequency range of 100 kHz to 990
MHz. Its output amplitude is leveled and calibrated from +13
to -127 dBm. AM and/or FM functions can be individually
selected. The carrier frequency, output amplitude, and
modulation functions can be remotely programmed via the
Hewlett-Packard Interface Bus. The unique modular design and
incorporated service features permit rapid and easy
calibration and service.

Folgende Anleitungen sind hier verfügbar:

Hewlett Packard -- 8656A -- Service- und Bedienungsanleitung
Dateiname: HewlettPackard-4915-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 557
Dateigröße: 41.40 Mbytes (43413053 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 08656-90107
Datum: Mai 1981
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: dd491d95b8ca282105f87f6ea63cf08d
Downloads: 199 seit dem 24 November 2013
Informationen:
This manual applies directly to instruments with serial
numbers prefixed 2035A.

With changes described in Section VII, this manual also
applies to instruments with serial numbers prefixed 2032A,
2027A, 2026A, 2025A, 2024A, 2023A, 2022A, 2018A, 2014A, and
2009A.

For additional important information about serial numbers,
see INSTRUMENTS COVERED BY MANUAL in Section I.

This section of the manual describes the instruments
documented by this manual and covers instrument description,
options, accessories, specifications, and other basic
information. The other sections contain the following
information:

Section II, Installation: provides information about initial
inspection, preparation for use (including time base
selection and HP-IB address selection for remote operation),
and storage and shipment.

Section III, Operation: provides information about panel
features and includes operator’s checks, operating
instructions for both local and remote operation, and
operator’s maintenance information.

Section IV, Performance Tests: provides the information
required to check performance of the instrument against the
critical specifications listed in Table 1-1.

Section V, Adjustments: provides the information required to
properly adjust the instrument.

Section VI, Replaceable Parts: provides ordering information
for all replaceable parts and assemblies.

Section VII, Manual Changes: with the backdating
information, this manual applies to all instruments as
indicated on the title page.

Section VIII, Service: provides the information required to
repair the instrument.
HewlettPackard-4915-Manual-Page-1-Picture
Kostenlos herunterladen


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the word table backwards.
Powered by Commentics