Geräte Informationen:

Thurlby Thandar Instruments TTI TG2000 Generator
Thurlby Thandar Instruments TTI
Modell: TG2000
Datum: 2010
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: DDS Function Generator
                                    This manual is for both the TG2000 and TG1000 function generators. The TG1000 has a
maximum frequency of 10MHz and no remote control capability but is otherwise functionally the
same as the TG2000 20MHz generator. Wherever there are differences in the specification or
operation, the limits for the TG1000 are shown in square brackets [ ] after the TG2000 limits.
This function generator uses direct digital synthesis to provide high performance and extensive
facilities at a breakthrough price. It can generate a variety of waveforms between 1mHz and
20MHz [10MHz] with a resolution of 6 digits and an accuracy better than 10ppm.

Direct digital synthesis for accuracy & stability
Direct digital synthesis (DDS) is a technique for generating waveforms digitally using a phase
accumulator, a look-up table and a DAC. The accuracy and stability of the resulting waveforms is
related to that of the crystal master clock.
The DDS generator offers not only exceptional accuracy and stability but also high spectral purity,
low phase noise and excellent frequency agility.

A wide range of waveforms
High quality sine, square and pulse waveforms can be generated over the full frequency range of
1mHz to 20MHz [10MHz].
Triangle waveforms can also be generated but with limitations as to the maximum usable
Variable symmetry/duty-cycle is available for squarewave and pulse waveforms.

All waveforms can be swept from 0.2Hz to their maximum frequency in a single sweep at a rate
variable between 50 milliseconds and 999 seconds. The sweep is fully phase continuous.
Sweep can be linear or logarithmic, single or continuous. Single sweeps can be triggered from
the front panel, the trigger input, or the digital interfaces. A sweep marker is provided.

External Amplitude Modulation is available for all waveforms.

FSK and Tone modes
Frequency Shift Keying provides phase coherent switching between two selected frequencies; in
Tone mode the output is stepped asynchronously through a user-defined list of up to 16
frequencies. In both modes the switching source can be the internal trigger generator, front panel,
an external signal or a remote command.

Easy and convenient to use
All of the main generator parameters are clearly displayed together on a backlit LCD with 4 rows
of 20 characters. Sub menus are used to set the parameters for each function.
All parameters can be entered directly from the numeric keypad. Alternatively most parameters
can be incremented or decremented using the rotary encoder.
This system combines quick numeric data entry with quasi-analogue adjustment when required.

Fully programmable via USB and Addressable RS-232 (TG2000 only)
The generator has both USB and RS-232 interfaces which can be used for remote control of all of
the instrument functions.
As well as operating in conventional single instrument mode the RS-232 serial interface can also
be used in addressable mode whereby up to 32 units can be linked to a single PC serial port.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Thurlby Thandar Instruments TTI -- TG2000 -- Bedienungsanleitung
Dateiname: Thurlby-4728-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 46
Dateigröße: 1.12 Mbytes (1179567 Bytes)
Sprache: Englisch
Revision: Issue 6
Dokument-ID/Nummer: 48591-1020
Datum: 2010
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: f2fc98beedd0dfa5a174082d550845d0
ed2kID: c83a5d22af68e468b9fdc36132e78ae1
Downloads: 143 seit 02 November 2013
Introduction 2
Specifications 3
Safety 6
Installation 9
Connections 10
Front Panel Connections 10
Rear Panel Connections 11
General 12
Initial Operation 12
Standard Waveform Operation 15
Setting Generator Parameters 15
AUX Output 18
Warnings and Error Messages 19
Sweep Operation 20
General 20
Setting Sweep Parameters 20
Gated Mode 25
Tone Mode 26
FSK 27
Modulation 28
System Operations from the Utility Menu 29
Calibration 31
Equipment Required 31
Calibration Procedure 31
Calibration Routine 32
Remote Calibration 33
Remote Operation 34
USB Interface 38
Remote Commands 39
Maintenance 42
Appendix 1. Warning and Error Messages 43
Appendix 2. Factory System Defaults 44
Kostenlos herunterladen


Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
Type the numbers for four hundred seventy-two.
Die Antwort lautet:
Informiere mich via E-Mail über neue Kommentare.
Meine Daten auf diesem Computer.
Powered by Commentics