Geräte Informationen:

IOTech Digital488 Interface
Modell: Digital488
Datum: 1990
Kategorie: Messgeräte
Gruppe: Interface
Beschreibung: IEEE 488 to Digital I/O Interface
                                    The Digital488 is a digital input and output interface to
the IEEE 488 bus. Each unit has 40 TTL level digital I/O
lines, which are divided, into 5 eight-bit ports. Each
port is software programmable as input or output. The
Digital488 has several features, which give it versatile
interface capability. A trigger output signal is asserted
on the Group Execute Trigger (GET) command. Edge-triggered
inputs can generate a Service Request on the bus. Six
data formats are software programmable, including ASCII
hexadecimal, ASCII character, ASCII binary, binary, high
speed binary and ASCII decimal. There are also individual
bit set and bit clear commands. Programmable terminators
are provided to facilitate interfacing to various

Folgende Anleitungen sind hier verfügbar:

Dokumenttyp: Bedienungsanleitung IOTech-4594-Manual-Page-1-Picture
Seitenanzahl: 62
Dateigröße: 2.00 Mbytes (2099424 Bytes)
Sprache: Englisch
Revision: 6.0
Dokument-ID/Nummer: 110-0901 and/or 916895
Datum: 1990
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: c5062291f638e962debb84dc404fc236
Downloads: 261 seit dem 13 Juli 2013

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics