Geräte Informationen:

Tektronix SG 5030 Generator
Hersteller:
Tektronix
Modell: SG 5030
Datum: 1990
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: Programmable Leveled Sine Wave Generator
Informationen:
                                    The SG 5030 Programmable Leveled Sine Wave Generator
is a GPIB programmable TM 5000-series plug-in instrument
designed to provide a low-distortion sinusoidal waveform
with leveled output amplitude. Frequency, amplitude,
and the front-panel store/recall parameters are fully
programmable. Parameter values are displayed by 8 seven-segment
LEDs in the display window. The SG 5030 output amplitude
is programmable from 4.5mV to 5.5V peak-to-peak into 50Q,
and has a frequency range of 0.1 Hz to 550MHz with a
reference frequency of 50kHz. Additional connectors
provide timebase input and output reference signals
to external sources.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Tektronix -- SG 5030 -- Bedienungsanleitung
Dateiname: Tektronix-4516-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 98
Dateigröße: 11.07 Mbytes (11608603 Bytes)
Sprache: Englisch
Revision: Revised
Dokument-ID/Nummer: 070-7705-01
Datum: Januar 1992
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: ef371cb709455ec02237b53c1d54de76
ed2kID: dff3e12461b646d67297f8b5146c35d5
Downloads: 598 seit 27 April 2013
Informationen:
Table of Contents

Operator Safety Summary .............................v

Section 1 Specifications............................1-1

Introduction...................................1-1

Instrument Description...................... ........1-1

Electrical Characteristics.............................1-2

Section 2 Operating Instructions .......................2-1

Preparation For Use..............................2-1

Front Panel Controls, Connectors And Display.................2-2

Operators Familiarization.............................2-6

Power-Up Sequence.............................2-6

Function and Parameter Selection .......................2-6

Making Bandpass Measurements.......................2-10
Tektronix-4516-Manual-Page-1-Picture
Kostenlos herunterladen


Tektronix -- SG 5030 -- Service- und Bedienungsanleitung
Dateiname: Tektronix-4517-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 223
Dateigröße: 17.66 Mbytes (18521479 Bytes)
Sprache: Englisch
Revision: Revised
Dokument-ID/Nummer: 070-7703-01
Datum: März 1992
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 747805af4504b9ce57562e4b96b7d2e1
ed2kID: b047c244ebf6b22107439ddf144c97bb
Downloads: 614 seit 28 April 2013
Informationen:
Table of Contents

Operator Safety Summary . . . .........................vii

Service Safety Summary..............................viii

Section 1 Specifications............................1-1

Introduction...................................1-1

Instrument Description..............................1-1

Electrical Characteristics.............................1-2

Section 2 Operating instructions .......................2-1

Preparation For Use.............................2-1

Front Panel Controls, Connectors and Display.................2-2

Operator Familiarization .............................2-6

Power-Up Sequence.............................2-6

Function and Parameter Selection.......................2-6

Making Bandpass Measurements.......................2-10
Section 3 Programming............................3-1

Introduction...................................3-1

IEEE-488 Interface Function Subsets .....................3-1

Commands...................................3-2

Command Summary.............................3-3

Messages and Communication Protocol......................3-16

Message Protocol..............................3-17

Instrument Responses to IEEE-488 Interface Messages.............3-18

Remote-Local Operation ...........................3-18

Status And Error Reporting..........................3-19

Error Messages Sent To The Front Panel ...................3-20

Bus Error/Event Codes And Serial Poll Response ...............3-21

Power-on Sequences And Settings ......................3-21

Programming Examples .............................3-24

WARNING I

The remaining portion of this Table of Contents liste information that may expose personnel to hazardous voltages. The information listed in the remaining sections of this manual is for qualified personnel only.

Section 4 Theory of Operation ........................4-1

Introduction...................................4-1

SG 5030 Overview..............................4-1

Block Diagram Description............................4-2

Circuit Theory Notes...............................4-3

Detailed Circuit Description............................4-4
Section 5 Performance Check.........................5-1

Introduction...................................5-1

Test Equipment Required ............................5-1

Preparation...................................5-4

1.	Check Frequency Accuracy ........................5-4

2.	Check Spectral Purity...........................5-6

3.	Check Amplitude Accuracy.........................5-9

4.	Check Amplitude Flatness.........................5-11

5.	Check Output VSWR ...........................5-17

Section 6 Adjustment Procedure .......................6-1

Introduction...................................6-1

1.	Preparation................................6-1

2.	Adjust Output Hybrid Bias .........................6-2

3.	Adjust Internal Timebase Frequency ....................6-4

4.	Set Offset and Gain Cal Constants.....................6-5
Section 7

Maintenance ............................7-1

Introduction...................................7-1

General Maintenance ..............................7-1

Loss of NVRAM...............................7-1

Troubleshooting Aids.............................7-1

Output Hybrid Bias Setup ..........................7-5

Cleaning ..................................7-5

Obtaining Replacement Parts...........................7-7

Diagnostics...................................7-8

1.	Self Tests ................................7-9

2.	Operational Errors.............................7-11

Removal Instructions...............................7-12

Cabinet Side, Top, and Rear Panel Removal..................7-12

Circuit Board Removal............................7-12

Section 8

Options...............................8-1

Section 9

Replaceable Parts Lists.......................9-1

Parts Ordering Information ..........................9-1

Parts List Entry Description..........................9-1

Cross Index - Mfr. Code Number to Manufacturer .................9-2

Replaceable Electrical Parts ...........................9-5

Replaceable Mechanical Parts ..........................9-33

Accessories...................................9-35

Standard Accessories ............................9-35

Optional Accessories.............................9-35

Section 10

DIAGRAMS AND CIRCUIT BOARD ILLUSTRATIONS ........10-1
Tektronix-4517-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Which word in this sentence is bold?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics