LeCroy 7242B Oszilloskop
Hersteller:
Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
LeCroy 7242B hast,
kannst du die Dateien hier hochladen .
Modell:
7242B
Datum:
1994
Kategorie:
Gruppe:
Beschreibung:
Plug-In
Information
7242B Plug-In for the 7200 series Modular Oscilloscope System
General
The LeCroy 7242B
2 channel Plug-In is a high bandwidth,
long record length Plug-In for the LeCroy 7200 Series
Modular Oscilloscope System. With a second 7242B Plug-In,
the 7200 series provides 4 channels of simultaneous
1 GS/s digitizing.
The two input channels have flexible signal conditioning
allowing the user to select 50Ω or 1MΩ input impedance
with input sensitivities of 5 mV/div to 2.5 V/div.
The 7242B records 200,000 sample points on each input
channel (1,000,000/channel optional). These long memories
maintain full sample rate and usable bandwidth over
a wide range of timebase settings.
By segmenting the memory, up to 4000 waveforms/channel
can be acquired at high trigger rates.
Smart Trigger lets the user trigger on complex
waveforms like glitches or bit streams, so rare
or subtle events can be observed.
Dokumenttyp:
Serviceanleitung
Seiten:
313
Größe:
133.61 Mbytes (140096737 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
2013 01 26
MD5:
049c43f02bb69f23d46683dd907a32c2
Downloads:
2956
Information
This service manual contains information to maintain
the LeCroy 7242 Series Plugin for the 7200 Series
Modular Digital Oscilloscope. The manual is divided
into eight sections as follows:
1. General Information
Contains the 7242 description, specifications, and
characteristics.
2. Performance Verification
Contains the performance tests necessary to verify
instrument specifications, including recommended
test equipment and test record form.
3. Adjustments / Calibration
Contains the necessary procedures to adjust the instrument
after servicing.
4. Basic Operation / Block Diagrams
Contains operation descriptions and block diagrams
for the instrument.
5. Disassembly
Contains the disassembly and assembly procedures.
6. Troubleshooting
Contains troubleshooting flowcharts to assist in the
repair of the instrument.
7. Schematics I Reference Diagrams
Contains schematics and component location diagrams.
8. Parts List
Contains Replaceable and Full parts lists.