Mitsubishi WT-A42 Fernseher
Hersteller:
Kein Bild verfügbar!
Vielleicht kannst du ein Bild für
Mitsubishi WT-A42
hochladen ?
Wenn du andere Handbücher für ein
Mitsubishi WT-A42 hast,
kannst du die Dateien hier hochladen .
Modell:
WT-A42
Datum:
2002
Kategorie:
Gruppe:
Beschreibung:
PROJECTION TELEVISION
Dokumenttyp:
Serviceanleitung
Seiten:
60
Größe:
1.01 Mbytes (1059384 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2009 01 24
MD5:
994c03c49fe84f3c3e923f8d9e7bcd96
Downloads:
2785
Information
This service manual provides service instructions for PTV Models WT-42311and WT-A42 using the VK20 chassis.
Service personnel should read this manual thoroughly before servicing this chassis.
This service manual includes:
1. Assembly and disassembly instructions for the front and rear cabinet Components.
2. Servicing of the Lenticular Screen and Fresnel Lens.
3. Servicing printed circuit boards (PCBs).
4. CRT replacement procedure.
5. Electrical adjustments.
6. Chip parts replacement procedures.
7. Circuit path diagrams.
The parts list section of this service manual includes:
1. Cabinet and screen parts.
2. Electrical parts.
Schematic and block diagrams of the above listed models are included in this service manual for better under-
standing of the circuitry. PCB drawings are also included for easy location of parts and test points.
Dokumenttyp:
Serviceanleitung
Seiten:
15
Größe:
3.59 Mbytes (3759901 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2009 01 24
MD5:
aa4a5dfd5323966e09067d6d092f9089
Downloads:
2144
Information
PART 2
SCHEMATIC DIAGRAMS
Overall PCB Block Diagram ... 1
PCB-MAIN ... 2
PCB-POWER ... 3
PCB-TERMINAL (Input Switch) ... 4
PCB-TERMINAL (3DYC / Decoders) ... 5
PCB-SIGNAL-1 (AV I/O) ... 6
PCB-SIGNAL-2 (MICRO) ... 7
PCB-SIGNAL-3 (VCJ) ... 8
PCB-SIGNAL-4 (Convergence Generator) ... 9
PCBs - CONTROL / CRTs / DBF / PREAMP / SVM / UNI ... 10
PCB-DOUBLER-1 (Input) ... 11
PCB-DOUBLER-2 (Main) ... 12
PCB-DOUBLER-3 (Output) ... 13