Fluke Y5020 Netzteil
Hersteller:
Modell:
Y5020
Datum:
1979
Kategorie:
Gruppe:
Beschreibung:
Current Shunt

Information

INTRODUCTION The Model Y5020 is a precision, four-terminal, current shunt designed for use in calibrating ac/dc current sources in the range of 0 to 20 amps, do to 5 kHz. The shunt is housed in a forced-air cooled, PTI (Portable Test Instrument) case. This case is compatible with all instruments in the Fluke PTI product line and can be stacked with other PTI products to form a portable test system. Forced-air cooling is accomplished by a fan mounted on the rear panel. Air is pulled in through the fan, passed over the shunt, and exhausted through the rear panel. Power for the fan is derived from the power line. Two voltage configurations are available, 115 or 230V ac ±10%, 50 to 60 Hz. Four front panel terminals provide electrical access to the shunt; two are current input terminals and two are voltage output (sense) terminals. When the shunt is connected into a circuit and operating at its maximum current limit (20 amps), the input connections and the shunt present a burden voltage of less than 0.25V dc.

mehr

Service- und Bedienungsanleitung
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
12
Größe:
11.37 Mbytes (11923325 Bytes)
Sprache:
english
Revision:
Dokument-ID:
516591
Datum:
1979 09 01
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2018 01 20
MD5:
5bd95d7958b9946a91d3e888feb4ca1e
Downloads:
867

Information

Instruction Manual

mehr