Combinova MFM 10 Level Meter
Hersteller:
Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
Combinova MFM 10 hast,
kannst du die Dateien hier hochladen .
Modell:
MFM 10
Datum:
Kategorie:
Gruppe:
Beschreibung:
Magnetic Field Meter
Information
The MFM 10 is a compact, reliable and environmentally
protected instrument to measure
low frequency magnetic fields. When detecting and measuring
magnetic fields it offers the following features:
»
Orthogonal coils, which means that fields can be measured
independent of field direction.
»
A frequency range of 10 to 1,000Hz for all low frequency
magnetic fields.
»
A wide dynamic range of 0.01 to 10,000μT with auto ranging,
ensuring that the instrument is set at the optimum
sensitivity for the detected field.
»
True RMS flux measurement, directional component and
dominant frequency indication.
»
Polarization detection and presentation.
For the operator in the field the designed portability of
the MFM 10 means that the instrument is entirely
self-contained. These features are:
»
Built-in rechargeable sealed lead batteries for portability
and additionally avoiding
Power supply interference.
»
A flexible measurement data logging facility, for up to 100
hours of measurements at
frequent intervals. The stored results can later be printed
out or transferred to a PC.
»
A complete set of accessories: transport case, tripod,
battery charger, communication cable and this operator’s manual.
»
Fiber optic Interface kit for communication and remote control.
The electronics in the instrument comprise analog
amplifiers, a micro computer with communication peripherals
and an alphanumerical LCD-display with back light. A
built-in clock
and calendar is used in the data logging measurement.
Dokumenttyp:
Bedienungsanleitung
Seiten:
64
Größe:
815.56 Kbytes (835134 Bytes)
Sprache:
english
Revision:
2A
Dokument-ID:
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2017 08 03
MD5:
e448af5d6f7dcfcea8f603add1d6f63e
Downloads:
593
Information
Section 1 - INTRODUCTION
Magnetic Fields in the Environment
The Instrument (Fig. 1.1)
Using the MFM 10
Combinova AB - The Company Behind the Product
Section 2 - UNPACKING AND INSPECTION
Unpacking
Inspection
Checking the Battery Voltage
Section 3 - OPERATING INSTRUCTIONS
General Operation
Measurement
Data Retrieve
Print
Check Mode
Parameters
Battery Charging
Section 4 - TECHNICAL DESCRIPTION
Antenna
Electronics
Measurement Principle
Printing with the MFM 10
Fiber Optic Remote Operation
Fiber Adapter 10
Section 5 - SPECIFICATIONS
Section 6 - ERROR CODES
Instrument Errors
Measurement Errors
Data Retrieve Errors
Print Errors