Tektronix 067-0587-02 Kalibrator
Hersteller:
Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
Tektronix 067-0587-02 hast,
kannst du die Dateien hier hochladen .
Modell:
067-0587-02
Datum:
1982
Kategorie:
Gruppe:
Beschreibung:
Calibration Fixture Signal Standardizer
Information
DESCRIPTION OF INSTRUMENT
The 067-0587-02 Signal Standardizer is a calibration aid for
all 7000-series mainframes. It will standardize all
mainframes to all 7-series Plug-In units, both vertical and
horizontal. Test functions permit calibration of deflection
factor, transient response, and gain of trigger channels.
Bandwidth measurements of mainframes alone can be made by
connecting a Frequency Standard to the AUX IN-CW IN
connector. The gain of the horizontal channel can be
calibrated by applying a signal from a time-mark Generator
to the AUX IN-CW IN connector with the TEST selector set to
AUX IN.
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
94
Größe:
6.51 Mbytes (6828813 Bytes)
Sprache:
english
Revision:
Dokument-ID:
070-2477-00
Datum:
1982 01 01
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2017 04 23
MD5:
23fc6545c9841c7833825fa29a70ba9c
Downloads:
617
Information
The Instruction Manual has eight sections that provide
operating and servicing information for the Signal
Standardizer, 067-0587-02, Sections 1 and 2 contain
information about operating the instrument, and sections 3
through 8 contain servicing information for use by qualified
service personnel. Schematic diagrams are located at the
rear of the manual and can be unfolded for reference while
reading other parts of the manual. The reference designators
and symbols used on the schematics are defined on the first
page of the Diagrams and Circuit Board Illustrations
section. Abbreviations used in the manual, except those in
the parts lists and schematics, comply with the American
National Standards Institute
Y1.1-1972 publication. The parts lists are computer
printouts and use computer-supplied abbreviations.