Geräte Informationen:

Fluke 701 Kalibrator
Hersteller:
Fluke
Modell: 701
Datum: 1994
Kategorie: Messgeräte
Gruppe: Kalibrator
Beschreibung: Documenting Process Calibrator
Informationen:
                                    Fluke 701 and 702 Documenting Process Calibrators (hereafter
referred to as the calibrator) are battery- powered,
hand-held instruments that measure and source electrical and
physical parameters. See Table
1. The calibrator lets you troubleshoot, calibrate, verify,
and document the calibration of process instruments. See the
back of this manual for complete specifications.
In addition to the functions in Table 1, the 701 and 702
calibrators have the following features:
· General features:
Analog display in measurement mode to make it easy to read
the input level when the input is unstable.
Display shows information in English, French, German,
Italian, or Spanish.
Thermocouple (TC) input/output jack that is connected to an
internal isothermal block with automatic reference-junction
temperature compensation. Or, you can manually enter an
external temperature reference.
Stores results for later review.
Logs up to 8,000 data points (Model 702 with PMLink software
only.)
PC interface for uploading/downloading procedures, lists,
and results using PMLink software (Model 702 only).
Automatic calibration procedures for transmitters using
split screen MEASURE/SOURCE mode. Once you select the test
parameters, you can select an automatic procedure or you can
execute the test points one at a time.
· Features available in MEASURE mode:
Damping (smoothing of the last several readings).
Display of measurements in engineering units or percent of
scale.
Data logging (Model 702 only).
• Features available in SOURCE mode:
An output ramp feature for testing limit switches. Trip
detect is either a 1V change or a continuity status change
(Open or Short) from one ramp increment to the next.
An output step feature in which you set the step size and
press up or down to step the output in engineering units or
percent of scale.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Fluke -- 701 -- Bedienungsanleitung
Dateiname: Fluke-7930-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 118
Dateigröße: 1.93 Mbytes (2023540 Bytes)
Sprache: Englisch
Revision: 4
Dokument-ID/Nummer:
Datum: März 1998
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 6a8e199486ad6845b4d958222ee85f1a
ed2kID: da3060e9b03fbfe7ae3290515ab5145b
Downloads: 10 seit 12 Juni 2016
Informationen:
Introduction...................................................................................................................1
Standard
Equipment...............................................................................................4
Safety
Information.......................................................................................................10
Getting Acquainted with Your
Calibrator..................................................................12
Input and Output
Jacks..........................................................................................12
Keys..........................................................................................................................14
Display......................................................................................................................17
Setting Up the
Calibrator............................................................................................17
Using the Strap and
Bail........................................................................................17
Charging the
Battery...............................................................................................20
Battery
Life...............................................................................................................21
Automatically Saving Battery
Life.........................................................................23
Using the Optional Battery
Eliminator..................................................................23
Selecting the Display
Language............................................................................24
Adjusting the Display
Contrast...............................................................................24
Setting Up the Date and Time
Display.................................................................24
Using the
Backlight.................................................................................................25
Personalizing the
Calibrator...................................................................................26
Using Measure
Mode..................................................................................................27
Measurement
Ranges............................................................................................27
Measuring Electrical
Parameters..........................................................................28
Testing
Continuity...................................................................................................30
Measuring
Pressure................................................................................................30
Measuring
Temperature........................................................................................33
Using
Thermocouples........................................................................................33
Using Resistance-Temperature Detectors
(RTDs)........................................36
Measurements in Percent of
Scale.......................................................................40
Damping Your
Measurements..............................................................................40
Using Source
Mode.....................................................................................................41
Sourcing Electrical
Parameters..............................................................................41
Simulating a 4 to 20 mA
Transmitter....................................................................43
Providing Loop
Power.............................................................................................45
Sourcing
Pressure..................................................................................................47
Simulating
Thermocouples....................................................................................50
Simulating
RTDs.....................................................................................................52
Sourcing in Percent of
Scale.................................................................................54
Stepping and Ramping the Output
Value...........................................................54
Stepping the
Output................................................................................................54
Ramping the
Output................................................................................................55
Simultaneous
Measure/Source.................................................................................59
Calibrating a Process
Instrument..............................................................................62
Generating “As Found” Test
Data.........................................................................62
Adjusting the
Transmitter.......................................................................................66
“As Left” Test
Run...................................................................................................67
Memory
Operations.....................................................................................................68
Saving
Results.........................................................................................................68
Reviewing
Memory..................................................................................................69
Data Logging (Model 702
Only)..........................................................................
70
Observing Min and Max
Measurements.............................................................72
Viewing the Task List (Model 702
Only)..............................................................72
Clearing
Memory.....................................................................................................73
Quick Guide to
Applications.......................................................................................73
Communicating with a PC (Model 702
Only)...........................................................83
Maintenance.................................................................................................................83
Replacing the Battery
Pack..................................................................................
83
Internal Lithium Backup
Battery..........................................................................
83
Cleaning the
Calibrator..........................................................................................83
Calibration
Data......................................................................................................84
Service Center Calibration or
Repair.................................................................
84
Replacement
Parts..................................................................................................84
Specifications.............................................................................................................
86
DC Voltage
Measurement......................................................................................87
AC Voltage
Measurement......................................................................................88
DC Current
Measurement......................................................................................89
Resistance
Measurement.......................................................................................89
Continuity
Testing....................................................................................................90
Frequency
Measurement........................................................................................90
DC Voltage
Output...................................................................................................91
DC Current
Output...................................................................................................92
Resistance
Sourcing................................................................................................93
Frequency
Sourcing.................................................................................................94
Temperature,
Thermocouples...............................................................................95
Temperature, Resistance Temperature
Detectors.............................................98
Loop Power
Supply..................................................................................................99
Top and Bottom Limits of Ranges with Auto Range
On....................................100
General
Specifications............................................................................................102
Index
Fluke-7930-Manual-Page-1-Picture
Kostenlos herunterladen


Fluke -- 701 -- Bedienungsanleitung
Dateiname: Fluke-7931-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 33
Dateigröße: 1,006.68 Kbytes (1030845 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: PN 942784
Datum: Juli 1994
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 144a3ab406802f21b2542c44ae38064b
ed2kID: cfe599178dce848ee68c1fef3c2965d9
Downloads: 12 seit 12 Juni 2016
Informationen:
Quick Reference Guide

Introduction
..................................................................................................1
Function Summary
...............................................................................1
Charging the Battery and Battery Life
.................................................2
Input and Output Jacks
........................................................................3
Keys
......................................................................................................4
Using Measure
Mode....................................................................................6
Measuring Electrical
Parameters..........................................................6
Measuring Pressure
.............................................................................7
Measuring Temperature
......................................................................8
Measurements in Percent of Scale
.....................................................10
Dampening Your Measurements
..........................................................10
Using Source Mode
.......................................................................................11
Sourcing Eiectricai Parameters
............................................................11
Generating a
Frequency........................................................................12
Simulating Thermocouples
..................................................................12
Simulating RTDs
...................................................................................13
Stepping the Output
.............................................................................13
Sourcing
Pressure.................................................................................14
Simultaneous Measure/Source Mode
.........................................................16
Calibrating a Process
Instrument................................................................18
Generating As Found Test Data
............................................................18
Adjusting the Transmitter
....................................................................21
Generating As Left Test
Data................................................................21
Memory
Operations....................................................................................22
Saving the Measure, Source, or Measure/Source
Results.................22
Review
Memory.....................................................................................23
Clearing
Memory...................................................................................24
Loop Power
.................................................................................................25
Using Setup
Mode........................................................................................26
Using the Battery Save Feature
...........................................................27
Using the Backlight Timeout
Feature...................................................27
Selecting the Display
Language..........................................................28
Selecting Date Format
...........................................................................28
Fluke-7931-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the day after Friday?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics