Geräte Informationen:

Fluke 633 Netzwerk Tester
Hersteller:
Fluke
Modell: 633
Datum: 1999
Kategorie: Messgeräte
Gruppe: Netzwerk Tester
Beschreibung: QuickCHECK-T1
Informationen:
                                    These units are compact, handheld, fully-featured T1 test
sets designed to thoroughly verify the performance parameter
of a T1 facility.
Design Highlights
The QuickBERT-T1 and QuickCHECK-T1 are designed to allow
users to easily analyze and correct the common problems
arising in T1 networks. Experienced and inexperienced users
alike can determine the integrity, configuration parameters,
and general performance of a T1 circuit when using these
units. Features include the following.
· Is handheld and battery powered
· Transmits all standard T1 bit error rate test (BERT)
patterns and loop codes (QuickBERT-T1 only)
· Transmits HDSL loop codes (QuickBERT-T1 only)
· Has the ability to insert logic, BPV, and frame bit errors
(QuickBERT-T1 only)
· Performs BERT and Fractional T1 BERT (Nx56 and Nx64)
· Captures and displays DTMF digits
· Measures DS1 frequency, level, and clock slips
· Displays standard T1 alarms
· Displays major T1 performance parameters
· Displays AMI or B8ZS line coding
· Measures DS0 level and frequency
· Monitors voice using internal speaker (or headset)
· Displays DS0 data and signaling bits
· Automatically synchronizes to and displays the T1 framing
type, line coding, and BERT pattern

Folgende Anleitungen sind für obiges Gerät verfügbar:

Fluke -- 633 -- Bedienungsanleitung
Dateiname: Fluke-7929-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 66
Dateigröße: 428.31 Kbytes (438593 Bytes)
Sprache: Englisch
Revision: 1
Dokument-ID/Nummer: PN 1278087
Datum: September 1999
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 631c427b660c6189cbebd54a38ebeca8
ed2kID: 5faf1ff4c439a2a4cfe19cf214691849
Downloads: 11 seit 12 Juni 2016
Informationen:
1
Introduction......................................................................................1-1
1-1.
Introduction........................................................................................1-1
1-2. Design
Highlights...............................................................................1-2
1-3. Safety
Information..............................................................................1-3
1-4. Software
Revision...............................................................................1-3
1-5. Self
Test...............................................................................................1-3
1-6. Supplied
Equipment............................................................................1-4
1-7. Toolpak Accessory
Kit.......................................................................1-5
1-8. View Angle
Adjustment.....................................................................1-6
1-9.
Accessories.........................................................................................1-6
1-10.
Cleaning...............................................................................................1-6
1-11.
Environmental.....................................................................................1-6
1-12.
Manual..................................................................................................1-6
2
Overview...........................................................................................2-1
2-1.
Introduction........................................................................................2-1
2-2.
Power...................................................................................................2-1
2-3. Primary And Reference T1
Receivers..............................................2-1
2-4. Controls
...............................................................................................2-2
2-5. ON/OFF
Switch..............................................................................2-2
2-6. RESULTS
Keys..............................................................................2-5
2-7. BPV Error/Frame
Err.................................................................2-5
2-8. CRC Error/Bit
Error...................................................................2-6
2-9. DS1 Freq/Clk
Slips....................................................................2-7
2-10. E-Bit
Sync...................................................................................2-8
2-11. DS1 Level (volts, peak-to-peak)/DS1 Level
(dBDSX).........2-8
2-12. DS0 Freq/DS0
Level..................................................................2-9
2-13. FT1 (Fractional
T1)....................................................................2-10
2-14.
DTMF.........................................................................................2-10
2-15. RESTART
Key...............................................................................2-11
2-16. TEST MODE
Key..........................................................................2-11
2-17. SIGNALING TYPE
Key...............................................................2-12
2-18. TX CLK SOURCE Key (QuickBERT-T1
only).........................2-12
2-19. LOOP CODE Key (QuickBERT-T1
only)..................................2-12
2-20.
CSU..............................................................................................2-14
2-21. NIU4,
NIU5................................................................................2-14
2-22.
NTWRK......................................................................................2-14
2-23.
LINE.............................................................................................2-14
2-24.
PYLD...........................................................................................2-14
2-25. ARM
(ADTRAN).......................................................................2-15
2-26. HTU-R
(ADTRAN)....................................................................2-15
2-27. HTU-C
(ADTRAN)....................................................................2-15
2-28. HRE1
(ADTRAN)......................................................................2-15
2-29. HRE2
(ADTRAN)......................................................................2-15
2-30. NREM
(PairGain).......................................................................2-15
2-31. NLOC
(PairGain).......................................................................2-15
2-32. NDU1
(PairGain)........................................................................2-15
2-33. NDU2
(PairGain)........................................................................2-15
2-34. CREM
(PairGain).......................................................................2-16
2-35. CLOC
(PairGain)........................................................................2-16
2-36. CDU1
(PairGain)........................................................................2-16
2-37. CDU2
(PairGain)........................................................................2-16
2-38. FT1 CHANNEL SELECT
Key......................................................2-16
2-39. CHANNEL UP/DOWN
Keys........................................................2-16
2-40. ERROR INJECT Keys (QuickBERT-T1
only)...........................2-17
2-41. SEND LOOP UP/DOWN Keys (QuickBERT-T 1
only).............2-17
2-42. RX INPUT
Key...............................................................................2-17
2-43. TX PATTERN Key (QuickBERT-T1
only)................................2-18
2-44.
QRSS............................................................................................2-18
2-45. 1 IN
7............................................................................................2-19
2-46. 2 IN
8............................................................................................2-19
2-47. 3 IN
24..........................................................................................2-19
2-48. ALL 0'S
........................................................................................2-19
2-49. ALL 1'S
........................................................................................2-19
2-50.
1:1.................................................................................................2-19
2-51.
NET55..........................................................................................2-19
2-52.
OCT55..........................................................................................2-20
2-53.
DALY55......................................................................................2-20
2-54.
USER............................................................................................2-20
2-55.
THRU...........................................................................................2-21
2-56. TX LINE CODE Key (QuickBERT-T1
only).............................2-21
2-57. TX FRAME Key (QuickBERT-T1
only).....................................2-22
2-58. Volume
Control...............................................................................2-22
2-59.
Indicators..............................................................................................2-22
2-60. Errors
LEDs.....................................................................................2-22
2-61. Data Bits
LEDs................................................................................2-22
2-62. Signaling Bits
LEDs.......................................................................2-23
2-63. Rx Status/History
LEDs.................................................................2-23
2-64. AMI and B8ZS/HISTORY
LEDs.............................................2-23
2-65. SIGNAL PRESENT/HISTORY
LEDs.....................................2-24
2-66. OUT OF FRAME/HISTORY
LEDs.........................................2-24
2-67. BLUE ALARM (AIS)/HISTORY
LEDs.................................2-24
2-68. ONES DENSITY/HISTORY
LEDs.........................................2-25
2-69. EXCESS ZEROS/HISTORY
LEDs.........................................2-25
2-70. YELLOW ALARM/HISTORY
LEDs.................................... 2-26
2-71. DS1 IDLE SIGNAL/HISTORY
LEDs.................................... 2-26
2-72. PATTERN SYNC LOSS/HISTORY
LED............................. 2-26
2-73. Error Inject LEDs (QuickBERT-T1
only)................................... 2-27
2-74. Receive Loop Up/Down LEDs (QuickBERT-T1
only)............ 2-27
2-75. Send Loop Up/Down LEDs (QuickBERT-T1
only)................. 2-27
2-76. Rx Input
LEDs................................................................................2-27
2-77. Pattern
LEDs...................................................................................2-27
2-78. Tx Line Code LEDs (QuickBERT-T1
only)...............................2-28
2-79. Frame
LEDs....................................................................................2-28
2-80. Low Battery
LED............................................................................2-28
2-81. BATTERY SAFE
MODE..................................................................2-29
2-82. BATTERY
PACK...............................................................................2-29
3
Operation..........................................................................................3-1
3-1. Introduction
.........................................................................................3-1
3-2. Automatic
Evaluation........................................................................3-1
3-3. Framing
Evaluation........................................................................3-1
3-4. Pattern
Evaluation...........................................................................3-2
3-5. Line Code
Evaluation....................................................................3-2
3-6. Evaluating Live
Traffic......................................................................3-2
3-7. Capturing and Displaying DTMF
Digits..........................................3-6
3-8. Performing a BIT Error Rate Test (BERT)
(Quick BERT-T1
only)......................................................................3-7
3-9. Performing Fractional T1
BERT.......................................................3-9
3-10. Performing Clock-Slip
Measurements.............................................3-11
Appendices
A
Specifications.........................................................................................A-1
Index
Fluke-7929-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the third word of this sentence.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics