Geräte Informationen:

Fluke 2100A Thermometer
Hersteller:
Fluke
Modell: 2100A
Datum: 1975
Kategorie: Messgeräte
Gruppe: Thermometer
Beschreibung: DIGITAL THERMOMETER
Informationen:
                                    The Fluke Model 2100A is a digital, thermocouple
thermometer, employing the dual-slope integration technique,
and capable of making precise temperature measurements in
either degrees Fahrenheit (°F) or degrees Celsius (°C). The
instrument is fully guarded and features a fully isolated input.
1-3. The 2100A has a five-digit readout (plus sign) capable
of indicating up to ±3999.9 degrees. However, the range of
the instrument is determined by the type of thermocouple
used. The instrument can be ordered, configured to use any
of the following types: J, K, T, E, R and S. Table 1-1 shows
the temperature ranges for each of these types. Resolution
of the instrument is 0.1 degree, except in instruments using
a type R or a type S thermocouple and indicating in °F, when
resolution is 0.2 degrees. The readout features 0.5 inch
characters, fixed decimal point, and leading-zero
suppression for the two most significant digits.
1-4. The 2100A is available in three basic models: the
2100A—03, the 2100A-06, and the 2100A-10. The
2100A--03 is a single-point instrument (one input); the
2100A-10 is a multi-point instrument (10 inputs). Both of
these models are tailored at the factory to use only one
specific type of thermocouple. Once tailored, the 2100A—
03 and 2100A—10 are limited to that one type, but can be
converted to any one of the other five at any time, by means
of a conversion kit.
1-5. The 2100A—06 is a multi-type instrument. It is tailored
to accept inputs from any of the six different types of
thermocouple, but only one type at any given time.
(The 2100A—06 is not a multi-point instrument). In effect,
the 2100A—06 is a 2100A—03 that can be rapidly converted to
accept different thermocouples, by means of integral
selector switches, rather than conversion kits. For valid
indications from a 2100A—06, the selector switch depressed
must correspond to the type of thermocouple being used.
In addition, the 2100A—06 can accept linearized voltage
inputs on either of two selectable mV ranges directly from
other transducers, such as bridge-connected strain gauges.
Table 1-2 is a summary of the differences between the three
basic models of the 2100A.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Fluke -- 2100A -- Service- und Bedienungsanleitung
Dateiname: Fluke-7696-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 146
Dateigröße: 7.75 Mbytes (8127524 Bytes)
Sprache: Englisch
Revision: 1
Dokument-ID/Nummer: 397075
Datum: November 1975
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 50edd2d5d48aed533abf6d195b69e64e
ed2kID: 8ebcda22ee19e4d381509c33b4a522f7
Downloads: 49 seit 08 Februar 2016
Informationen:
1 INTRODUCTION AND
SPECIFICATIONS.............................................. 1-1
1-1.
INTRODUCTION...............................................................
14
1-14. SPECIFICATIONS
................................................................
1-3
2 OPERATING INSTRUCTIONS .
...................................................... 2-1
24.
INTRODUCTION...............................................................
2-1
2-3. SHIPPING
INFORMATION.................................................. 2-1
2-6. INPUT
POWER....................................................................
2-1
2-9. RACK/PANEL
INSTALLATION......................................... 2-1
2-11. OPERATING
FEATURES.................................................. 2-1
2-13. OPERATING
NOTES...........................................................
2-5
245. AC Line
Connection...........................................................
2-5
247. Fuse
Replacement...........................................................
2-5
2-19. Open
inputs....................................................................
2-5
2-21.
OPERATION........................................................................
2-5
2-22. Models 2100A—03 and 2100A—10 . .
........................ 2-5
2-24. Model
2100A-06...........................................................
2-6
2-26. Model 2100A/Model 2150A
Set......................................... 2-6
3 THEORY OF
OPERATION....................................................................
3-1
3-1.
INTRODUCTION...............................................................
3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION...................... . 3-1
3-5.
Thermocouple....................................................................
3-2
3-8. Cold Junction
Compensation............................................. 3-2
3-10. Buffer
Amplifier...............................................................
3-2
3-12. A/D
Converter...............................................................
3-2
3-16.
Linearizer........................................................................
3-3
3-19.
Display.............................................................................
3-3
3-21. CIRCUIT
ANALYSIS.........................................................
3-3
3-22. Reference Junction
Compensation.................................... 3-3
3-25. Buffer
Amplifier...............................................................
34
3-29. A/D Converter
................................................................
3-5
3-33.
Linearizer........................................................................
3-6
348. Summary of Linearizer
Operation.................................... 3-7
4 MAINTENANCE.
..................................................................................
4-1
4-1.
INTRODUCTION...............................................................
4-1
44. GENERAL
MAINTENANCE.................................................. 4-1
4-7.
Cleaning.............................................................................
4-2
4-9. Fuse
Replacement..................'.......................................
4-2
4-11. Service Tools
...................................................................
4-2
4-13. OPERATIONAL
EVALUATION......................................... 4-2
4-16.
CALIBRATION...................................................................
4-2
4-18. Power Supply
Adjustments............................................. 4-2
4-20. Zero Adjustment .
........................................................... 4-3
4-22. Equipment Preparation for
Calibration........................... 4-3
4-25. Comparator Adjustment (COMP
ADJ)................................ 4-5
4-27. Positive Full Scale Adjustment (POS
CAL)....................... 4-5
4-29. Negative Full Scale Adjustment (NEG CAL)
....................... 4-6
4-31. Linearized Gain
Check...................................................... 4-6
4-33. Open Input Detector Circuit
Check.................................... 4-7
4-35. Reference Junction
Calibration......................................... 4-7
440.
TROUBLESHOOTING...................................................
. 4-10
5 LISTS OF REPLACEABLE
PARTS........................................ 5-1
5-1. INTRODUCTION
................................................................
5-2
54. HOW TO OBTAIN
PARTS.................................................. 5-2
6 OPTIONS AND ACCESSORY INFORMATION
........................................ 6-1
6-1.
INTRODUCTION...............................................................
6-1
6-3. CARRYING CASE
(C81)...................................................... 6-1
6-5. FRONT PANEL COVER
(M03-203-700)................................ 6-1
6-7. INSTRUMENT MOUNTING
KITS......................................... 6-1
6-8.
Introduction....................................................................
6-1
6-10. Installation
Procedures......................................................
6-1
6-16. THERMOCOUPLE PROBES
.................................................. 64
6-19. THERMOCOUPLE TYPE CONVERSION KIT (2100A----K) 64
6-20.
Introduction....................................................................
64
6-22. Installation
.........................................................................
64
6-24. FAHRENHEIT TO CELSIUS CONVERSION KIT (F2CK) . . 64
6-25.
Introduction....................................................................
64
6-27.
Installation.......................................................................
64
6-29. MULTI-POINT SELECTOR SWITCH (2100A-10K) .... 6-5
6-30.
Introduction....................................................................
6-5
6-32.
Installation.......................................................................
6-5
6-34. OPTION -01 BATTERY
PACK............................................. 6-6
6-35.
introduction....................................................................
6-6
6-37. Option —01 Operation
....................................................... 6-6
643. Option—01 Theory of Operation
..................................... 6-6
645. Option —01
Installation..................................................
6-6
647. Option —01 Battery
Replacement.................................... 6-7
649. OPTION-02 DIGITAL OUTPUT
UNIT................................ 6-8
6-50.
Introduction....................................................................
6-8
6-52. Option —02
Specifications..................................................
6-8
6-54. Option —02
Operation......................................................
6-8
6-59. Option—02 Theory of
Operation.................................... 6-9
6-68. Option—02
Installation..................................................
6-11
6-70. ANALOG OUTPUT UNIT, OPTION
-04................................ 6-12
6-71.
Introduction....................................................................
6-12
6-75.
Specification....................................................................
6-12
6-77.
Installation....................................................................
6-12
6-79.
OPERATION........................................................................
6-13
6-81. Theory of
Operation......................................................
6-13
6-87. Calibration
....................................................................
6-15
6-89. 2150A MULTIPOINT SELECTOR SWITCH......................
6-17
6-90.
Introduction....................................................................
6-17
6-92. Connection for
Operation.................................................. 6-17
6-97. Operational
Evaluation......................................................
6-19
6-99.
Calibration........................................................................
6-19
7 GENERAL
INFORMATION....................................................................
7-1
8 SCHEMATIC
DIAGRAMS....................................................................
8-1
Fluke-7696-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the next number: 10, 12, 14, ..?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics