Geräte Informationen:

Icom IC-M600 Transceiver
Hersteller:
Icom
Modell: IC-M600
Datum: 1991
Kategorie: Funk und Kommunikation
Gruppe: Transceiver
Beschreibung: VHF MARINE TRANSCEIVER
Informationen:
                                    • One-touch emergency frequency access capability.
• Full 150 W* (PEP) of output power.
• Excellent frequency stability of ±20 Hz in the -30°C ~ +
60°C range.
• DDS (Direct Digital Synthesizer) system for a rapid lockup
time and high quality frequency oscillation.
• Convenient frequency selection via keyboard entry or
rotation of the main dial.
• Clarity control for up to ±150 Hz in 10 Hz steps.
• 99 user-programmable memory channels.
• 192 pre-programmed ITU channels and 282 new ITU channels
effective July 1991.
• Overload protection against open, shorted or mismatched
antenna connections and thermal overloads.
• General coverage receiver.
• Splash-resistant front panel.
• Keyboard and function display backlighting.
• Audio activated squelch.
• Noise blanker circuit.
• AGC (Automatic Gain Control) circuit.
•Accepts an optional AT-120 HF AUTOMATIC ANTENNA TUNER.
•Optional UT-62 ALARM UNIT for alarm signal transmission.
* For 25.0000~26.9999 MHz: More than 60 VV

Folgende Anleitungen sind für obiges Gerät verfügbar:

Icom -- IC-M600 -- Bedienungsanleitung
Dateiname: Icom-7499-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 28
Dateigröße: 2.66 Mbytes (2788182 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: A-5168H-1US
Datum: 1991
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 9d03e9839cf2cec009e97e8c38ace835
ed2kID: 033ff33ab95e7f489aa00f98e2acda71
Downloads: 31 seit 09 Januar 2016
Informationen:
FOREWORD..........................................
EXPLICIT DEFINITIONS.......................
IMPORTANT SAFETY PRECAUTIONS
FEATURES.............................................
TABLE OF CONTENTS..................................ii
UNPACKING.................................................... ii
1 PANEL DESCRIPTION............................... 1-4
- Switches and
controls...................................... 1—2
- Rear
panel.................................................................3
- Function
display.....................................................4
2 INSTALLATION..........................................5-8
- Mounting the
transceiver......................................5
- Rear panel
connections........................................6
- Installation
example...............................................7
- Ground
connections...............................................8
- Antenna
connections..............................................8
- Power
source...........................................................8
3 EXTERNAL EQUIPMENT
CONNECTIONS.......................................9-10
- AT-120 HF AUTOMATIC ANTENNA TUNER.... 9
- Internal setting for a non-lcom antenna
tuner............................................................................9
- MN-100, MN-100L ANTENNA MATCHERS .... 10
- OPC-302, OPC-303 ACC CABLES....................... 10
4 SELECTING A CHANNEL.....................11-12
- Direct selection of 2182 kHz.............................. 11
- Selecting a memory channel..................... 11—12
5 SETTING A FREQUENCY.................................. 13
- Setting a
frequency.............................................. 13
- Changing the frequency in 100 Hz steps........13
6 OPERATING RULES AND GUIDELINES . . . 14
7
RECEIVING.....................................................15-16
-
Receiving.........................................................
15—16
8
TRANSMITTING...................................................
17
-
Transmitting...........................................................
17
- Setting the transmit power................................ 17
9 MEMORY OPERATION...................................... 18
- Programming a frequency.................................. 18
- Changing the operating mode........................... 18
- Clearing memory information............................ 18
10 ALARM SIGNAL (OPTIONAL)......................... 19
- Transmitting an alarm signal on 2182 kHz___19
- Distress call
procedures......................................19
- Testing an alarm
signal...................................... 19
11 OPTIONAL UNIT INSTALLATION.................20
- UT-62 ALARM
UNIT................................................20
- ACC
cables.............................................................20
12
MAINTENANCE.....................................................21
- Replacing a
fuse...................................................21
-
Cleaning..................................................................21
13 TROUBLESHOOTING..........................................22
14
SPECIFICATIONS.................................................23
15
OPTIONS...................................................................24
Icom-7499-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Type the numbers for four hundred seventy-two.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics