Geräte Informationen:

Leader LS 1020 Oszilloskop
Hersteller:
Leader
Modell: LS 1020
Datum:
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: 20 MHz OSCILLOSCOPE
Informationen:
                                    The Model LS 1020 Dual-Trace Portable Oscilloscope with
6-inch rectangular, internal graticule CRT features a
bandwidth of DC to 20 MHz, maximum deflection factor of 0.5
mV/div (5MHz), and maximum sweep speed of 50 ns/div. Various
functions (e.g., TV sync separator, variable holdoff, X-Y
display mode) ailow this oscilloscope for educational use as
well as production line and service applications of TVs,
VTRs, and audio products.
* »
2.2 Features
• High-sensitivity of 0.5 mV/div
Enables measurement of low level signals (e.g., power supply
ripple, noise components).
• TV-V, TV-H trigger
Allows TV video signal observation. Stable display can be
obtained by selecting the vertical or horizontal sync signal
of the video signal regardless of the TIME/DIV switch setting.
• Variable holdoff
The variable holdoff time (from the sweep end to sweep
start) can display complex waveform stably.
• ALT trigger
Displays asynchronous waveforms stably.
• X-Y display
Offers X-Y oscilloscope capability: CH1 for X axis, CH2 for
Y axis.
• Scale illumination
Permits operating the oscilloscope in dark locations, or
photographing the screen.
• CH1 OUTPUT connector
Outputs buffered signal applied to the CH1 input connector.
Therefore, the oscilloscope can be used as a wideband,
high-sensitivity amplifier.

Folgende Anleitungen sind hier verfügbar:

Leader -- LS 1020 -- Bedienungsanleitung
Dateiname: Leader-6873-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 38
Dateigröße: 1.81 Mbytes (1901051 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum:
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: d3369328838e0073d4c6c0aa03454897
Downloads: 436 seit dem 11 Juni 2015
Informationen:
1.
INTRODUCTION....................................................................................1-1
*1.1 For Safety's
Sake................................................*...........................1-1
1.2 Operating
Precautions.....................................................................1-2
1.2.1 Line Voltage and
Fuse........................................................1-2
1.2.2 Maximum Allowable Input Voltage
*...................................1-2
1.2.3
Installation............................................................................1-3
1.2.4 CRT
Intensity..........................................................................1-3
2.
SPECIFICATIONS................................................................................2-1
2.1
Description......................................................................................2-1
2.2
Features...........................................................................................2-1
2.3
Specifications..................................................................................2-2
2.3.1 LS 1020
Oscilloscope..........................................................2-2
2.3.2 LP-051 Low Capacitance
Probe.........................................2-4
3. PANEL
DESCRIPTION...........................................................................3-1
3.1
Exterior.............................................................................................3-1
3.2 Front
Panel.......................................................................................3-2
3.2.1 Display
Block.......................................................................3-2
3.2.2 Vertical
Block.......................................................................3-3
3.2.3 Trigger
Block...........................................................................3-5
3.2.4 Sweep
Block...........................................................................3-7
3.3 Rear Panel
.......................................................................................3-8
4. BASIC OPERATING
PROCEDURES....................................................
. 4-1
4.1 Displaying
Trace..............................................................................4-1
4.2 Using the Low Capacitance
Probe....................................................4-2
4.2.1 Appearance and
Name........................................................4-2
4.2.2 Probe
Adjustment.........................................................
4-2
4.3 Connecting
Signal..............................................................................4-3
4.3.1 Direct
Connection.................................................................4-3
4.3.2 Using the Low Capacitance
Probe.....................................4-4
4.4 Single-Trace
Operation...................................................................4-5
4.5 Dual-Trace
Operation.....................................................................4-6
Leader-6873-Manual-Page-1-Picture
Kostenlos herunterladen


Comments (1)

 
Topic: Leader LS 1020
0/5 (0)
 
Gravatar
New
Александр
Gravatar
2
0
0
Oct 2017
First Poster
Спасибо за руководство!
Очень нужна схема.
 
Page 1 of 1
 
 
 

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics