Geräte Informationen:

Hewlett Packard 8754A Netzwerk Tester
Hersteller:
Hewlett Packard
Modell: 8754A
Datum: 1979
Kategorie: Messgeräte
Gruppe: Netzwerk Tester
Beschreibung:
Informationen:
                                    The HP Model 8754A Network Analyzer consists of an
internally leveled, 4- to 1300-MHz, swept source. Polar or
rectangular measurements are displayed on a cathode-ray tube
(CRT) through two independent channels. With appropriate
signal-routing accessories, the 8754A is a fully integrated
stimulus/response test system that measures magnitude and
phase characteristics of linear networks by comparing the
incident signal with the signal transmitted by the device
under test or reflected from its input.
1-20. The basic transmission measurements are
insertion loss or gain, insertion phase, and transmission
coefficient (S2i or Si2)· The basic reflection measurements
are return loss, from which SWR can be calculated, and
reflection coefficient (Sjj or S22X from which impedance can
be calculated or read from a Smith chart overlay.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Hewlett Packard -- 8754A -- Service- und Bedienungsanleitung
Dateiname: HewlettPackard-6820-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 627
Dateigröße: 26.60 Mbytes (27888395 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 08754-90015
Datum: Mai 1979
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 0c7e75523e267047fa5864f6c9a06569
ed2kID: 60a77680dcece2759027977a22d28ba6
Downloads: 72 seit 30 Mai 2015
Informationen:
This manual applies directly to instruments whose serial
number prefix is 1914A.

This Operating and Service Manual contains information
required to install, operate, test, adjust, and service the
Hewlett-Packard Model 8754A Network Analyzer. Figure 1-1
shows the instrument and accessories supplied. This section
covers instrument identification, description, options,
accessories, specifications, and other basic information.
1-3. This manual is divided into eight sections, which
provide the following information:
a. SECTION I, GENERAL INFORMATION, presents a brief
description of the instrument, specifications, and lists of
accessories and recommended test equipment.
b. SECTION II, INSTALLATION AND OPERATION VERIFICATION,
presents information relative to initial inspection,
preparation for use, mounting, packing, shipping, and
operation verification.
c. SECTION III, OPERATION, presents instructions for
operation of the instrument.
d. SECTION IV, PERFORMANCE TESTS, presents procedures
required to verify that performance of the instrument is in
accordance with published specifications.
e. SECTION V, ADJUSTMENTS, presents procedures required to
properly adjust and align the instrument after repair.
f. SECTION VI, REPLACEABLE PARTS, presents information
required to order all parts and assemblies.
g. SECTION VII, MANUAL BACKDATING CHANGES, presents
backdating information to make this manual compatible with
earlier shipment configurations.
h. SECTION VIII, SERVICE, presents circuit descriptions,
schematic diagrams, component location diagrams, and
troubleshooting procedures to aid the user in maintaining
the equipment.
HewlettPackard-6820-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the last letter of the word satellite.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics