Geräte Informationen:

Philips PM 3267U Oszilloskop
Hersteller:
Philips
Modell: PM 3267U
Datum: 1983
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: Portable Oscilloscope
Informationen:
                                    The portable oscilloscope PM3267U combines dual channel and
dual time-base facilities with an extensive bandwidth of 100MHz.
It enables signals with a sensitivity of 2mV/DfV to be measured.
A wide choice of display modes is available, for example:
single channel, two channels alternately or chopped, and two
channels added.
Both channels can be displayed with 'normal' polarity or
'inverted'.
An additional feature of the instrument is a third channel,
namely, TRIG VIEW, which enables a display of the main
time-base trigger signal.
In addition to the main time-base, the instrument also has a
delayed time-base facility.
With the alternate time-base mode selected, a simultaneous
display of the vertical input signal is possible on the main
and delayed time-base scales.
The instrument operates on ax. supply voltages of 120V, 220V
and 240V, and battery voltages of 20V ...
32V.
The features listed make the PM3267U suitable for a wide
range of measuring applications such as laboratory use,
field service, service-workshops and in education.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Philips -- PM 3267U -- Bedienungsanleitung
Dateiname: Philips-6723-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 56
Dateigröße: 1.57 Mbytes (1648484 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 9499 440 24101
Datum: 12 April 1983
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: f2a0c554240ab063bab8f42e7945712e
ed2kID: daae31f38fb012db260d25ec19bd2959
Downloads: 38 seit 18 Mai 2015
Informationen:
CONTENTS Page
SAFETY
0.1.
Introduction............................
0.2.
Safety precautions .................
0.3.
Caution and warning statements
0.4.
Symbols ...................................
0.5.
Impaired safety-protection . . .
1. GENERAL INFORMATION
1.1.
Introduction
........................................................................
........................................... 3
1.2.
Characteristics
....................................................................
............................................. 3
1.2.1.
Cathode ray tube ...................................
4
1.2.2.
Vertical or Y-axis
..............................................
4
1.2.3.
Trigger view
........................................................
. . . . ................................... 5
1.2.4.
Horizontal or X-axis........................
...................................
............................................. 6
1.2.5.
Triggering..............................................................................
............................................. 8
1.2.6.
Additional characteristics . .
,...............................................
............................................. 9
1.2.7.
Options
................................................................................
............................................. 10
1.2.9.
Environmental characteristics
..............................................
, . . ...................................... 11
1.3.
Accessories............................................................................
1.4.
Accessory information
...........................................................
.........., . ,........................... 13
1.5.
Principle of
operation...................................................
.......................................... 18
1.5.1.
Vertical deflection
................................................
. ....................................... 18
1.5.2.
Horizontal deflection
........................................................ .
........................................... 18
1.5.3.
CRT display
section............................................................
................................... 19
1.5.4.
Power
supply.........................................................................
.......................................... 19
2. INSTALLATION INSTRUCTIONS 20
2.1. initial inspection .
........................................................................................................
, , 20
2.2. Safety
instructions..........................................................................................................
20
2.2.1.
Earthing.........................................................................................................................20
2.2.2. Line voltage setting and
fuses..........................................................................................
20
2.3. Removing and fitting the front
cover..............................................................................
21
2.4. Operating position of the
instrument...............................................................................
21
2.5. Battery
operation..............................................................................................................
3. OPERATING INSTRUCTIONS
26
3.1. General
information.............................................................................................................26
3.2. Switching
on.........................................................................................................................26
3.3. Explanation of controls and
sockets....................................................................................27
3.3.1. CRT section
...............................................27
3.3.2. Vertical section
....................................................................................................................27
3.3.3. Horizontal section
................................................................................................................28
3.3.4. Main
time-base......................................................................................................................29
3.3.5. Delayed
time-base.................................................................................................................31
3.3.6. Rear-panel sockets
...............................................................................................................32
3.4. Detailed operating
information.........................................
................................................33
3.4.1. Preliminary control settings and
connections...................................................................33
3.4.2. Inputs A and B ...
................................................................................................................33
3.4.3. Triggering
...............................................................................................................................35
3.4.4. X
magnifier..........................................................................................................................37
3.4.5. The delayed time-base
.........................................................................................................38
3.4.6. The trigger view channel
....................................... . 38
4. BRIEF CHECKING PROCEDURE 40
4.1. Genera!
information..........................................................................................................40
4.2. Preliminary settings and connections
................................................................................40
4.2.1. Trace
rotation...................................................................................................................40
4.2.2. Use of
probes................................................................................
......................................41
4.2.3. Vertical channels .
...............................................................................................................41
4.2.4. Time-bases and triggering
....................................................................................................42
5. PREVENTIVE MAINTENANCE 43
5.1. General information
...........................................................................................................43
5.2. Cleaning the nextel suede coating
...............................................................··.......................43
5.3. Removing the bezel and contrast
plate..............................................................................43
5.4.
Recalibration......................................................................................................................44
Philips-6723-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the word hand backwards.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics