Geräte Informationen:

Philips PM 3267 Oszilloskop
Hersteller:
Philips
Modell: PM 3267
Datum: 1982
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: Portable Oscilloscope
Informationen:
                                    The portable oscilloscope PM3267 combines dual channel and
dual time-base facilities with an extensive bandwidth of 100MHz.
It enables signals with a sensitivity of 2mV/DIV to be measured.
A wide choice of display modes is available, for example:
single channel, two channels alternately or chopped, and two
channels added.
Both channels can be displayed with 'normal' polarity or
'inverted'.
An additional feature of the instrument is a third channel,
namely, TRIG VIEW, which enables a display of the main
time-base trigger signal.
!n addition to the main time-base, the instrument also has a
delayed time-base facility.
With the alternate time-base mode selected, a simultaneous
display of the vertical input signal is possible on the main
and delayed time-base scales.
The instrument operates on a.c. supply voltages of 110V,
220V and 240V, and battery voltages of 20V ... 32V.
The features listed make the PM3267 suitable for a wide
range of measuring applications such as laboratory use,
field service, service-workshops and in education.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Philips -- PM 3267 -- Bedienungsanleitung
Dateiname: Philips-6722-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 43
Dateigröße: 1.96 Mbytes (2051569 Bytes)
Sprache:
Revision:
Dokument-ID/Nummer: 9499 440 22801
Datum: November 1982
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: 4a575e611c57d6fe3681ec57bc46a30d
ed2kID: d99720472c039d8541fa473034c7135f
Downloads: 105 seit 18 Mai 2015
Informationen:
1. GENERAL INFORMATION 1
1.1.
Introduction...................................................................................................................1
1.2.
Characteristics................................................................................................................2
1.2.1. Cathode ray
tube............................................................................................................2
1.2.2. Vertical or
Y-axis.............................................................................................................2
1.2.3. Trigger view
.....................................................................................................................3
1.2.4. Horizontal or
X-axis......................................................................................................4
1.2.5.
Triggering.......................................................................................................................6
1.2.6. Additional characteristics
...............................................................................................7
1.2.7. Options
.........................................................................................................................8
1.2.8. Mechanical
data..............................................................................................................9
1.2.9. Environmental
characteristics..........................................................................................9
1.3. Accessories
.................................................................................................................10
1.3.1. Accessories supplied with the instrument
.....................................................................10
1.3.2. Optional accessories
......................................................................................................10
1.4. Accessory information
....................................................................................................11
1.5. Principle of operation
...................................................................................................16
1.5.1. Vertical deflection
........................................................................................................16
1.5.2. Horizontal deflection
...................................................................................................16
1.5.3. CRT display section
.....................................................................................................17
1.5.4. Power supply .
..................................................
............................................................17
2. INSTALLATION INSTRUCTIONS 18
2.1. Important safety
instructions........................................................................................18
2.2. Removing and fitting the front
cover..........................................................................18
2.3. Position of the
instrument............................................................................................18
2.4. Mains voltage settings and
fuses.....................................................................................18
2.5. External 24Volt D.C.
supply.........................................................................................19
2.6. Earthing
.........................................................................................................................19
3. OPERATING INSTRUCTIONS
24
3.1. General
information......................................................................................................24
3.2. Switching
on..................................................................................................................24
3.3. Explanation of controls and
sockets..............................................................................25
3.3.1. CRT section
...............................................................................
,...............................25
3.3.2. Vertical section
..................................................................................................
25
3.3.3. Horizontal section
............................................................. .........................................26
3.3.4. Main time-base
...............................................................................................................27
3.3.5. Delayed
time-base...................................................................................................
29
3.3.6. Rear-panel sockets
.............................................................................................
30
3.4. Detailed operating
information.....................................................................................31
3.4.1. Preliminary control settings and
connections................................................................31
3.4.2. Inputs A and
B..............................................................................................................31
3.4.3.
Triggering.....................................................................................................................33
3.4.4. X magnifier........................................
........................................................ 35
3.4.5. The delayed time-base
...............................................................................................
. 36
3.4.6. The trigger view channel
..............................................................................................36
4. BRIEF CHECKING PROCEDURE 38
4.1. General
information.................................................. ................................................38
4.2. Preliminary settings and connections
............................................................................38
4.2.1. Trace rotation
..............................................................................................................38
4.2.2. Use of probes
..................................................................................................................38
4.2.3. Vertical
channels........................................................
................................................39
4.2.4. Time-bases and
triggering..............................................................................................40
5. PREVENTIVE MAINTENANCE 41
5.1. General information
......................................................................................................41
5.2. Cleaning the nextel suede coating
...............................................................................41
5.3. Removing the bezel and contrast
plate.........................................................................41
5.4. Recalibration
...................................................................................
.............................42
Philips-6722-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Is it true or false that green is a number?
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics