Geräte Informationen:

Hitachi V-1085 Oszilloskop
Modell: V-1085
Kategorie: Messgeräte
Gruppe: Oszilloskop
                                    1. FEATURES__

The Hitachi portable read-out oscilloscope provides
measurement reliability and ease of operation by employing a
microprocessor. The major features are:

(1)	Measurement information display

The measurement information including the sweep speed, the
delay time, the UNCAL display, and the voltage sensitivity
of the vertical axis (Cursor Readout type only) is
alphanumerically displayed on the CRT.

Since troublesome setting operation procedures are
eliminated, an operator can concentrate on the displayed
data for measurement.

(2)	Measurement value display (Cursor Readout type only)

The distance between the two cursors displayed can read out
the following;

AV: Voltage between the reference cursor and the delta cursor

AT: Time between the reference cursor and the delta cursor

1/AT: Reciprocal of the time The displayed data eliminates
troublesome and time consuming calculation procedures.
Moreover, miscalculation of the scales is completely avoided.
(3)	Automatic time base range setting

At a press of the AUTO button, an optimum tune base range is
automatically set. (A signal period from 1.6 to 4 cycles
approx. is displayed.)

The time base range is automatically changed to a
corresponding change in input signal period.

(4)	Frequency counter (Cursor Readout type only)

The A TRIG signal frequency can be measured.

(5)	Trigger lock

Since complicated pulse train waveforms are hard to trigger
on, performing the trigger iock function enables sweep
independent triggering.

The “sweep time plus holdoff time” is fixed and a stable
trigger is obtained at any time range. ■

(6)	Channel input Quad channel input (V-1585, V-1085 only

Besides CHl and CH2, CH3 and CH4 provided with 0.5 V/

D1V and 0.1 V/D1V range selection capabilities are provided
for easy digital signal measurement.

(7)	Bandwidth

V-1585, V-1085, V-1565, V-1065A, V-1560, V-1060 DC-lOOMHz
(2mV/div: DC-20MHz)

V-G95, V-665A, V-660

DC-60MHz (2mV/div: DC-lOMHz)

(8)	High sensitivity

High sensitivity of 2 mV/div is provided.

(9)	Internal graticule

Internal graticule lines eliminate parallax-viewing error
between the trace and the graticule lines.

(10)	Delayed sweep

With delayed sweep, a portion of the signal can he magnified
for more accurate measurement and time comparison. The delay
time is digitally displayed on the CRT.

(11)	Auto trigger level

Auto measuring of trigger level is employed, so that trigger
level range is matched to the trigger signal for maximum
trigger sensitivity and stability.

(12)	TV triggering

Exclusive TV sync separator circuit technology provides
stable TV signal measurements on fields, frames and lines.

(13)	Memory backup (V-1585, V-1085 only)

The panel conditions are retained for more than 48 hours
after power off. Therefore, it is not necessary to perform
the panel settings when performing the same measurement the
day after tomorrow.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Hitachi -- V-1085 -- Bedienungsanleitung
Dateiname: Hitachi-6716-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 53
Dateigröße: 1.85 Mbytes (1940479 Bytes)
Sprache: Englisch
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: e7b2941c158d69c2ee8b8498ab70d08f
ed2kID: fbd297875c9ff90a43e3235baf57de0a
Downloads: 243 seit 14 Mai 2015
Kostenlos herunterladen


Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
What is the next number: 10, 12, 14, ..?
Die Antwort lautet:
Informiere mich via E-Mail über neue Kommentare.
Meine Daten auf diesem Computer.
Powered by Commentics