Geräte Informationen:

Tektronix TG501 Generator
Hersteller:
Tektronix
Modell: TG501
Datum: 1984
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: TIME MARK GENERATOR
Informationen:
                                    Description
The TG 501 is a general purpose Time Mark Generator plug-in
designed to operate in a TM 500 Series Power Module. A
Variable Timing Readout provides a simple but accurate means
of measuring timing errors over ±7.5% minimum range. Since
many specifications are given in percentages, the error
readout eliminates the need for computations and,
additionally, lessens parallax discrepancies.
waves are selected by self-canceling push-buttons when the
rotary switch is in the 521 n position.
All outputs are available at the front-panel connectors, or
by modification at the interface connector, located at the
back of the plug-in, and the TM 500 Series Power Module.
Marker selection from 5 s through 1 ns in a 1, 2, 5,
sequence is available. 5 s through 10 ns markers are
selected by a rotary switch. 5, 2, and 2 ns modified sine
Power supplies are current limited. The 5 V supply is
over-voltage protected to avoid damage to the integrated
circuits.

Folgende Anleitungen sind hier verfügbar:

Tektronix -- TG501 -- Service- und Bedienungsanleitung
Dateiname: Tektronix-6483-Manual-Page-1-Picture
Dokumenttyp: Service- und Bedienungsanleitung
Seitenanzahl: 86
Dateigröße: 29.64 Mbytes (31083730 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 070-1576-02
Datum: Februar 1984
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: e9286ce3c0a2624430b46c6aab6566b7
Downloads: 115 seit dem 28 November 2014
Informationen:
LIST OF ILLUSTRATIONS ii
Section 1
Specification.......................................................................................................
1-1
Section 2 Operating Instructions
......................................................................................
2-1
JßfARNIN^J
THE FOLLOWING SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED
PERSONNEL ONLY. TO AVOID PERSONAL INJURY, DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
Section 3 Theory of
Operation...........................................................................................
3-1
Section 4 Calibration
Procedure........................................................................................
4-1
Performance
Check......................................................................................
4-1
Adjustment Procedure
.................................................................................
4-5
Section 5
Maintenance..........................................................................................................5-1
Section 6
Options...................................................................................................................6-1
Section 7 Replaceable Electrical Parts
...............................................................................7-1
Section 8 Diagrams and
Illustrations....................................................................................8-1
Section 9 Replaceable Mechanical
Parts.............................................................................9-1
Tektronix-6483-Manual-Page-1-Picture
Kostenlos herunterladen


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
What is the opposite word of weak?
Powered by Commentics