Geräte Informationen:

Tektronix TDS 654C Oszilloskop
Modell: TDS 654C
Datum: 1999
Kategorie: Messgeräte
Gruppe: Oszilloskop
Beschreibung: Digital Real-Time™ Oscilloscopes
                                    Whether you are working on
next generation microprocessor
designs, high-speed data
communications equipment,
or in high-energy physics
research, the TDS 694C captures
your fastest signals with
the best fidelity and resolution
available. Its 3 GHz
bandwidth preserves your
waveform’s fast rising edges
and accurately shows signal
details. With 10 GS/s digitizing
rate simultaneously on all
four channels and a high-stability
timebase, the TDS 694C
makes your critical timing
measurements with the highest
resolution and accuracy
– even channel-to-channel
measurements made in a single
The TDS 600C oscilloscopes
incorporate all the advanced
trigger features you expect in
a high performance oscilloscope.
The TDS 694C can be
configured for cross triggering
with a Tektronix TLA 700
Logic Analyzer.
The TDS 600C oscilloscopes
give you the total solution to
your digital design characterization
and debugging needs.
Now you have the tool you
need to verify design margins,
characterize setup and
hold times, and measure
clock-to-data skew on the
fastest digital designs.
The TDS 600C offers 29 automatic
measurements, with
measurement statistics, to
make your design verification
and characterization job
much faster and easier.
Available Java-based application
packages for Jitter Analysis,
Disk Drive measurements
and Processor Specification
measurements provide customized
measurements and
analysis capability. The
TDS 600C gives you the performance
and features you
need to get your job done
faster and more thoroughly.

Folgende Anleitungen sind hier verfügbar:

Tektronix -- TDS 654C -- Datenblatt
Dateiname: Tektronix-6463-Manual-Page-1-Picture
Dokumenttyp: Datenblatt
Seitenanzahl: 4
Dateigröße: 825.54 Kbytes (845349 Bytes)
Sprache: Englisch
Dokument-ID/Nummer: 55W-10066-7
Datum: Mai 1999
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: befa4fc33c0faaded30ea05b9bd2cec5
Downloads: 402 seit dem 23 November 2014
Kostenlos herunterladen

Tektronix -- TDS 654C -- Serviceanleitung
Dateiname: Tektronix-9942-Manual-Page-1-Picture
Dokumenttyp: Serviceanleitung
Seitenanzahl: 330
Dateigröße: 4.28 Mbytes (4491816 Bytes)
Sprache: Englisch
Dokument-ID/Nummer: 071-0627-02
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: 800d42e6f00f29ebddae10b84749d59c
Downloads: 33 seit dem 25 Dezember 2017
This manual is divided into sections, such as Specifications
and Theory of
Operation. Further, it is divided into subsections, such as
Product Description
and Removal and Installation Procedures.
Sections containing procedures also contain introductions to
those procedures. Be
sure to read these introductions because they provide
information needed to do
the service correctly and efficiently. The following is a
brief description of each
manual section.
 Specifications contains a product description of the TDS
500D, TDS 600C,
TDS 700D and TDS 714L Oscilloscopes and tables of the
characteristics and
descriptions that apply to it.
 Operating Information includes general information and
operating instruc-
tions at the level needed to safely power on and service
this oscilloscope. A
statement of the service strategy that this manual supports,
and instructions
for shipment of the oscilloscopes are found in this section.
 Theory of Operation contains circuit descriptions that
support general service
and fault isolation.
 Performance Verification contains a collection of
procedures for confirming
that these oscilloscopes function properly and meet
warranted limits.
 Adjustment Procedures contains a collection of procedures
for adjusting
these oscilloscopes to meet warranted limits.

Maintenance contains information and procedures for doing
preventive and
corrective maintenance of these oscilloscopes. Instructions
for cleaning, for
module removal and installation, and for fault isolation to
a module are
found here.

Options contains information on servicing any of the
options that may be present in your oscilloscope.

Electrical Parts List contains a statement referring you to

Replaceable Parts, where both electrical and mechanical
modules are listed.

Diagrams contains a block diagram and an interconnection
diagram useful
for isolating failed modules.

Mechanical Parts List includes a table of all replaceable
modules, their
descriptions, and their Tektronix part numbers.
Kostenlos herunterladen

Tektronix -- TDS 654C -- Datenblatt
Dateiname: Tektronix-10019-Manual-Page-1-Picture
Dokumenttyp: Datenblatt
Seitenanzahl: 2
Dateigröße: 45.33 Kbytes (46417 Bytes)
Sprache: Englisch
Dokument-ID/Nummer: 55W-10066-6
Datum: 01 Januar 1998
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: 494126660c8c6fdf0e80d713016d8139
Downloads: 15 seit dem 28 Dezember 2017
Kostenlos herunterladen

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics