Geräte Informationen:

Wavetek 39 Generator
Hersteller:
Wavetek
Modell: 39
Datum: 1997
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: 30 MS/s Universal Waveform Generator
Informationen:
                                    This Synthesized Programmable Arbitrary Waveform Generator
uses a combination of direct digital synthesis and phase
lock loop techniques to provide high performance and
extensive facilities in a compact instrument. It can
generate a wide variety of waveforms between 0-1 mHz and
15MHzwith high resolution and accuracy.
Arbitrary waveforms may be defined with 12 bit vertical
resolution and from 4 to 65536 horizontal points. In
addition a number of standard waveforms are available
including sine, square, triangle, ramp and pulse.
Arbitrary waveforms may be replayed at a user specified
waveform frequency or period, or the sample rate may be
defined in terms of period or frequency.
Extensive waveform editing features between defined start
and end points are incorporated, including waveform insert,
point edit, line draw, amplitude adjust and invert. The
Model 39 is also supported by Wavetek’s WaveForm DSP2
arbitrary waveform creation software, which can download
waveforms via the RS232 or GPIB interfaces.
Up to 50 waveforms may be stored with the length and name
specified by the user. Waveforms may be strung together to
form a sequence of up to four steps. Each waveform may have
a user defined repeat count from 1 to 32768.
All waveforms can be swept over their full frequency range
at a rate variable between 30 milliseconds and 15 minutes.
Sweep can be linear or logarithmic, single or continuous.
Single sweeps can be triggered from the front panel, the
trigger input, or the digital interfaces. A sweep marker is
provided.
Amplitude Modulation is available for all waveforms and is
controlled from an external generator via the Ext VCA input.
All waveforms are available as a Triggered Burst whereby
each active edge of the trigger signal will produce one
burst of the carrier. The number of cycles in the burst can
be set between 1 and 1048575. The Gated mode turns the
output signal On when the gating signal is true and Off when
it is false. Both Triggered and Gated modes can be operated
from the internal Trigger Generator (0.005Hz to 50kHz), from
an external source (dc to 1MHz) or by a key press or remote
command.
The signals from the REF IN/OUT socket and the SYNC OUT
socket can be used to phase lock two or more generators.
This can be used to generate multi-phase waveforms or locked
waveforms of different frequencies.
The generator parameters are clearly displayed on a backlit
LCD with 4 rows of 20 characters. Soft-keys and sub menus
are used to guide the user through even the most complex
functions.
All parameters can be entered directly from the numeric
keypad. Alternatively most parameters can be incremented or
decremented using the rotary control. This system combines
quick and easy numeric data entry with quasi-analog
adjustment when required.
The generator has, as standard, both RS-232 and GPIB
interfaces which can be used for remote control of all of
the instrument functions or for the down-loading of
arbitrary waveforms; the GPIB interface conforms to IEEE-488.2.

Folgende Anleitungen sind für obiges Gerät verfügbar:

Wavetek -- 39 -- Bedienungsanleitung
Dateiname: Wavetek-6408-Manual-Page-1-Picture
Dokumenttyp: Bedienungsanleitung
Seitenanzahl: 90
Dateigröße: 22.97 Mbytes (24088455 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 850317-1
Datum: Juni 1997
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: af65bf83cff8723a6aba121463eeb9ea
ed2kID: 05824f17f197d8dcba433c30dd1ac133
Downloads: 92 seit 18 November 2014
Informationen:
Introduction 3
Specifications 4
Safety 10
EMC 11
Installation 11
Connections 13
Front Panel Connections 13
Rear Panel Connections 14
General 16
Initial Operation 16
Principles of Operation 18
Standard Waveform Operation 20
Setting Generator Parameters 20
Warnings and Error Messages 23
SYNC Output 24
Sweep Operation 25
General 25
Setting Sweep Parameters 26
Triggered Burst and Gate 29
General 29
Triggered Burst 30
Gated Mode 31
Sync Out in Triggered Burst and Gated Mode 31
Tone Mode 32
Other Modulation Modes 34
External VCA 34
External SUM In 34
Arbitrary Waveform Generation 36
Introduction 36
Creating New Waveforms 37
Modifying Arbitrary Waveforms 38
Arbitrary Waveform Sequence 43
Frequency and Amplitude Control with Arbitrary Waveforms 44
Sync Out Settings with Arbitrary Waveforms 45
Waveform Hold in Arbitrary Mode 46
Output Filter Setting 46
Pulse and Pulse-trains 47
Pulse Set-up 47
Pulse-train Setup 48
Waveform Hold in Pulse and Pulse-Train Modes 50
Synchronizing Generators 51
System Operations from the Utility Menu 53
Calibration 56
Remote Operation 58
Address and Baud Rate Selection 58
Remote/Local Operation 58
RS232 Interface 58
GPIB Interface 61
Power on Settings 63
Status Reporting 64
RS232 Remote Command Formats 66
GPIB Remote Command Formats 68
Remote Commands 68
Frequency and Period 68
Amplitude and DC Offset 68
Waveform Selection and Definition 69
Waveform Sequence Control 70
Arbitrary Waveform Editing 71
Mode Commands 72
Input/Output control 72
Status Commands 73
Miscellaneous Commands 74
Remote Command Summary 75
Appendix 1. Warning and Error Messages 79
Appendix 2. SYNC OUT Automatic Settings 82
Appendix 3. Factory System Defaults 83
Wavetek-6408-Manual-Page-1-Picture
Kostenlos herunterladen


Kommentare

Noch keine Kommentare vorhanden.

Kommentar Hinzufügen

* Pflichtfeld
(wird nicht veröffentlicht)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the third letter of the word castle.
 
Die Antwort lautet:
 
Informiere mich via E-Mail über neue Kommentare.
 
Meine Daten auf diesem Computer.
 
 
Powered by Commentics